P0107 Acura Code - Manifold Absolute Pressure Sensor Circuit Low Voltage
Quick Answer
The P0107 diagnostic trouble code (DTC) for Acura vehicles indicates a problem with the Manifold Absolute Pressure (MAP) sensor circuit, specifically low voltage. Common causes include Faulty MAP sensor, Damaged or corroded wiring/connectors in the MAP sensor circuit, Vacuum leaks in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 Acura indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty MAP sensor, Damaged or corroded wiring/connectors in the MAP sensor circuit, Vacuum leaks in the intake system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0107 Acura Description
The P0107 diagnostic trouble code (DTC) for Acura vehicles indicates a problem with the Manifold Absolute Pressure (MAP) sensor circuit, specifically low voltage. The MAP sensor is a critical component that measures the intake manifold pressure, providing data to the engine control module (ECM) to adjust fuel delivery and ignition timing. When the voltage output from the MAP sensor falls below the expected range, it can lead to improper engine performance, fuel economy, and emissions.
Common Causes of P0107 Acura
- Faulty MAP sensor
- Damaged or corroded wiring/connectors in the MAP sensor circuit
- Vacuum leaks in the intake system
- Issues with the ECM
- Clogged or dirty air filter
Symptoms of P0107 Acura
- Rough idle
- Engine hesitation
- Stalling
- Poor fuel economy
- Loss of power
How to Fix P0107 Acura
- Begin by diagnosing the issue using a scan tool to confirm the presence of the P0107 code.
- Inspect the wiring and connectors in the MAP sensor circuit for any damage or corrosion. Repair or replace as necessary.
- Check for vacuum leaks in the intake system and repair them.
- Test the MAP sensor itself using a multimeter to ensure it is functioning properly. Replace if faulty.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0107 Acura
The typical repair costs for addressing a P0107 code on an Acura vehicle can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor in your area. It's important to note that diagnostic time and labor rates can vary, so it's recommended to obtain quotes from local auto repair shops for a more accurate estimate.
Need more information about the P0107 Acura code?
Need more information on how to fix the P0107 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 Acura Code
1. What are the common symptoms of OBDII code P0107 in an Acura related to the Manifold Absolute Pressure Sensor Circuit Low Voltage?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and possible stalling.
2. What are the potential causes of the OBDII code P0107 in an Acura?
- The code P0107 in an Acura is often caused by a faulty manifold absolute pressure (MAP) sensor, damaged sensor wiring, or a problem with the sensor circuit.
3. How can I diagnose the OBDII code P0107 in my Acura?
- To diagnose code P0107, you can use a diagnostic scanner to read the trouble code, visually inspect the sensor and wiring for damage, and perform voltage tests on the sensor.
4. Can I drive my Acura with the OBDII code P0107 present?
- It is not recommended to drive your Acura with the P0107 code present, as it can lead to poor engine performance and potential stalling, compromising safety and causing further damage.
5. How do I repair the Manifold Absolute Pressure Sensor Circuit Low Voltage issue in my Acura?
- Repairing the P0107 code may involve replacing the MAP sensor, repairing or replacing damaged wiring, or addressing any underlying issues in the sensor circuit.
6. Is it possible to reset the OBDII code P0107 in my Acura without fixing the issue?
- While you can clear the code with a diagnostic scanner, it is essential to address the underlying problem causing the P0107 code to prevent further engine performance issues.
7. Can a dirty air filter cause the OBDII code P0107 in an Acura?
- A dirty air filter is unlikely to cause the P0107 code directly, but it can impact overall engine performance and efficiency, potentially exacerbating the issue.
8. Will cleaning the MAP sensor fix the P0107 code in my Acura?
- Cleaning the MAP sensor may help if the issue is related to dirt or debris affecting its functionality, but if the sensor is faulty, it will likely need to be replaced.
9. What is the role of the Manifold Absolute Pressure (MAP) sensor in an Acura?
- The MAP sensor measures the intake manifold's pressure and provides crucial data to the engine control module for optimal fuel delivery and engine performance.
10. How long does it typically take to repair the OBDII code P0107 related to the Manifold Absolute Pressure Sensor Circuit Low Voltage in an Acura?
- The repair time for the P0107 code can vary based on the specific issue, but it generally takes anywhere from 30 minutes to a few hours, depending on the complexity of the repair needed.
Discuss the causes and fixes for P0107 Acura OBDII Code
Code P0107 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.