Engine-Codes.com
Engine-Codes – Nissan – P0102 2010 Nissan Versa

P0102 2010 Nissan Versa Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The P0102 diagnostic trouble code (DTC) for a 2010 Nissan Versa indicates a problem with the Mass or Volume Air Flow Circuit, specifically a low input signal. Common causes include Faulty MAF sensor, Dirty or contaminated MAF sensor, Vacuum leak in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0102 2010 Nissan Versa indicates Mass or Volume Air Flow Circuit Low Input.
Common causes
Common causes include Faulty MAF sensor, Dirty or contaminated MAF sensor, Vacuum leak in the intake system.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0102 2010 Nissan Versa Description

The P0102 diagnostic trouble code (DTC) for a 2010 Nissan Versa indicates a problem with the Mass or Volume Air Flow Circuit, specifically a low input signal. The Mass Air Flow (MAF) sensor is a crucial component of the vehicle's engine management system, responsible for measuring the amount of air entering the engine. This information is essential for the engine control unit (ECU) to calculate the correct air-fuel mixture for combustion, ensuring optimal performance and fuel efficiency.

OBDII Code P0102 2010 Nissan Versa - Mass or Volume Air Flow Circuit Low Input
P0102 2010 Nissan Versa Code - Mass or Volume Air Flow Circuit Low Input

Common Causes of P0102 2010 Nissan Versa

  1. Faulty MAF sensor
  2. Dirty or contaminated MAF sensor
  3. Vacuum leak in the intake system
  4. Clogged air filter
  5. Wiring or connector issues related to the MAF sensor

Symptoms of P0102 2010 Nissan Versa

  1. Reduced engine power
  2. Poor fuel economy
  3. Rough idling or stalling
  4. Hesitation or jerking during acceleration
  5. Engine misfires

How to Fix P0102 2010 Nissan Versa

  1. Inspect and clean the MAF sensor: Start by visually inspecting the MAF sensor for any dirt, debris, or contamination. Clean the sensor using MAF sensor cleaner following the manufacturer's instructions.
  2. Check for vacuum leaks: Inspect the intake system for any vacuum leaks that could be affecting the airflow. Replace any damaged hoses or gaskets.
  3. Replace the air filter: If the air filter is dirty or clogged, replace it with a new one to ensure proper airflow into the engine.
  4. Test the MAF sensor: Use a multimeter to test the MAF sensor's output signal and compare it to the manufacturer's specifications. Replace the sensor if it is faulty.
  5. Clear the DTC: After completing the repairs, clear the DTC using an OBD-II scanner to reset the ECU and monitor the system for any recurring issues.

Cost to Fix P0102 2010 Nissan Versa

The typical repair costs for addressing a P0102 code on a 2010 Nissan Versa can vary depending on the specific cause of the issue. In general, replacing a faulty MAF sensor can cost between $100 and $400, including parts and labor. Cleaning the sensor or addressing vacuum leaks may be less expensive, with costs ranging from $50 to $200. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check local rates for a more accurate estimate.

What does this mean?

Tech Notes for P0102 2010 Nissan Versa

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

Need more information about the P0102 2010 Nissan Versa code?

Need more information on how to fix the P0102 2010 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2010 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2010 Nissan Versa Code

1. What are the common symptoms of OBDII code P0102 on a 2010 Nissan Versa?

- Common symptoms include a decrease in engine performance, rough idling, stalling, poor fuel economy, and the illumination of the Check Engine Light.

2. What does the OBDII code P0102 on a 2010 Nissan Versa indicate?

- OBDII code P0102 signifies a low input signal from the Mass Air Flow (MAF) sensor, indicating a potential issue with the MAF sensor or its circuit.

3. What are the possible causes of OBDII code P0102 on a 2010 Nissan Versa?

- The potential causes include a faulty MAF sensor, a dirty or contaminated MAF sensor, a vacuum leak, a clogged air filter, a wiring issue in the MAF sensor circuit, or a failing powertrain control module (PCM).

4. How can I diagnose the OBDII code P0102 on a 2010 Nissan Versa?

- Diagnosing OBDII code P0102 involves inspecting the MAF sensor for dirt or debris, checking for any loose or damaged wiring in the MAF sensor circuit, testing the MAF sensor's electrical connections, and using a scan tool to monitor MAF sensor data.

5. Can I drive my 2010 Nissan Versa with OBDII code P0102?

- It is not recommended to drive your vehicle with OBDII code P0102, as it can lead to further engine damage and poor performance. It is advisable to address the underlying issue promptly.

6. How can I repair OBDII code P0102 on my 2010 Nissan Versa?

- Repair options may include cleaning or replacing the MAF sensor, fixing any wiring issues, checking for vacuum leaks, replacing the air filter, or resetting the fault code after addressing the root cause of the problem.

7. Is it possible to reset OBDII code P0102 on a 2010 Nissan Versa by disconnecting the battery?

- Disconnecting the battery may temporarily clear the code, but it is not a recommended method for resolving the underlying issue causing OBDII code P0102. It is best to diagnose and repair the problem to prevent future occurrences.

8. How much does it typically cost to repair OBDII code P0102 on a 2010 Nissan Versa?

- The cost of repairing OBDII code P0102 can vary depending on the root cause of the issue. Repair costs may range from a simple cleaning of the MAF sensor to a replacement of the sensor or other components, with labor costs also factored in.

9. Can a DIY enthusiast fix OBDII code P0102 on a 2010 Nissan Versa?

- Depending on the individual's skill level and access to the necessary tools, a DIY enthusiast may be able to address OBDII code P0102 by following repair guides, troubleshooting steps, and utilizing diagnostic equipment to identify and resolve the issue.

10. How urgent is it to address OBDII code P0102 on a 2010 Nissan Versa?

- It is advisable to address OBDII code P0102 promptly to prevent further engine damage, poor performance, and potential safety risks. Ignoring the issue can lead to more significant problems down the line.

Discuss the causes and fixes for P0102 2010 Nissan Versa OBDII Code

Submit a New Comment

Code P0102 2010 Nissan Versa comments

No comments found for this page.