P0098 Mitsubishi Code - Intake Air Temperature Sensor 2 Circuit High Voltage
Quick Answer
The P0098 code for Mitsubishi vehicles indicates a problem with the Intake Air Temperature Sensor 2 Circuit registering high voltage. Common causes include Faulty Intake Air Temperature Sensor, Damaged wiring or connectors in the sensor circuit, Issues with the Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0098 Mitsubishi indicates Intake Air Temperature Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor, Damaged wiring or connectors in the sensor circuit, Issues with the Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0098 Mitsubishi Description
The P0098 code for Mitsubishi vehicles indicates a problem with the Intake Air Temperature Sensor 2 Circuit registering high voltage. The Intake Air Temperature Sensor (IAT) is a crucial component of the engine management system, responsible for measuring the temperature of the air entering the engine. This information is used by the Engine Control Module (ECM) to adjust the air-fuel mixture for optimal combustion and engine performance. When the sensor detects a high voltage signal, it means that the temperature reading is outside of the expected range, which can lead to various issues with the engine's operation.
Common Causes of P0098 Mitsubishi
- Faulty Intake Air Temperature Sensor
- Damaged wiring or connectors in the sensor circuit
- Issues with the Engine Control Module (ECM)
- Problems with the air intake system, such as leaks or blockages
Symptoms of P0098 Mitsubishi
- Decreased fuel efficiency
- Rough idling or engine stalling
- Hesitation or lack of power during acceleration
- Check Engine Light illuminated on the dashboard
How to Fix P0098 Mitsubishi
- Begin by connecting a diagnostic scanner to the vehicle's OBD-II port to retrieve the specific fault code and confirm the issue.
- Inspect the Intake Air Temperature Sensor and its wiring for any visible damage or corrosion. Replace the sensor if necessary.
- Check the wiring harness and connectors for any signs of wear or disconnection. Repair or replace damaged components as needed.
- Clear the fault code from the ECM memory using the diagnostic scanner and perform a test drive to ensure that the issue has been resolved.
- If the problem persists, further diagnosis may be required to identify any underlying issues with the ECM or air intake system.
Cost to Fix P0098 Mitsubishi
The cost of repairing a P0098 code related to the Intake Air Temperature Sensor 2 Circuit High Voltage can vary depending on the specific cause of the issue and the labor rates in your area. In general, replacing the Intake Air Temperature Sensor itself can range from $50 to $150, while addressing wiring or connector issues may add to the total cost. Labor rates at auto repair shops typically range from $80 to $150 per hour, so the total repair cost can be estimated based on the time required to diagnose and fix the problem. It's recommended to consult with a professional mechanic to get an accurate estimate based on your vehicle's make and model.
When is the Code Detected?
Need more information about the P0098 Mitsubishi code?
Need more information on how to fix the P0098 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0098 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0098 Mitsubishi Code
What does the OBDII code P0098 mean for a Mitsubishi?
P0098 indicates a high voltage issue in the Intake Air Temperature (IAT) Sensor 2 circuit, suggesting a problem with the sensor or its wiring.
What are the symptoms of P0098 in a Mitsubishi vehicle?
Common symptoms include poor engine performance, rough idle, reduced fuel efficiency, and the Check Engine Light turning on.
What causes the P0098 code in a Mitsubishi?
Possible causes include a faulty IAT Sensor 2, damaged wiring or connectors, short circuits, or issues with the engine control module (ECM).
Can I drive my Mitsubishi with a P0098 code?
While driving may still be possible, it’s not recommended as the engine may run inefficiently, potentially causing further damage.
How do I diagnose the P0098 code on a Mitsubishi?
Start by inspecting the IAT Sensor 2, its wiring, and connectors for damage. Use a multimeter to check for proper voltage and continuity.
How do I fix the P0098 error code in a Mitsubishi?
Repairs may include replacing the IAT Sensor 2, repairing or replacing damaged wiring, and ensuring proper connector connections.
What tools are needed to fix a P0098 code on a Mitsubishi?
You’ll typically need a multimeter, OBDII scanner, and basic hand tools to diagnose and repair wiring or replace the sensor.
How much does it cost to fix the P0098 code on a Mitsubishi?
Repair costs can range from $50 to $200, depending on whether the issue is with the sensor, wiring, or related components.
Can a dirty air filter cause the P0098 code on a Mitsubishi?
A dirty air filter is unlikely to cause P0098 directly but can impact airflow readings, exacerbating sensor-related issues.
Does clearing the P0098 code solve the problem?
Clearing the code may temporarily turn off the Check Engine Light, but the underlying issue must be addressed to prevent recurrence.
Discuss the causes and fixes for P0098 Mitsubishi OBDII Code
Code P0098 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.