P0112 Mercedes-Benz Code - Intake Air Temperature Circuit Low Input
Quick Answer
The P0112 code for Mercedes-Benz indicates a problem with the Intake Air Temperature (IAT) sensor circuit, specifically a low input signal. Common causes include Faulty or damaged IAT sensor, Wiring or connector issues in the IAT sensor circuit, Corrosion or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 Mercedes-Benz indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty or damaged IAT sensor, Wiring or connector issues in the IAT sensor circuit, Corrosion or poor connections in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0112 Mercedes-Benz Description
The P0112 code for Mercedes-Benz indicates a problem with the Intake Air Temperature (IAT) sensor circuit, specifically a low input signal. The IAT sensor is responsible for measuring the temperature of the air entering the engine. This information is crucial for the engine control unit (ECU) to adjust the air-fuel mixture and ignition timing, ensuring optimal performance and fuel efficiency. When the ECU detects a low input signal from the IAT sensor, it may not be able to accurately adjust these parameters, leading to potential issues with engine performance and emissions.
Common Causes of P0112 Mercedes-Benz
- Faulty or damaged IAT sensor
- Wiring or connector issues in the IAT sensor circuit
- Corrosion or poor connections in the sensor circuit
- ECU malfunction affecting the IAT sensor input
- Intake air leaks near the sensor causing inaccurate readings
Symptoms of P0112 Mercedes-Benz
- Decreased fuel efficiency
- Engine hesitation during acceleration
- Rough idling or stalling
- Check Engine Light illuminated
- Reduced engine performance
How to Fix P0112 Mercedes-Benz
- Begin by locating the IAT sensor in the intake air duct or manifold.
- Inspect the sensor and its wiring for any signs of damage, corrosion, or loose connections.
- Test the sensor using a multimeter to check for proper resistance readings.
- If the sensor is faulty, replace it with a new OEM or high-quality aftermarket sensor.
- Clear the diagnostic trouble codes using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0112 Mercedes-Benz
The cost of repairing a P0112 code on a Mercedes-Benz can vary depending on the specific model and year of the vehicle, as well as the location and labor rates of the auto repair shop. On average, replacing an IAT sensor can cost between $100 and $200, including parts and labor. However, additional diagnostic time may be required to pinpoint the exact cause of the issue, so it's advisable to consult with a professional technician for a more accurate estimate.
When is the Code Detected?
Need more information about the P0112 Mercedes-Benz code?
Need more information on how to fix the P0112 Mercedes-Benz code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 Mercedes-Benz code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 Mercedes-Benz Code
1. What are the common symptoms of OBDII code P0112 in a Mercedes-Benz?
- Common symptoms include stalling, rough idle, poor fuel economy, and a noticeable decrease in engine performance.
2. What does the OBDII code P0112 for Intake Air Temperature Circuit Low Input mean in a Mercedes-Benz?
- This code indicates that the Engine Control Module (ECM) has detected a lower-than-expected voltage from the intake air temperature sensor.
3. What are the possible causes of OBDII code P0112 in a Mercedes-Benz?
- Potential causes include a faulty intake air temperature sensor, damaged wiring or connectors, a disconnected sensor, or issues with the ECM.
4. How can I diagnose the issue causing OBDII code P0112 in my Mercedes-Benz?
- You can use a multimeter to test the intake air temperature sensor for proper voltage output, inspect the wiring and connectors for damage, and check for any loose connections.
5. Can a dirty air filter trigger OBDII code P0112 in a Mercedes-Benz?
- Yes, a clogged or dirty air filter can disrupt the intake air temperature readings, potentially leading to a P0112 fault code.
6. Is it safe to continue driving my Mercedes-Benz with OBDII code P0112 present?
- It is not recommended to drive your vehicle with this code as it can lead to further engine damage and decreased performance.
7. How can I reset the OBDII code P0112 in my Mercedes-Benz after making repairs?
- You can reset the code using an OBDII scanner or by disconnecting the car's battery for a few minutes.
8. Are there any DIY repair tips for fixing OBDII code P0112 in a Mercedes-Benz?
- DIY repair tips include checking and cleaning the intake air temperature sensor, inspecting and repairing damaged wiring, and ensuring all connections are secure.
9. Will OBDII code P0112 cause my Mercedes-Benz to fail an emissions test?
- Yes, this code can cause your vehicle to fail an emissions test due to increased emissions and poor engine performance.
10. How much can I expect to pay to repair OBDII code P0112 in a Mercedes-Benz at a mechanic or dealership?
- Repair costs can vary depending on the exact cause of the issue, but you can expect to pay anywhere from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0112 Mercedes-Benz OBDII Code
Code P0112 Mercedes-Benz comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.