P0112 2017 Toyota RAV4 Code - Intake Air Temperature Circuit Low Input
Quick Answer
The P0112 diagnostic trouble code (DTC) for a 2017 Toyota RAV4 indicates that there is a low input signal coming from the Intake Air Temperature (IAT) sensor circuit. Common causes include Faulty Intake Air Temperature sensor, Wiring issues or poor connections in the IAT sensor circuit, Corrosion or contamination affecting the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2017 Toyota RAV4 indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature sensor, Wiring issues or poor connections in the IAT sensor circuit, Corrosion or contamination affecting the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0112 2017 Toyota RAV4 Description
The P0112 diagnostic trouble code (DTC) for a 2017 Toyota RAV4 indicates that there is a low input signal coming from the Intake Air Temperature (IAT) sensor circuit. The IAT sensor is responsible for measuring the temperature of the air entering the engine, which is crucial for the engine control unit to adjust the air-fuel mixture for optimal combustion. A low input signal suggests that the temperature reading is lower than expected, which can lead to incorrect fuel calculations and affect the engine's performance.
Common Causes of P0112 2017 Toyota RAV4
- Faulty Intake Air Temperature sensor
- Wiring issues or poor connections in the IAT sensor circuit
- Corrosion or contamination affecting the sensor
- Engine coolant temperature sensor malfunction
- ECM (Engine Control Module) software issues
Symptoms of P0112 2017 Toyota RAV4
- Decreased fuel efficiency
- Reduced engine performance
- Rough idling or stalling
- Hesitation during acceleration
- Check Engine Light illuminated
How to Fix P0112 2017 Toyota RAV4
- Begin by diagnosing the root cause of the issue using a scan tool to confirm the P0112 code.
- Inspect the IAT sensor and its wiring for any signs of damage, corrosion, or poor connections.
- Test the sensor's resistance and voltage output to determine if it is functioning correctly.
- Replace the faulty IAT sensor if necessary, ensuring proper installation and connection.
- Clear the DTC and perform a test drive to verify that the issue has been resolved.
Cost to Fix P0112 2017 Toyota RAV4
The cost of repairing a P0112 code on a 2017 Toyota RAV4 can vary depending on the specific cause of the issue. Replacement IAT sensors typically range from $20 to $100, with labor costs averaging between $80 and $150 per hour. Overall, the total repair cost could range from $100 to $300 or more, depending on the extent of the repairs needed. It's advisable to consult with a qualified mechanic or repair shop for an accurate estimate based on your vehicle's specific requirements.
Need more information about the P0112 2017 Toyota RAV4 code?
Need more information on how to fix the P0112 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2017 Toyota RAV4 Code
What does the OBDII code P0112 mean for a 2017 Toyota RAV4?
Code P0112 indicates the Intake Air Temperature (IAT) sensor is reporting an unusually low input voltage, suggesting a low temperature reading.
What are the symptoms of code P0112 in a 2017 Toyota RAV4?
Symptoms may include poor engine performance, reduced fuel efficiency, hard starts, and the Check Engine Light illuminating.
What causes the P0112 code in a 2017 Toyota RAV4?
Possible causes include a faulty IAT sensor, damaged wiring or connectors, a short circuit, or excessive dirt buildup on the sensor.
Can I drive my 2017 Toyota RAV4 with code P0112 active?
While the vehicle may still run, driving with this code can lead to poor fuel efficiency and potential damage to engine components over time.
How do you fix the P0112 code on a 2017 Toyota RAV4?
Common fixes include inspecting and replacing the IAT sensor, repairing damaged wiring or connectors, and clearing the code with an OBDII scanner.
Where is the IAT sensor located on a 2017 Toyota RAV4?
The IAT sensor is typically located in the intake manifold or air intake hose, near the air filter housing.
How can I test the IAT sensor on a 2017 Toyota RAV4?
You can test the IAT sensor using a multimeter to check its resistance values at different temperatures and compare them to the manufacturer’s specifications.
What happens if I ignore code P0112 on my 2017 Toyota RAV4?
Ignoring this code can lead to long-term engine inefficiency, increased emissions, and possible damage to other engine components.
How much does it cost to repair code P0112 on a 2017 Toyota RAV4?
Repair costs vary but typically range from $50 to $200 for parts and labor, depending on whether the sensor or wiring needs replacement.
Can a dirty air filter cause code P0112 on a 2017 Toyota RAV4?
Yes, a dirty air filter can restrict airflow and potentially affect the IAT sensor’s readings, but it’s not a common cause of this code.
Discuss the causes and fixes for P0112 2017 Toyota RAV4 OBDII Code
Code P0112 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.