Engine-Codes.com
Engine-Codes – Honda – P0107 2017 Honda CR-V

P0107 2017 Honda CR-V Code - Manifold Absolute Pressure Sensor Circuit Low Voltage

Quick Answer

The P0107 diagnostic trouble code (DTC) for a 2017 Honda CR-V indicates a problem with the Manifold Absolute Pressure (MAP) sensor circuit registering low voltage. Common causes include Faulty MAP sensor, Damaged wiring or connectors in the sensor circuit, Vacuum leak in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0107 2017 Honda CR-V indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
Common causes
Common causes include Faulty MAP sensor, Damaged wiring or connectors in the sensor circuit, Vacuum leak in the intake system.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0107 2017 Honda CR-V Description

The P0107 diagnostic trouble code (DTC) for a 2017 Honda CR-V indicates a problem with the Manifold Absolute Pressure (MAP) sensor circuit registering low voltage. The MAP sensor plays a crucial role in the engine management system by measuring the intake manifold pressure, which helps the engine control unit (ECU) determine the correct air-fuel mixture for optimal combustion. When the voltage from the MAP sensor falls below the expected range, it can lead to various performance issues in the vehicle.

OBDII Code P0107 2017 Honda CR-V - Manifold Absolute Pressure Sensor Circuit Low Voltage
P0107 2017 Honda CR-V Code - Manifold Absolute Pressure Sensor Circuit Low Voltage

Common Causes of P0107 2017 Honda CR-V

  1. Faulty MAP sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Vacuum leak in the intake system
  4. ECU malfunction
  5. Incorrect sensor calibration

Symptoms of P0107 2017 Honda CR-V

  1. Reduced engine performance
  2. Poor fuel efficiency
  3. Rough idling or stalling
  4. Hesitation or jerking during acceleration
  5. Engine misfires

How to Fix P0107 2017 Honda CR-V

  1. Begin by conducting a visual inspection of the MAP sensor, wiring, and connectors to check for any visible damage or corrosion.
  2. Use a multimeter to test the voltage output of the MAP sensor to determine if it falls outside the specified range.
  3. Inspect the intake system for any vacuum leaks that could affect the sensor readings.
  4. If necessary, replace the MAP sensor with a new, OEM-quality part and ensure proper calibration.
  5. Clear the DTC codes from the ECU and perform a test drive to verify that the issue has been resolved.

Cost to Fix P0107 2017 Honda CR-V

The typical repair costs for addressing a P0107 code on a 2017 Honda CR-V can vary depending on the specific cause of the issue. In general, replacing a faulty MAP sensor can cost between $100 and $300, including parts and labor. Additional costs may apply if there are wiring or connector issues that need to be addressed. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check local rates for a more accurate estimate.

Need more information about the P0107 2017 Honda CR-V code?

Need more information on how to fix the P0107 2017 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0107 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0107 2017 Honda CR-V Code

1. What are the common symptoms of OBDII code P0107 in a 2017 Honda CR-V?

The common symptoms of code P0107 in a 2017 Honda CR-V include poor engine performance, rough idling, stalling, and a reduction in fuel efficiency.

2. What does the OBDII code P0107 indicate in a 2017 Honda CR-V?

OBDII code P0107 in a 2017 Honda CR-V indicates a low voltage condition in the Manifold Absolute Pressure (MAP) sensor circuit.

3. What are the possible causes of OBDII code P0107 in a 2017 Honda CR-V?

Possible causes of code P0107 in a 2017 Honda CR-V include a faulty MAP sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P0107 in my 2017 Honda CR-V?

To diagnose the cause of code P0107, you can use a diagnostic scanner to check the voltage readings from the MAP sensor, inspect the sensor and its connections for any visible damage, and perform a thorough inspection of the sensor circuit wiring.

5. Can I continue driving my 2017 Honda CR-V with OBDII code P0107?

Continuing to drive your 2017 Honda CR-V with code P0107 may cause further damage to the engine and result in poor performance. It is recommended to address the issue promptly.

6. How can I repair OBDII code P0107 in my 2017 Honda CR-V?

To repair code P0107, you may need to replace the faulty MAP sensor, repair any damaged wiring or connectors in the sensor circuit, or reprogram the engine control module (ECM) if necessary.

7. Is it possible to reset OBDII code P0107 in a 2017 Honda CR-V without fixing the underlying issue?

Resetting the code without fixing the underlying issue will only temporarily clear the error code. It is essential to address the root cause of the problem to prevent the code from reoccurring.

8. How much does it cost to fix OBDII code P0107 in a 2017 Honda CR-V?

The cost of fixing code P0107 in a 2017 Honda CR-V can vary depending on the cause of the issue. Replacing a faulty MAP sensor may cost around $100-$200, while addressing wiring or ECM problems could be more expensive.

9. Can a DIY enthusiast repair OBDII code P0107 in a 2017 Honda CR-V?

A DIY enthusiast with the necessary tools and expertise may be able to repair code P0107 by replacing the MAP sensor or addressing wiring issues. However, more complex ECM-related problems may require professional assistance.

10. How often does OBDII code P0107 occur in a 2017 Honda CR-V?

Code P0107 in a 2017 Honda CR-V can occur due to various reasons, including sensor failures or wiring issues. The frequency of occurrence may vary depending on the vehicle's maintenance and driving conditions.

Discuss the causes and fixes for P0107 2017 Honda CR-V OBDII Code

Submit a New Comment

Code P0107 2017 Honda CR-V comments

No comments found for this page.