Engine-Codes.com
Engine-Codes – Nissan – P0113 2010 Nissan Rogue

P0113 2010 Nissan Rogue Code - Intake Air Temperature Sensor Circuit High

Quick Answer

The P0113 code on a 2010 Nissan Rogue indicates a problem with the Intake Air Temperature (IAT) sensor circuit registering a high voltage. Common causes include Faulty Intake Air Temperature (IAT) sensor, Damaged or corroded wiring/connectors in the sensor circuit, Malfunctioning Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0113 2010 Nissan Rogue indicates Intake Air Temperature Sensor Circuit High.
Common causes
Common causes include Faulty Intake Air Temperature (IAT) sensor, Damaged or corroded wiring/connectors in the sensor circuit, Malfunctioning Engine Control Module (ECM).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0113 2010 Nissan Rogue Description

The P0113 code on a 2010 Nissan Rogue indicates a problem with the Intake Air Temperature (IAT) sensor circuit registering a high voltage. The IAT sensor is responsible for measuring the temperature of the air entering the engine. This information is crucial for the engine control module (ECM) to adjust fuel delivery and ignition timing, optimizing engine performance and efficiency. When the sensor circuit reports a high voltage reading, it suggests that the intake air temperature is abnormally high, potentially leading to incorrect fuel mixture and ignition timing, which can result in poor engine performance, reduced fuel efficiency, and increased emissions.

OBDII Code P0113 2010 Nissan Rogue - Intake Air Temperature Sensor Circuit High
P0113 2010 Nissan Rogue Code - Intake Air Temperature Sensor Circuit High

Common Causes of P0113 2010 Nissan Rogue

  1. Faulty Intake Air Temperature (IAT) sensor
  2. Damaged or corroded wiring/connectors in the sensor circuit
  3. Malfunctioning Engine Control Module (ECM)
  4. Issues with the intake air system, such as leaks or restrictions
  5. Extreme heat exposure causing sensor malfunction

Symptoms of P0113 2010 Nissan Rogue

  1. Decreased fuel efficiency
  2. Engine hesitation or stalling
  3. Check Engine Light (CEL) illuminated on the dashboard
  4. Rough idle or rough engine performance
  5. Reduced engine power

How to Fix P0113 2010 Nissan Rogue

  1. Begin by locating the IAT sensor, typically located in the air intake duct near the air filter box.
  2. Inspect the wiring and connectors for any signs of damage, corrosion, or loose connections.
  3. Test the IAT sensor using a multimeter to check for proper resistance values at different temperatures.
  4. If the sensor is faulty, replace it with a new one and ensure proper installation and connection.
  5. Clear the diagnostic trouble codes, reset the ECM, and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0113 2010 Nissan Rogue

The cost of repairing the Intake Air Temperature Sensor Circuit High issue on a 2010 Nissan Rogue can vary depending on the specific cause of the problem. In general, the cost of a new IAT sensor can range from $30 to $100, depending on the brand and quality. Labor costs for this repair can range from $80 to $150 per hour, with the total repair time typically taking around 1-2 hours. Therefore, the total repair cost for this issue could range from $110 to $400, including parts and labor. It's always recommended to get a personalized quote from a trusted auto repair shop to get an accurate estimate based on your location and vehicle specifics.

What does this mean?

Tech Notes for P0113 2010 Nissan Rogue

Intake Air Temperature (IAT) sensor is built into the Mass air flow sensor, you can try to clean it with Mass air flow sensor cleaner before doing anything else and reset the engine light.

When is the Code Detected?

- An excessively high voltage from the sensor is sent to ECM.

Need more information about the P0113 2010 Nissan Rogue code?

Need more information on how to fix the P0113 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0113 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0113 2010 Nissan Rogue Code

1. What does OBDII code P0113 on a 2010 Nissan Rogue mean?

The code P0113 indicates an issue with the Intake Air Temperature (IAT) sensor circuit, specifically that the sensor is reading a high voltage.

2. What are the common symptoms of a P0113 error code in a 2010 Nissan Rogue?

Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and in some cases, the Check Engine light may illuminate.

3. What are the possible causes of a P0113 code in a 2010 Nissan Rogue?

Potential causes include a faulty IAT sensor, damaged wiring or connectors in the sensor circuit, a dirty air filter, or issues with the engine's air intake system.

4. How can I diagnose a P0113 error code in my 2010 Nissan Rogue?

Diagnosing a P0113 code typically involves checking the IAT sensor and its wiring for damage, cleaning or replacing the air filter, and inspecting the air intake system for any obstructions.

5. Can I drive my 2010 Nissan Rogue with a P0113 error code?

It is not recommended to drive your vehicle with a P0113 code as it can lead to poor engine performance and potentially cause further damage to the engine.

6. How can I repair a P0113 error code in my 2010 Nissan Rogue?

To repair a P0113 code, you may need to replace the IAT sensor, repair any damaged wiring or connectors, clean or replace the air filter, and ensure the air intake system is functioning properly.

7. Can a DIY enthusiast fix a P0113 error code in a 2010 Nissan Rogue?

Depending on your mechanical skills and knowledge, you may be able to address a P0113 code yourself by following a repair manual or seeking guidance from online resources.

8. Will resetting the Check Engine light resolve a P0113 error code in a 2010 Nissan Rogue?

Simply resetting the Check Engine light will not fix the underlying issue causing the P0113 code. It is important to diagnose and repair the root cause of the problem.

9. How much does it cost to fix a P0113 error code in a 2010 Nissan Rogue?

The cost of repairing a P0113 code can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to address the problem yourself or have a professional mechanic do the work.

10. How often does a P0113 error code occur in a 2010 Nissan Rogue?

A P0113 code can occur sporadically or more frequently depending on the severity of the underlying issue. It is essential to address the problem promptly to prevent further complications.

Discuss the causes and fixes for P0113 2010 Nissan Rogue OBDII Code

Submit a New Comment

Code P0113 2010 Nissan Rogue comments

No comments found for this page.