Engine-Codes.com
Engine-Codes – Nissan – P0102 2011 Nissan Versa

P0102 2011 Nissan Versa Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The P0102 diagnostic trouble code (DTC) for a 2011 Nissan Versa indicates a problem with the Mass or Volume Air Flow (MAF/VAF) circuit registering a low input. Common causes include Dirty or contaminated MAF sensor, Faulty MAF sensor, Vacuum leaks in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0102 2011 Nissan Versa indicates Mass or Volume Air Flow Circuit Low Input.
Common causes
Common causes include Dirty or contaminated MAF sensor, Faulty MAF sensor, Vacuum leaks in the intake system.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0102 2011 Nissan Versa Description

The P0102 diagnostic trouble code (DTC) for a 2011 Nissan Versa indicates a problem with the Mass or Volume Air Flow (MAF/VAF) circuit registering a low input. The MAF sensor plays a crucial role in measuring the amount of air entering the engine, which is essential for the proper air-fuel mixture required for combustion. When the MAF sensor detects a low input, it means that the engine control module (ECM) is receiving a signal indicating less air is entering the engine than expected. This can lead to a variety of performance issues and potentially cause long-term damage if not addressed promptly.

OBDII Code P0102 2011 Nissan Versa - Mass or Volume Air Flow Circuit Low Input
P0102 2011 Nissan Versa Code - Mass or Volume Air Flow Circuit Low Input

Common Causes of P0102 2011 Nissan Versa

  1. Dirty or contaminated MAF sensor
  2. Faulty MAF sensor
  3. Vacuum leaks in the intake system
  4. Damaged intake air duct
  5. Electrical connections or wiring issues

Symptoms of P0102 2011 Nissan Versa

  1. Decreased fuel efficiency
  2. Rough idling or stalling
  3. Hesitation or lack of power during acceleration
  4. Engine misfires
  5. Check Engine Light illuminated on the dashboard

How to Fix P0102 2011 Nissan Versa

  1. Inspect and clean the MAF sensor: Start by visually inspecting the MAF sensor for any dirt, debris, or contamination. Clean the sensor using MAF sensor cleaner following the manufacturer's instructions.
  2. Check for vacuum leaks: Inspect the intake system for any vacuum leaks that could affect the MAF sensor readings. Repair or replace any damaged components as needed.
  3. Test the MAF sensor: Use a multimeter to test the MAF sensor's voltage output and compare it to the manufacturer's specifications. Replace the sensor if it is faulty.
  4. Inspect electrical connections: Check the wiring harness and electrical connections related to the MAF sensor for any damage or corrosion. Repair or replace any damaged components.
  5. Clear the DTC and test drive: After completing the repairs, clear the DTC using a scan tool and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0102 2011 Nissan Versa

The cost of repairing a P0102 code on a 2011 Nissan Versa can vary depending on the specific cause of the issue. In general, the cost of replacing a MAF sensor ranges from $100 to $300, including parts and labor. Additional costs may apply if other components need to be repaired or replaced. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate based on the specific diagnosis and repair needed. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and other factors.

What does this mean?

Tech Notes for P0102 2011 Nissan Versa

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

Need more information about the P0102 2011 Nissan Versa code?

Need more information on how to fix the P0102 2011 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2011 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2011 Nissan Versa Code

1. What are the common symptoms of OBDII code P0102 in a 2011 Nissan Versa?

- Common symptoms include poor acceleration, rough idling, stalling, and a decrease in fuel efficiency.

2. What does the OBDII code P0102 indicate in a 2011 Nissan Versa?

- The code P0102 indicates a low input in the mass or volume airflow circuit of the vehicle.

3. What are the possible causes of OBDII code P0102 in a 2011 Nissan Versa?

- Possible causes include a dirty or faulty mass airflow sensor, a vacuum leak, a clogged air filter, or issues with the intake air temperature sensor.

4. How can I diagnose the OBDII code P0102 in my 2011 Nissan Versa?

- Diagnosis involves checking the mass airflow sensor for dirt or damage, inspecting the air filter for clogs, and ensuring there are no vacuum leaks in the intake system.

5. Can driving with OBDII code P0102 in a 2011 Nissan Versa cause further damage?

- Driving with code P0102 can lead to reduced engine performance and fuel efficiency, but it is unlikely to cause immediate severe damage.

6. How can I repair OBDII code P0102 in my 2011 Nissan Versa?

- To repair code P0102, you may need to clean or replace the mass airflow sensor, replace the air filter, fix any vacuum leaks, or replace the intake air temperature sensor if necessary.

7. Is it safe to continue driving my 2011 Nissan Versa with OBDII code P0102?

- It is generally safe to drive with code P0102, but it is recommended to address the issue promptly to prevent further engine performance issues.

8. Will resetting the OBDII code P0102 in my 2011 Nissan Versa make it go away permanently?

- Resetting the code may temporarily make it disappear, but if the underlying issue causing P0102 is not fixed, the code is likely to reappear.

9. Can a DIY enthusiast fix OBDII code P0102 in a 2011 Nissan Versa?

- A DIY enthusiast with some mechanical knowledge can attempt to fix code P0102 by inspecting and cleaning components like the mass airflow sensor and air filter.

10. How much should I expect to pay for professional repairs for OBDII code P0102 in a 2011 Nissan Versa?

- The cost of professional repairs for code P0102 can vary depending on the exact cause, but it may range from $100 to $300 or more, including parts and labor.

Discuss the causes and fixes for P0102 2011 Nissan Versa OBDII Code

Submit a New Comment

Code P0102 2011 Nissan Versa comments

No comments found for this page.