P0108 2014 GMC Sierra Code - Manifold Absolute Pressure/Barometric Pressure Circuit High Input
Quick Answer
The P0108 diagnostic trouble code (DTC) for a 2014 GMC Sierra refers to an issue with the Manifold Absolute Pressure (MAP) sensor circuit, specifically indicating a high input signal. Common causes include Faulty MAP sensor, Damaged wiring or connectors in the MAP sensor circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0108 2014 GMC Sierra indicates Manifold Absolute Pressure/Barometric Pressure Circuit High Input.
- Common causes
- Common causes include Faulty MAP sensor, Damaged wiring or connectors in the MAP sensor circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0108 2014 GMC Sierra Description
The P0108 diagnostic trouble code (DTC) for a 2014 GMC Sierra refers to an issue with the Manifold Absolute Pressure (MAP) sensor circuit, specifically indicating a high input signal. The MAP sensor is a crucial component of the engine management system, responsible for measuring the pressure inside the intake manifold. This information is utilized by the engine control module (ECM) to determine the correct air-fuel mixture for optimal engine performance.
Common Causes of P0108 2014 GMC Sierra
- Faulty MAP sensor
- Damaged wiring or connectors in the MAP sensor circuit
- ECM malfunction
- Vacuum leaks in the intake manifold
- Incorrectly installed or incompatible aftermarket performance parts
Symptoms of P0108 2014 GMC Sierra
- Decreased fuel efficiency
- Engine hesitation or surging
- Rough idling or stalling
- Check Engine Light illuminated
- Reduced engine power
How to Fix P0108 2014 GMC Sierra
- Begin by conducting a visual inspection of the MAP sensor, wiring, and connectors to check for any visible damage or loose connections.
- Use a multimeter to test the MAP sensor's voltage output to verify if it is within the manufacturer's specified range.
- If the MAP sensor is faulty, replace it with a new OEM or high-quality aftermarket sensor.
- Inspect the wiring harness for any signs of wear or damage, repairing or replacing any affected sections as necessary.
- Clear the DTC with a scan tool and perform a test drive to ensure that the issue has been resolved.
Cost to Fix P0108 2014 GMC Sierra
The typical repair costs for addressing a P0108 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. Replacement MAP sensors for this vehicle can range from $50 to $150, while labor costs can add another $50 to $150. Overall, the total repair cost could fall within the $100 to $300 range. However, it's important to note that diagnosis time and labor rates at auto repair shops can fluctuate based on factors such as location, vehicle make and model, and engine type. It's advisable to consult with local shops to obtain a more accurate estimate for this repair.
Need more information about the P0108 2014 GMC Sierra code?
Need more information on how to fix the P0108 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0108 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0108 2014 GMC Sierra Code
What does the OBDII code P0108 mean for a 2014 GMC Sierra?
P0108 indicates that the Manifold Absolute Pressure (MAP) sensor is sending a signal voltage to the engine control module (ECM) that is higher than expected, suggesting an issue with the MAP sensor circuit.
What are the common symptoms of code P0108 on a 2014 GMC Sierra?
Symptoms may include poor engine performance, rough idle, difficulty starting, reduced fuel efficiency, black exhaust smoke, and the check engine light turning on.
What can cause the P0108 code to appear on a 2014 GMC Sierra?
Common causes include a faulty MAP sensor, damaged wiring or connectors in the MAP sensor circuit, a vacuum leak, or a malfunctioning ECM.
Can a dirty or clogged air filter trigger the P0108 code?
While less common, a dirty or clogged air filter can affect airflow and contribute to issues that may trigger the P0108 code.
How can you diagnose the P0108 code on a 2014 GMC Sierra?
Start by inspecting the MAP sensor and its wiring for damage, check for vacuum leaks, use a multimeter to test the MAP sensor voltage, and scan live data with an OBDII tool to monitor sensor readings.
Is it safe to drive a 2014 GMC Sierra with the P0108 code?
Driving with this code may be unsafe, as it can lead to engine performance issues and increased emissions. It’s best to address the problem promptly.
How do you fix the P0108 code on a 2014 GMC Sierra?
Repairs may involve cleaning or replacing the MAP sensor, repairing damaged wiring or connectors, fixing vacuum leaks, or replacing the ECM if necessary.
Can a failing throttle position sensor cause the P0108 code?
While not a direct cause, issues with the throttle position sensor can sometimes contribute to airflow or pressure problems that may indirectly trigger the P0108 code.
Does the P0108 code affect the fuel system in a 2014 GMC Sierra?
Yes, it can affect the air-fuel ratio, leading to inefficient combustion, poor fuel economy, and increased emissions.
How much does it cost to repair the P0108 code on a 2014 GMC Sierra?
Repair costs vary depending on the issue but typically range from $100 to $300 for parts and labor, depending on whether the MAP sensor or wiring needs replacement.
Discuss the causes and fixes for P0108 2014 GMC Sierra OBDII Code
Code P0108 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.