P0112 Pontiac Code - Intake Air Temperature Sensor Circuit Low Voltage
Quick Answer
The P0112 diagnostic trouble code (DTC) for Pontiac vehicles indicates a problem with the Intake Air Temperature (IAT) sensor circuit, specifically reporting low voltage. Common causes include Faulty IAT Sensor: The most common cause of the P0112 code is a malfunctioning IAT sensor that is sending incorrect voltage signals to the ECU, Damaged Wiring: Wiring harness issues, such as frayed or broken wires, can disrupt the voltage signal from the IAT sensor to the ECU, Poor Electrical Connection: Corrosion or poor connections at the sensor or ECU can lead to voltage irregularities and trigger the P0112 code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 Pontiac indicates Intake Air Temperature Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty IAT Sensor: The most common cause of the P0112 code is a malfunctioning IAT sensor that is sending incorrect voltage signals to the ECU, Damaged Wiring: Wiring harness issues, such as frayed or broken wires, can disrupt the voltage signal from the IAT sensor to the ECU, Poor Electrical Connection: Corrosion or poor connections at the sensor or ECU can lead to voltage irregularities and trigger the P0112 code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0112 Pontiac Description
The P0112 diagnostic trouble code (DTC) for Pontiac vehicles indicates a problem with the Intake Air Temperature (IAT) sensor circuit, specifically reporting low voltage. The IAT sensor is a crucial component of the engine management system, as it measures the temperature of the incoming air to help the engine control unit (ECU) adjust the air-fuel mixture for optimal combustion. When the voltage from the IAT sensor is lower than expected, it can lead to various performance issues and potentially cause long-term damage if left unaddressed.
Common Causes of P0112 Pontiac
- Faulty IAT Sensor: The most common cause of the P0112 code is a malfunctioning IAT sensor that is sending incorrect voltage signals to the ECU.
- Damaged Wiring: Wiring harness issues, such as frayed or broken wires, can disrupt the voltage signal from the IAT sensor to the ECU.
- Poor Electrical Connection: Corrosion or poor connections at the sensor or ECU can lead to voltage irregularities and trigger the P0112 code.
- ECU Malfunction: In rare cases, a problem with the engine control unit itself can cause erroneous readings from the IAT sensor, resulting in the code.
- Intake Air Restriction: Any restriction in the intake air path, such as a clogged air filter or blocked intake duct, can affect the IAT sensor readings and trigger the code.
Symptoms of P0112 Pontiac
- Check Engine Light: The most common symptom associated with the P0112 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Rough Idle: A faulty IAT sensor can cause the engine to idle roughly or inconsistently, as the ECU struggles to adjust the air-fuel mixture.
- Decreased Fuel Efficiency: Incorrect air temperature readings can lead to inefficient combustion, resulting in decreased fuel efficiency and potentially higher fuel consumption.
- Engine Stalling: In severe cases, a malfunctioning IAT sensor can cause the engine to stall unexpectedly, especially during acceleration or deceleration.
- Poor Performance: The vehicle may experience a loss of power, hesitation, or sluggish acceleration due to inaccurate air temperature readings affecting the fuel delivery.
How to Fix P0112 Pontiac
- Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a visual inspection of the IAT sensor and wiring harness for any visible damage.
- Test the IAT Sensor: Measure the resistance of the IAT sensor using a multimeter to determine if it is within the manufacturer's specifications.
- Check Wiring and Connections: Inspect the wiring harness for any damage or corrosion, and ensure that the connections at the sensor and ECU are secure.
- Replace the IAT Sensor: If the sensor is faulty, replace it with a new one and clear the DTC from the ECU memory.
- Clear DTC and Test Drive: After completing the repair, clear the DTC with a scan tool and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P0112 Pontiac
The typical repair costs for addressing the P0112 code on a Pontiac vehicle can vary depending on the specific model and year. In general, the cost of a new IAT sensor ranges from $20 to $50, while labor charges for diagnosis and replacement can range from $80 to $150 per hour. Therefore, the total repair cost for this issue may fall within the range of $100 to $300, including parts and labor. It's important to note that actual costs may vary based on the location of the repair shop, the vehicle's make and model, and any additional repairs or services that may be required. It's recommended to consult with a trusted mechanic or dealership for a more accurate estimate based on your specific circumstances.
When is the Code Detected?
Need more information about the P0112 Pontiac code?
Need more information on how to fix the P0112 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 Pontiac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 Pontiac Code
What does the OBDII code P0112 mean for a Pontiac?
P0112 indicates that the intake air temperature (IAT) sensor is reporting a voltage that is too low, likely due to a fault in the sensor or its circuit.
What are common symptoms of code P0112?
Symptoms may include poor engine performance, rough idling, reduced fuel efficiency, and the check engine light being illuminated.
What causes P0112 to trigger on a Pontiac?
Possible causes include a faulty IAT sensor, damaged wiring or connectors, shorted circuits, or an issue with the engine control module (ECM).
Can I drive my Pontiac with code P0112?
While the vehicle may still be drivable, ignoring the code can lead to engine performance issues and increased fuel consumption. It’s best to address the problem promptly.
How do I diagnose code P0112?
Use an OBDII scanner to confirm the code, and then inspect the IAT sensor, wiring, and connectors for damage or corrosion. Test the sensor’s voltage with a multimeter.
How can I fix code P0112 on my Pontiac?
Repairs may include replacing the IAT sensor, repairing or replacing damaged wiring or connectors, or updating/reprogramming the ECM if necessary.
Where is the intake air temperature sensor located on a Pontiac?
The IAT sensor is typically located near the air intake system, often within or close to the air filter housing.
Can a dirty air filter cause code P0112?
A dirty air filter is unlikely to directly cause P0112, but it can affect airflow and engine performance, contributing to related issues.
How much does it cost to repair code P0112?
Repair costs vary but typically range from $100 to $250 for parts and labor, depending on the severity of the issue and the specific Pontiac model.
Is it necessary to reset the ECM after fixing P0112?
Yes, after repairs, it’s recommended to clear the code with an OBDII scanner to reset the ECM and verify the problem has been fixed.
Discuss the causes and fixes for P0112 Pontiac OBDII Code
Code P0112 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.