P0112 2007 Scion xB Code - Intake Air Temperature Circuit Low Input
Quick Answer
The P0112 code for a 2007 Scion xB indicates that there is a low input in the Intake Air Temperature (IAT) circuit. Common causes include Faulty IAT sensor, Damaged wiring or connectors in the IAT circuit, Corrosion or contamination in the sensor or connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2007 Scion xB indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty IAT sensor, Damaged wiring or connectors in the IAT circuit, Corrosion or contamination in the sensor or connector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0112 2007 Scion xB Description
The P0112 code for a 2007 Scion xB indicates that there is a low input in the Intake Air Temperature (IAT) circuit. The IAT sensor is responsible for measuring the temperature of the air entering the engine. This information is crucial for the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion.
Common Causes of P0112 2007 Scion xB
- Faulty IAT sensor
- Damaged wiring or connectors in the IAT circuit
- Corrosion or contamination in the sensor or connector
- ECM malfunction
Symptoms of P0112 2007 Scion xB
- Decreased fuel efficiency
- Rough idling
- Hesitation or stumbling during acceleration
- Check Engine Light illuminated
- Reduced engine performance
How to Fix P0112 2007 Scion xB
- Begin by diagnosing the issue using a scan tool to retrieve the trouble code and inspect the IAT sensor and its wiring for any visible damage.
- Test the IAT sensor using a multimeter to check for proper resistance values at different temperatures.
- Replace the IAT sensor if it is found to be faulty or out of specification.
- Inspect and repair any damaged wiring or connectors in the IAT circuit.
- Clear the trouble code from the ECM's memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0112 2007 Scion xB
The typical repair costs for resolving a P0112 code on a 2007 Scion xB can vary depending on the specific cause of the issue. On average, the cost of replacing an IAT sensor can range from $50 to $150, while the labor cost for diagnosis and repair can range from $100 to $300. It is important to note that these are rough estimates, and actual costs may vary based on the location, labor rates, and additional parts or services required. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate.
When is the Code Detected?
Need more information about the P0112 2007 Scion xB code?
Need more information on how to fix the P0112 2007 Scion xB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2007 Scion xB code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2007 Scion xB Code
1. What are the common symptoms of OBDII code P0112 on a 2007 Scion xB?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What does the OBDII code P0112 indicate in a 2007 Scion xB?
- The code P0112 indicates that the Intake Air Temperature (IAT) sensor circuit is detecting a low input signal.
3. What are the possible causes of OBDII code P0112 on a 2007 Scion xB?
- Possible causes include a faulty IAT sensor, damaged wiring or connectors in the IAT circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0112 on my 2007 Scion xB?
- You can diagnose the issue by checking the IAT sensor for proper operation, inspecting the wiring and connectors for damage, and using a multimeter to test the circuit.
5. Can a dirty air filter cause OBDII code P0112 on a 2007 Scion xB?
- While a dirty air filter can affect engine performance, it typically does not trigger the P0112 code. Focus on checking the IAT sensor and related components first.
6. Is it safe to continue driving with OBDII code P0112 present on a 2007 Scion xB?
- It is generally not recommended to drive with the P0112 code active, as it can lead to further engine issues and potential damage over time.
7. How can I reset the OBDII code P0112 on my 2007 Scion xB?
- You can reset the code using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the ECM's memory.
8. Will OBDII code P0112 cause the check engine light to illuminate on a 2007 Scion xB?
- Yes, the P0112 code will trigger the check engine light to illuminate on the dashboard of your 2007 Scion xB.
9. Can a DIY enthusiast repair OBDII code P0112 on a 2007 Scion xB?
- Depending on your mechanical skills, you may be able to replace the IAT sensor or repair wiring issues yourself. However, more complex problems may require professional assistance.
10. What is the typical cost to repair OBDII code P0112 on a 2007 Scion xB at a mechanic or dealership?
- The cost of repairing the P0112 code can vary depending on the exact cause, but it may range from $100 to $300 at a mechanic or dealership.
Discuss the causes and fixes for P0112 2007 Scion xB OBDII Code
Code P0112 2007 Scion xB comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.