P0112 2010 Ford Fusion Code - Intake Air Temperature Sensor Circuit Low Input
Quick Answer
The P0112 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates that there is a low input signal from the Intake Air Temperature (IAT) sensor circuit. Common causes include Faulty Intake Air Temperature (IAT) sensor, Damaged or corroded wiring in the IAT sensor circuit, Loose or poor connection at the IAT sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2010 Ford Fusion indicates Intake Air Temperature Sensor Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Damaged or corroded wiring in the IAT sensor circuit, Loose or poor connection at the IAT sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0112 2010 Ford Fusion Description
The P0112 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates that there is a low input signal from the Intake Air Temperature (IAT) sensor circuit. The IAT sensor is responsible for measuring the temperature of the air entering the engine. This information is crucial for the engine control module (ECM) to adjust the air-fuel mixture and ignition timing to optimize engine performance and fuel efficiency.
Common Causes of P0112 2010 Ford Fusion
- Faulty Intake Air Temperature (IAT) sensor
- Damaged or corroded wiring in the IAT sensor circuit
- Loose or poor connection at the IAT sensor
- ECM malfunction
- Intake air leaks near the sensor
Symptoms of P0112 2010 Ford Fusion
- Check Engine Light illuminated on the dashboard
- Reduced fuel efficiency
- Engine running rich or lean
- Rough idling
- Potential stalling
How to Fix P0112 2010 Ford Fusion
- Begin by locating the IAT sensor, typically located near the air intake manifold.
- Inspect the wiring and connections for any damage or corrosion. Repair or replace as needed.
- Test the IAT sensor using a multimeter to check for proper resistance values.
- If the sensor is faulty, replace it with a new one following the manufacturer's instructions.
- Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0112 2010 Ford Fusion
The typical repair costs for addressing a P0112 code on a 2010 Ford Fusion can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. Factors such as location, vehicle make and model, and engine type can also impact the final repair costs. It's advisable to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on your specific circumstances.
Tech Notes for P0112 2010 Ford Fusion
Need more information about the P0112 2010 Ford Fusion code?
Need more information on how to fix the P0112 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2010 Ford Fusion Code
1. What does the OBDII code P0112 mean on a 2010 Ford Fusion?
P0112 indicates that the Intake Air Temperature (IAT) sensor is reporting a voltage signal that is too low, suggesting the sensor is detecting an abnormally low air temperature.
2. What are common symptoms of code P0112 on a 2010 Ford Fusion?
Symptoms may include poor engine performance, reduced fuel efficiency, hard starting, black exhaust smoke, or the check engine light being illuminated.
3. What causes the P0112 code on a 2010 Ford Fusion?
Common causes include a faulty IAT sensor, damaged or corroded wiring, a short circuit, or a defective Engine Control Module (ECM).
4. Can I drive my 2010 Ford Fusion with code P0112?
Driving with this code is possible, but it is not recommended as it may lead to poor performance, increased emissions, and potential long-term engine damage if not addressed.
5. How do I fix code P0112 on a 2010 Ford Fusion?
Start by inspecting and cleaning the IAT sensor, checking the wiring for damage, and ensuring the connections are secure. If necessary, replace the IAT sensor.
6. Where is the IAT sensor located on a 2010 Ford Fusion?
The IAT sensor is typically located near the air intake or integrated into the Mass Air Flow (MAF) sensor housing in the intake system.
7. How much does it cost to repair the P0112 code on a 2010 Ford Fusion?
Repair costs can range from $20 to $100 for a replacement IAT sensor, plus labor costs if you have a mechanic perform the repair.
8. How can I test the IAT sensor on my 2010 Ford Fusion?
You can test the IAT sensor using a multimeter to measure its resistance at different temperatures and compare the readings to the manufacturer’s specifications.
9. Can a dirty air filter cause the P0112 code on a 2010 Ford Fusion?
A dirty air filter is unlikely to directly cause P0112, but it can affect airflow and sensor readings, so it’s worth checking as part of the diagnosis.
10. Will resetting the check engine light fix the P0112 code on a 2010 Ford Fusion?
Resetting the light may clear the code temporarily, but if the underlying issue is not fixed, the code will likely return.
Discuss the causes and fixes for P0112 2010 Ford Fusion OBDII Code
Code P0112 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.