P0108 2010 HONDA ACCORD - Manifold Absolute Pressure Sensor Circuit High Voltage
P0108 2010 HONDA ACCORD Possible Causes
- Faulty Manifold Absolute Pressure sensor
- Manifold Absolute Pressure harness is open or shorted
- Manifold Absolute Pressure sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How do I fix code P0108 2010 HONDA ACCORD
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0108 2010 HONDA ACCORD code
Labor: 1.0The cost of diagnosing the P0108 2010 HONDA ACCORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0108 2010 HONDA ACCORD code detected?An excessively high voltage from the sensor is sent to ECM
P0108 2010 HONDA ACCORD Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine rough idle
- Engine hesitation
P0108 2010 HONDA ACCORD MeaningThe Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine's Engine Control Module (ECM). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow.
P0108 2010 HONDA ACCORD More InformationNeed more information on how to fix the P0108 2010 HONDA ACCORD code?
Get Access to Factory Service Manuals