P00EA 2018 GMC Sierra Code - Intake Air Temperature Sensor 3 Circuit Low Voltage
Quick Answer
The P00EA diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates an issue with the Intake Air Temperature Sensor 3 Circuit registering low voltage. Common causes include Faulty Intake Air Temperature Sensor, Damaged wiring or connectors in the sensor circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P00EA 2018 GMC Sierra indicates Intake Air Temperature Sensor 3 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor, Damaged wiring or connectors in the sensor circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P00EA 2018 GMC Sierra Description
The P00EA diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates an issue with the Intake Air Temperature Sensor 3 Circuit registering low voltage. The Intake Air Temperature (IAT) sensor is a crucial component of the vehicle's engine management system, responsible for measuring the temperature of the air entering the engine. This information is used by the engine control module (ECM) to adjust fuel delivery and ignition timing for optimal performance and efficiency.
Common Causes of P00EA 2018 GMC Sierra
- Faulty Intake Air Temperature Sensor
- Damaged wiring or connectors in the sensor circuit
- ECM malfunction
- Intake air leaks near the sensor
- Extreme temperature conditions affecting sensor performance
Symptoms of P00EA 2018 GMC Sierra
- Decreased fuel efficiency
- Engine misfires or rough idling
- Loss of power or acceleration
- Check Engine Light illuminated
- Engine stalling or hesitation
How to Fix P00EA 2018 GMC Sierra
- Begin by diagnosing the issue using a scan tool to confirm the P00EA code and pinpoint the exact cause.
- Inspect the Intake Air Temperature Sensor and its wiring for any visible damage or corrosion. Replace the sensor if necessary.
- Check the sensor circuit for continuity and repair any damaged wiring or connectors.
- Clear the DTC and reset the ECM to see if the code reappears after repairs.
- Test drive the vehicle to ensure the issue has been resolved and monitor for any recurring symptoms.
Cost to Fix P00EA 2018 GMC Sierra
The cost of repairing the Intake Air Temperature Sensor 3 Circuit low voltage issue can vary depending on the specific cause of the problem and the labor rates in your area. On average, the cost of replacing the sensor and addressing any wiring issues can range from $100 to $300 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can fluctuate, so it's advisable to obtain quotes from multiple sources to get an accurate estimate.
Need more information about the P00EA 2018 GMC Sierra code?
Need more information on how to fix the P00EA 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P00EA 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P00EA 2018 GMC Sierra Code
1. What does the OBDII code P00EA mean on a 2018 GMC Sierra?
P00EA indicates that the Intake Air Temperature (IAT) Sensor 3 circuit is experiencing low voltage, meaning the sensor is not sending the correct electrical signal to the Engine Control Module (ECM).
2. What are the symptoms of code P00EA on a 2018 GMC Sierra?
Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and the Check Engine Light being illuminated.
3. What causes the P00EA code on a 2018 GMC Sierra?
Possible causes include a faulty IAT Sensor 3, damaged or corroded wiring, a bad ECM connection, or a short or open circuit in the sensor wiring.
4. Can I drive my 2018 GMC Sierra with the P00EA code?
Driving with this code is possible, but it is not recommended as it may result in poor engine performance, reduced fuel economy, and potential damage to other components over time.
5. How do I fix the P00EA code on my 2018 GMC Sierra?
Repairs may include replacing the IAT Sensor 3, repairing damaged wiring or connectors, and clearing the code after verifying the issue is resolved.
6. How do I locate the Intake Air Temperature Sensor 3 on my 2018 GMC Sierra?
The IAT Sensor 3 is typically located in the intake manifold or air intake system, often near the throttle body or the air filter housing.
7. How much does it cost to fix the P00EA code on a 2018 GMC Sierra?
Repair costs vary but typically range from $100 to $300, depending on whether the issue is with the sensor, wiring, or connectors.
8. Can a dirty air filter cause the P00EA code on a 2018 GMC Sierra?
A dirty air filter alone is unlikely to cause this code, but it can contribute to airflow issues that may exacerbate sensor problems.
9. How do I test the IAT Sensor 3 on my 2018 GMC Sierra?
You can test the sensor using a multimeter to check for proper voltage and resistance readings as specified in the vehicle's service manual.
10. Will clearing the P00EA code with a scanner fix the problem?
Clearing the code may turn off the Check Engine Light temporarily, but the issue will likely return if the underlying problem is not addressed.
Discuss the causes and fixes for P00EA 2018 GMC Sierra OBDII Code
Code P00EA 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.