P0102 GMC Code - Mass or Volume Air Flow Circuit Low Input
Quick Answer
The P0102 GMC diagnostic trouble code indicates that there is a low input signal coming from the Mass Air Flow (MAF) sensor circuit. Common causes include Faulty MAF sensor, Damaged MAF sensor wiring harness, Clogged air filter. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0102 GMC indicates Mass or Volume Air Flow Circuit Low Input.
- Common causes
- Common causes include Faulty MAF sensor, Damaged MAF sensor wiring harness, Clogged air filter.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0102 GMC Description
The P0102 GMC diagnostic trouble code indicates that there is a low input signal coming from the Mass Air Flow (MAF) sensor circuit. The MAF sensor is a crucial component of the vehicle's engine management system, as it measures the amount of air entering the engine. This information is essential for the engine control unit (ECU) to calculate the correct air-fuel mixture for combustion. When the MAF sensor detects a lower-than-expected airflow, it can lead to a lean air-fuel mixture, which can cause a variety of performance issues.
Common Causes of P0102 GMC
- Faulty MAF sensor
- Damaged MAF sensor wiring harness
- Clogged air filter
- Vacuum leaks
- Dirty or contaminated MAF sensor
Symptoms of P0102 GMC
- Decreased fuel efficiency
- Engine hesitation or stumbling during acceleration
- Rough idling or stalling
- Check Engine Light illuminated
- Reduced engine power
How to Fix P0102 GMC
- Begin by inspecting the MAF sensor and its wiring harness for any visible damage or contamination. Clean the sensor if necessary.
- Check the air filter for any clogs or debris and replace it if dirty.
- Inspect the intake system for any vacuum leaks and repair as needed.
- Clear the diagnostic trouble codes and reset the ECU.
- Test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P0102 GMC
The cost of repairing a P0102 GMC code can vary depending on the specific cause of the issue. In general, the cost of replacing a MAF sensor can range from $100 to $400, including parts and labor. Additional costs may apply if there are other components that need to be replaced or if further diagnosis is required. It is essential to consult with a qualified mechanic to determine the exact cost of repair for this issue. Labor rates at auto repair shops typically range from $80 to $150 per hour, but these rates can vary based on location and other factors.
Tech Notes for P0102 GMC
Need more information about the P0102 GMC code?
Need more information on how to fix the P0102 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0102 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0102 2014 GMC Sierra — Mass or Volume Air Flow Circuit Low Input
- P0102 2015 GMC Sierra — Mass or Volume Air Flow Circuit Low Input
- P0102 2016 GMC Sierra — Mass or Volume Air Flow Circuit Low Input
- P0102 2017 GMC Sierra — Mass or Volume Air Flow Circuit Low Input
- P0102 2018 GMC Sierra — Mass or Volume Air Flow Circuit Low Input
Frequently Asked Questions about P0102 GMC Code
No Frequently Asked Questions about P0102 GMC Code found.
Discuss the causes and fixes for P0102 GMC OBDII Code
-
You could try cleaning the MAF ground circuit and the engine grounds, but more than likely you may have to replace the MAF sensor
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.