P0107 2017 GMC Sierra Code - Manifold Absolute Pressure/Barometric Pressure Circuit Low Input
Quick Answer
The P0107 diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates a problem with the Manifold Absolute Pressure (MAP) sensor or Barometric Pressure (BARO) sensor circuit, specifically a low input signal. Common causes include Faulty MAP or BARO sensor, Damaged wiring or connectors in the sensor circuit, Vacuum leaks in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 2017 GMC Sierra indicates Manifold Absolute Pressure/Barometric Pressure Circuit Low Input.
- Common causes
- Common causes include Faulty MAP or BARO sensor, Damaged wiring or connectors in the sensor circuit, Vacuum leaks in the intake system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0107 2017 GMC Sierra Description
The P0107 diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates a problem with the Manifold Absolute Pressure (MAP) sensor or Barometric Pressure (BARO) sensor circuit, specifically a low input signal. The MAP sensor measures the pressure inside the intake manifold, providing crucial data to the engine control module (ECM) for fuel delivery and ignition timing. The BARO sensor, on the other hand, measures the atmospheric pressure outside the engine, helping the ECM adjust fuel trim and optimize engine performance.
Common Causes of P0107 2017 GMC Sierra
- Faulty MAP or BARO sensor
- Damaged wiring or connectors in the sensor circuit
- Vacuum leaks in the intake system
- ECM malfunction
- Incorrect sensor installation or calibration
Symptoms of P0107 2017 GMC Sierra
- Decreased fuel efficiency
- Rough idling or stalling
- Engine hesitation or surging
- Check Engine Light illuminated
- Reduced engine performance
How to Fix P0107 2017 GMC Sierra
- Begin by conducting a thorough visual inspection of the MAP and BARO sensors, wiring, and connectors for any visible damage or corrosion.
- Use a multimeter to test the sensors' voltage and resistance to determine if they are within the manufacturer's specifications.
- Check for vacuum leaks in the intake system by performing a smoke test or using a vacuum gauge.
- If the sensors are faulty, replace them with OEM or high-quality aftermarket parts, ensuring proper installation and calibration.
- Clear the DTC using a scan tool and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0107 2017 GMC Sierra
The cost of repairing a P0107 code on a 2017 GMC Sierra can vary depending on the specific cause of the issue. Replacement MAP or BARO sensors typically range from $50 to $150 each, while labor costs can range from $100 to $200 depending on the shop's hourly rate and the complexity of the repair. Additional costs may include diagnostic time and any necessary parts or materials. It's recommended to consult with a trusted mechanic or dealership for a more accurate estimate based on your vehicle's specific needs.
Need more information about the P0107 2017 GMC Sierra code?
Need more information on how to fix the P0107 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 2017 GMC Sierra Code
What does the OBDII code P0107 mean for a 2017 GMC Sierra?
The P0107 code indicates that the Engine Control Module (ECM) has detected a low voltage signal from the Manifold Absolute Pressure (MAP) sensor, which is outside the expected range.
What are the common symptoms of P0107 in a 2017 GMC Sierra?
Symptoms may include poor engine performance, rough idling, stalling, reduced fuel efficiency, and the Check Engine Light being illuminated.
What causes the P0107 code to trigger in a 2017 GMC Sierra?
Common causes include a faulty MAP sensor, damaged or corroded wiring, a vacuum leak, or a problem with the ECM.
Can I drive my 2017 GMC Sierra with the P0107 code?
Driving with the P0107 code is not recommended, as it can lead to poor engine performance and potential damage if left unresolved.
How do I diagnose the P0107 code on a 2017 GMC Sierra?
Diagnosis includes checking the MAP sensor for proper operation, inspecting the wiring and connectors for damage, and testing the voltage and ground signals to the sensor.
How can I fix the P0107 code on my 2017 GMC Sierra?
Repairs may involve replacing the MAP sensor, repairing damaged wiring, cleaning corroded connectors, or addressing any vacuum leaks in the intake system.
What tools are needed to troubleshoot the P0107 code?
You’ll need an OBDII scanner, a multimeter for electrical testing, and possibly a vacuum gauge to check for leaks.
How much does it cost to fix the P0107 code on a 2017 GMC Sierra?
Repair costs vary but typically range from $100 to $300, depending on whether the MAP sensor needs replacement or if wiring or vacuum leaks must be addressed.
Can a dirty air filter cause the P0107 code on a 2017 GMC Sierra?
A dirty air filter is unlikely to cause the P0107 code directly but can contribute to poor engine performance, which may exacerbate related issues.
Does the P0107 code require reprogramming the ECM on a 2017 GMC Sierra?
In most cases, reprogramming the ECM is not necessary. However, if the ECM itself is faulty, it may require replacement or reprogramming.
Discuss the causes and fixes for P0107 2017 GMC Sierra OBDII Code
Code P0107 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.