P0108 2009 HONDA ACCORD Code - Manifold Absolute Pressure Sensor Circuit High Voltage
|P0108 2009 HONDA ACCORD code possible causes
- Faulty Manifold Absolute Pressure sensor
- Manifold Absolute Pressure harness is open or shorted
- Manifold Absolute Pressure sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
|How is the P0108 2009 HONDA ACCORD code repair?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0108 2009 HONDA ACCORD code
The cost to diagnose the P0108 2009 HONDA ACCORD code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P0108 2009 HONDA ACCORD code detected?
An excessively high voltage from the sensor is sent to ECM
|What are P0108 2009 HONDA ACCORD code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine rough idle
- Engine hesitation
|What is P0108 2009 HONDA ACCORD code meaning?
The Manifold Absolute Pressure (MAP
) sensor provides instantaneous manifold pressure information to the engine's Engine Control Module (ECM
). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF
) sensor to detect the intake airflow.