P0110 2006 TOYOTA CAMRY - Intake Air Temperature Circuit Malfunction
P0110 2006 TOYOTA CAMRY Possible Causes
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How do I fix code P0110 2006 TOYOTA CAMRY
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
P0110 2006 TOYOTA CAMRY Tech NotesIntake Air Temperature (IAT) sensor is built into the Mass Air Flow Sensor. You can try to clean it with Mass Air Flow Sensor cleaner and reset the code.
Cost of diagnosing the P0110 2006 TOYOTA CAMRY code
Labor: 1.0The cost of diagnosing the P0110 2006 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0110 2006 TOYOTA CAMRY code detected?An excessively low or high voltage from the sensor is sent to ECM.
P0110 2006 TOYOTA CAMRY Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0110 2006 TOYOTA CAMRY MeaningThe Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM). The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
P0110 2006 TOYOTA CAMRY More InformationNeed more information on how to fix the P0110 2006 TOYOTA CAMRY code?
Get Access to Factory Service Manuals