P0108 2015 GMC Sierra Code - Manifold Absolute Pressure/Barometric Pressure Circuit High Input
Quick Answer
The P0108 code for a 2015 GMC Sierra indicates a problem with the Manifold Absolute Pressure (MAP) sensor or the Barometric Pressure (BARO) sensor circuit showing a high input signal. Common causes include Faulty MAP/BARO Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECM, Damaged Wiring or Connectors: Corrosion, fraying, or loose connections in the wiring harness can disrupt the signal between the sensor and the ECM, Vacuum Leak: A leak in the intake manifold or vacuum lines can affect the pressure readings and trigger the code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0108 2015 GMC Sierra indicates Manifold Absolute Pressure/Barometric Pressure Circuit High Input.
- Common causes
- Common causes include Faulty MAP/BARO Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECM, Damaged Wiring or Connectors: Corrosion, fraying, or loose connections in the wiring harness can disrupt the signal between the sensor and the ECM, Vacuum Leak: A leak in the intake manifold or vacuum lines can affect the pressure readings and trigger the code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0108 2015 GMC Sierra Description
The P0108 code for a 2015 GMC Sierra indicates a problem with the Manifold Absolute Pressure (MAP) sensor or the Barometric Pressure (BARO) sensor circuit showing a high input signal. The MAP sensor measures the pressure in the intake manifold, which is used by the engine control module (ECM) to calculate the air density and adjust fuel delivery and ignition timing. The BARO sensor provides information about the atmospheric pressure, which is essential for accurate fuel delivery adjustments at different altitudes.
Common Causes of P0108 2015 GMC Sierra
- Faulty MAP/BARO Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECM.
- Damaged Wiring or Connectors: Corrosion, fraying, or loose connections in the wiring harness can disrupt the signal between the sensor and the ECM.
- Vacuum Leak: A leak in the intake manifold or vacuum lines can affect the pressure readings and trigger the code.
- ECM Malfunction: A rare possibility is that the ECM itself is faulty and not processing the sensor data correctly.
- Engine Mechanical Issue: In some cases, a mechanical problem within the engine, such as a leaking gasket or a failing turbocharger, can also cause high pressure readings.
Symptoms of P0108 2015 GMC Sierra
- Check Engine Light: The most common symptom associated with the P0108 code is the illumination of the check engine light on the dashboard.
- Reduced Engine Performance: The engine may experience reduced power, hesitation, or surging during acceleration.
- Rough Idling: The engine may idle erratically or stall when at a stop.
- Decreased Fuel Efficiency: Due to incorrect fuel delivery adjustments, the vehicle may consume more fuel than usual.
- Emission Issues: The vehicle may not pass emissions testing due to the improper air-fuel mixture caused by the high input signal.
How to Fix P0108 2015 GMC Sierra
- Diagnostic Scan: Use a diagnostic scanner to retrieve the trouble code and identify the specific sensor causing the issue.
- Sensor Inspection: Inspect the MAP and BARO sensors for any visible damage or signs of malfunction. Test the sensors using a multimeter to verify their functionality.
- Check Wiring: Inspect the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Vacuum Leak Test: Perform a smoke test or use a vacuum gauge to check for any leaks in the intake manifold or vacuum lines. Repair or replace any leaking components.
- ECM Testing: If all other components check out, consider testing the ECM for any faults or software updates that may be required.
Cost to Fix P0108 2015 GMC Sierra
The cost of repairing a P0108 code on a 2015 GMC Sierra can vary depending on the specific cause of the issue. On average, the replacement of a MAP sensor or BARO sensor can range from $50 to $200 for the part alone. Labor costs at an auto repair shop can range from $100 to $300, depending on the shop's hourly rates and the complexity of the repair. Additional costs may include diagnostic fees, wiring repairs, or ECM testing if required. It is advisable to consult with a trusted mechanic or dealership for a more accurate estimate based on your vehicle's specific needs.
Need more information about the P0108 2015 GMC Sierra code?
Need more information on how to fix the P0108 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0108 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0108 2015 GMC Sierra Code
No Frequently Asked Questions about P0108 2015 GMC Sierra Code found.
Discuss the causes and fixes for P0108 2015 GMC Sierra OBDII Code
Code P0108 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.