P0098 2018 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit High Voltage Bank 1
Quick Answer
The P0098 diagnostic trouble code (DTC) for a 2018 Ford F150 indicates a problem with the Intake Air Temperature Sensor 2 Circuit High Voltage Bank 1. Common causes include Faulty intake air temperature sensor, Damaged wiring or connectors in the sensor circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0098 2018 Ford F150 indicates Intake Air Temperature Sensor 2 Circuit High Voltage Bank 1.
- Common causes
- Common causes include Faulty intake air temperature sensor, Damaged wiring or connectors in the sensor circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0098 2018 Ford F150 Description
The P0098 diagnostic trouble code (DTC) for a 2018 Ford F150 indicates a problem with the Intake Air Temperature Sensor 2 Circuit High Voltage Bank 1. This sensor is responsible for monitoring the temperature of the air entering the engine. When the sensor detects a high voltage signal, it means that the intake air temperature is higher than expected, which can lead to various performance issues in the vehicle.
Common Causes of P0098 2018 Ford F150
- Faulty intake air temperature sensor
- Damaged wiring or connectors in the sensor circuit
- ECM malfunction
- Intake air leaks
- Engine overheating
Symptoms of P0098 2018 Ford F150
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light illuminated
- Engine running hotter than normal
How to Fix P0098 2018 Ford F150
- Begin by diagnosing the issue using a scan tool to confirm the P0098 code and identify the specific cause.
- Inspect the intake air temperature sensor and its wiring for any signs of damage or wear. Replace the sensor if necessary.
- Check the connections and wiring in the sensor circuit for any loose connections or corrosion. Repair or replace as needed.
- Clear the DTC and reset the ECM to see if the code returns. Test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be required to pinpoint the exact cause, such as testing the ECM or checking for intake air leaks.
Cost to Fix P0098 2018 Ford F150
The typical repair costs for addressing the P0098 code on a 2018 Ford F150 can vary depending on the specific cause of the issue. In general, the cost of replacing the intake air temperature sensor and addressing any wiring or connector issues can range from $100 to $300 for parts and labor. However, it is essential to note that diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more accurate estimate before proceeding with the repair.
Need more information about the P0098 2018 Ford F150 code?
Need more information on how to fix the P0098 2018 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0098 2018 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0098 2018 Ford F150 Code
1. What does the OBDII code P0098 mean on a 2018 Ford F150?
P0098 indicates that the Intake Air Temperature (IAT) Sensor 2 on Bank 1 is detecting a voltage signal higher than the expected range.
2. What are the common symptoms of code P0098 on a 2018 Ford F150?
Symptoms may include poor engine performance, decreased fuel efficiency, rough idling, and possible illumination of the check engine light.
3. What causes the P0098 code to trigger on a 2018 Ford F150?
Common causes include a faulty IAT sensor, damaged or corroded wiring, loose or disconnected connectors, or an issue with the vehicle's PCM.
4. How do I diagnose the P0098 code on my 2018 Ford F150?
Start by inspecting the IAT sensor and its wiring for damage or corrosion. Use a multimeter to test the sensor’s resistance and check the PCM for proper voltage signals.
5. Can I drive my 2018 Ford F150 with the P0098 code?
While the vehicle may still be drivable, it’s not recommended as it can lead to decreased performance and potential damage to engine components.
6. How do I fix the P0098 code on a 2018 Ford F150?
Repairs may involve replacing the IAT sensor, repairing or replacing damaged wiring or connectors, or reprogramming/updating the PCM if necessary.
7. Where is the Intake Air Temperature Sensor 2 located on a 2018 Ford F150?
The IAT Sensor 2 is typically located near the air intake system, downstream of the air filter or integrated into the mass airflow (MAF) sensor.
8. How much does it cost to repair the P0098 code on a 2018 Ford F150?
Repair costs may range from $75 to $200 depending on whether the issue is with the sensor, wiring, or PCM. Labor costs will vary by location.
9. Can a dirty air filter cause the P0098 code on a 2018 Ford F150?
A dirty air filter is unlikely to directly cause the P0098 code but may contribute to performance issues. Always inspect and replace the air filter if needed.
10. Will clearing the P0098 code fix the issue on my 2018 Ford F150?
Clearing the code will reset the check engine light temporarily but won’t fix the underlying issue. Proper diagnosis and repair are necessary to prevent the code from returning.
Discuss the causes and fixes for P0098 2018 Ford F150 OBDII Code
Code P0098 2018 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.