Engine-Codes.com
Engine-Codes – Audi – P0107 Audi

P0107 Audi Code - Manifold Absolute Pressure/Barometric Pressure Circuit Low Input

Quick Answer

The P0107 diagnostic trouble code for Audi vehicles indicates a low input signal from the Manifold Absolute Pressure (MAP) sensor or Barometric Pressure sensor. Common causes include Faulty MAP sensor, Damaged wiring or connectors, Vacuum leaks in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0107 Audi indicates Manifold Absolute Pressure/Barometric Pressure Circuit Low Input.
Common causes
Common causes include Faulty MAP sensor, Damaged wiring or connectors, Vacuum leaks in the intake system.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Aug 20, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0107 Audi Description

The P0107 diagnostic trouble code for Audi vehicles indicates a low input signal from the Manifold Absolute Pressure (MAP) sensor or Barometric Pressure sensor. The MAP sensor measures the pressure inside the intake manifold, which helps the engine control module (ECM) determine the correct air-fuel mixture for optimal engine performance. A low input signal can affect the engine's fuel delivery, ignition timing, and overall performance.

OBDII Code P0107 Audi - Manifold Absolute Pressure/Barometric Pressure Circuit Low Input
P0107 Audi Code - Manifold Absolute Pressure/Barometric Pressure Circuit Low Input

Common Causes of P0107 Audi

  1. Faulty MAP sensor
  2. Damaged wiring or connectors
  3. Vacuum leaks in the intake system
  4. ECM software issues
  5. Engine mechanical problems affecting pressure readings

Symptoms of P0107 Audi

  1. Decreased engine performance
  2. Reduced fuel efficiency
  3. Rough idling or stalling
  4. Check Engine Light illuminated
  5. Loss of power under acceleration

How to Fix P0107 Audi

  1. Perform a visual inspection of the MAP sensor, wiring, and connectors for any visible damage.
  2. Test the MAP sensor using a multimeter to check for proper voltage output.
  3. Check for vacuum leaks in the intake system and repair as necessary.
  4. Clear the trouble code and reset the ECM to see if the issue reoccurs.
  5. If the problem persists, consider replacing the MAP sensor or seeking professional diagnostic assistance.

Cost to Fix P0107 Audi

The cost of repairing a P0107 code on an Audi can vary depending on the specific cause of the issue. On average, replacing a MAP sensor can cost between $100 and $300, including parts and labor. However, additional diagnostic time may be needed to pinpoint the exact cause of the low input signal. It's recommended to consult with a trusted mechanic or dealership for a more accurate cost estimate based on your vehicle's make and model.

Need more information about the P0107 Audi code?

Need more information on how to fix the P0107 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0107 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0107 Audi Code

1. What are the common symptoms of OBDII code P0107 (Audi)?

Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.

2. What does the OBDII code P0107 (Audi) indicate?

This code indicates a low input signal from the Manifold Absolute Pressure (MAP) sensor or Barometric Pressure (BARO) sensor circuit.

3. What are the possible causes of OBDII code P0107 (Audi)?

Potential causes include a faulty MAP sensor, BARO sensor, damaged wiring or connectors, intake manifold leaks, or a problem with the engine's vacuum system.

4. How can I diagnose the issue related to OBDII code P0107 (Audi)?

Diagnosis typically involves checking the sensor's wiring and connectors for damage, testing the sensor's output using a multimeter, and inspecting for any vacuum leaks.

5. Can I drive my Audi with OBDII code P0107?

It is not recommended to drive your Audi with this code present, as it can lead to further engine damage or unsafe driving conditions.

6. How do I repair OBDII code P0107 (Audi)?

Repair may involve replacing the faulty MAP sensor or BARO sensor, repairing damaged wiring or connectors, fixing intake manifold leaks, or addressing vacuum system issues.

7. What tools do I need to fix OBDII code P0107 (Audi) myself?

Basic tools such as a multimeter, socket set, and screwdrivers may be required to diagnose and repair the issue.

8. Will resetting the OBDII code P0107 (Audi) make it go away permanently?

Resetting the code may temporarily clear the fault, but if the underlying issue is not addressed, the code is likely to reappear.

9. How much does it cost to repair OBDII code P0107 (Audi) at a mechanic?

The cost of repair can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor.

10. Can a DIY enthusiast without much experience fix OBDII code P0107 (Audi)?

With the right tools, resources, and guidance, a DIY enthusiast can potentially fix this issue, but caution and attention to detail are crucial.

Discuss the causes and fixes for P0107 Audi OBDII Code

Submit a New Comment

Code P0107 Audi comments

No comments found for this page.