P0112 2014 Toyota RAV4 Code - Intake Air Temperature Circuit Low Input
Quick Answer
The P0112 diagnostic trouble code (DTC) for a 2014 Toyota RAV4 refers to the Intake Air Temperature (IAT) Circuit Low Input. Common causes include Faulty Intake Air Temperature (IAT) sensor, Wiring or connector issues in the IAT circuit, Malfunctioning Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2014 Toyota RAV4 indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Wiring or connector issues in the IAT circuit, Malfunctioning Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0112 2014 Toyota RAV4 Description
The P0112 diagnostic trouble code (DTC) for a 2014 Toyota RAV4 refers to the Intake Air Temperature (IAT) Circuit Low Input. This code indicates that the Engine Control Module (ECM) has detected a lower than expected voltage from the intake air temperature sensor. The IAT sensor is responsible for measuring the temperature of the air entering the engine, which is crucial for the engine management system to adjust the air-fuel mixture for optimal combustion.
Common Causes of P0112 2014 Toyota RAV4
- Faulty Intake Air Temperature (IAT) sensor
- Wiring or connector issues in the IAT circuit
- Malfunctioning Engine Control Module (ECM)
- Vacuum leak in the intake system
- Incorrect IAT sensor placement or installation
Symptoms of P0112 2014 Toyota RAV4
- Decreased fuel efficiency
- Engine running rich
- Rough idle or stalling
- Check Engine Light illuminated
- Reduced engine performance
How to Fix P0112 2014 Toyota RAV4
- Begin by visually inspecting the wiring and connectors in the IAT circuit for any damage or corrosion.
- Test the IAT sensor using a multimeter to check for proper resistance values at different temperatures.
- If the sensor is faulty, replace it with a new one and ensure it is properly calibrated.
- Clear the DTC with a scan tool and test drive the vehicle to verify that the issue has been resolved.
- If the problem persists, further diagnosis may be required to identify any underlying issues with the ECM or intake system.
Cost to Fix P0112 2014 Toyota RAV4
The cost of repairing a P0112 code on a 2014 Toyota RAV4 can vary depending on the specific cause of the issue. In general, replacing an IAT sensor can cost between $50 and $100, while labor costs may range from $50 to $150. If additional repairs are necessary, such as addressing wiring or ECM issues, the total cost could increase significantly. It is recommended to consult with a professional mechanic or dealership for an accurate estimate based on the specific diagnosis and repair requirements.
Need more information about the P0112 2014 Toyota RAV4 code?
Need more information on how to fix the P0112 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2014 Toyota RAV4 Code
What does the OBDII code P0112 mean on a 2014 Toyota RAV4?
P0112 indicates that the intake air temperature (IAT) sensor is reporting a voltage signal lower than expected, suggesting an abnormally low air temperature reading.
What are the symptoms of code P0112 on a 2014 Toyota RAV4?
Symptoms may include poor engine performance, decreased fuel efficiency, rough idling, and possibly an illuminated check engine light.
What causes the P0112 code on a 2014 Toyota RAV4?
Common causes include a faulty IAT sensor, damaged or corroded wiring, a short circuit, or a malfunctioning engine control module (ECM).
Can I drive my 2014 Toyota RAV4 with the P0112 code?
While the vehicle may still be drivable, continued operation with this code can lead to decreased performance and potential damage to other components over time.
How do I fix the P0112 code on a 2014 Toyota RAV4?
Inspect and repair any damaged wiring or connectors, clean or replace the IAT sensor if necessary, and reset the code to see if the issue persists.
Where is the IAT sensor located on a 2014 Toyota RAV4?
The IAT sensor is typically located on or near the air intake system, often attached to the air filter housing or intake manifold.
How do I test the IAT sensor on a 2014 Toyota RAV4?
Use a multimeter to measure the sensor's resistance or voltage. Compare the readings to the manufacturer's specifications to determine if the sensor is functioning properly.
Can a dirty air filter cause the P0112 code on a 2014 Toyota RAV4?
A dirty air filter is unlikely to directly cause the P0112 code but can contribute to airflow issues that may exacerbate other intake system problems.
How much does it cost to fix the P0112 code on a 2014 Toyota RAV4?
Repair costs can vary. Replacing an IAT sensor typically costs between $50 and $150, while wiring repairs may cost more depending on the extent of the damage.
Does the P0112 code affect emissions on a 2014 Toyota RAV4?
Yes, a faulty IAT sensor can negatively impact the air-fuel mixture, potentially increasing emissions and causing the vehicle to fail an emissions test.
Discuss the causes and fixes for P0112 2014 Toyota RAV4 OBDII Code
Code P0112 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.