P0098 2016 Honda CR-V Code - Intake Air Temperature Sensor 2 Circuit High Voltage
Quick Answer
The P0098 diagnostic trouble code (DTC) for a 2016 Honda CR-V refers to the Intake Air Temperature Sensor 2 Circuit High Voltage. Common causes include Faulty Intake Air Temperature Sensor 2: The sensor itself may be malfunctioning, providing incorrect temperature readings to the ECM, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause high voltage signals or poor connections, Intake Air Duct Blockage: Blockages in the intake air duct can disrupt airflow and affect the sensor's readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0098 2016 Honda CR-V indicates Intake Air Temperature Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor 2: The sensor itself may be malfunctioning, providing incorrect temperature readings to the ECM, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause high voltage signals or poor connections, Intake Air Duct Blockage: Blockages in the intake air duct can disrupt airflow and affect the sensor's readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0098 2016 Honda CR-V Description
The P0098 diagnostic trouble code (DTC) for a 2016 Honda CR-V refers to the Intake Air Temperature Sensor 2 Circuit High Voltage. This code indicates that the Engine Control Module (ECM) has detected a high voltage signal from the intake air temperature sensor 2, which is located in the intake air duct. The intake air temperature sensor measures the temperature of the air entering the engine, allowing the ECM to adjust the air-fuel mixture for optimal combustion. When the sensor reports a high voltage signal, it means that the temperature reading is higher than expected, potentially leading to incorrect fuel delivery and engine performance issues.
Common Causes of P0098 2016 Honda CR-V
- Faulty Intake Air Temperature Sensor 2: The sensor itself may be malfunctioning, providing incorrect temperature readings to the ECM.
- Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause high voltage signals or poor connections.
- Intake Air Duct Blockage: Blockages in the intake air duct can disrupt airflow and affect the sensor's readings.
- ECM Malfunction: A malfunctioning ECM can misinterpret sensor data and trigger the P0098 code.
- Environmental Factors: Extreme temperatures or exposure to heat sources can affect the sensor's performance and trigger high voltage signals.
Symptoms of P0098 2016 Honda CR-V
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Fuel Efficiency: A faulty intake air temperature sensor 2 can lead to incorrect fuel mixture adjustments, resulting in reduced fuel efficiency.
- Engine Misfires: Incorrect air-fuel mixture can cause engine misfires, leading to rough idling or hesitation during acceleration.
- Engine Stalling: In severe cases, the engine may stall due to incorrect fuel delivery caused by the high voltage signal from the sensor.
- Increased Emissions: The ECM may not be able to properly regulate emissions, leading to increased levels of pollutants in the exhaust.
How to Fix P0098 2016 Honda CR-V
- Diagnose the Issue: Use a scan tool to read the DTC and confirm the presence of the P0098 code. Check the intake air temperature sensor 2 and related wiring for any visible damage.
- Replace the Intake Air Temperature Sensor 2: If the sensor is faulty, replace it with a new one following manufacturer guidelines.
- Check and Repair Wiring: Inspect the wiring harness for any damage or corrosion. Repair or replace any damaged wires as needed.
- Clear the DTC: After completing the repairs, clear the DTC using a scan tool to reset the check engine light.
- Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the check engine light remains off.
Cost to Fix P0098 2016 Honda CR-V
The typical repair costs for addressing the P0098 code on a 2016 Honda CR-V can vary depending on the specific cause of the issue. In general, the cost of a new intake air temperature sensor 2 ranges from $50 to $100, while labor costs for sensor replacement and diagnostic work can range from $100 to $200. Overall, the total repair cost for this issue may fall between $150 and $300, excluding any additional parts or services that may be required. It's important to note that labor rates at auto repair shops can vary based on location and other factors, so it's advisable to obtain a detailed estimate from a trusted mechanic before proceeding with the repairs.
Need more information about the P0098 2016 Honda CR-V code?
Need more information on how to fix the P0098 2016 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0098 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0098 2016 Honda CR-V Code
1. What are the common symptoms of OBDII code P0098 in a 2016 Honda CR-V?
A: Common symptoms of P0098 (Intake Air Temperature Sensor 2 Circuit High Voltage) in a 2016 Honda CR-V may include poor engine performance, decreased fuel efficiency, and possibly an illuminated check engine light.
2. What causes the OBDII code P0098 to appear in a 2016 Honda CR-V?
A: The P0098 code in a 2016 Honda CR-V is typically triggered by a faulty intake air temperature sensor, wiring issues in the sensor circuit, or a problem with the engine control module (ECM).
3. How can I diagnose the P0098 code in my 2016 Honda CR-V?
A: Diagnosing the P0098 code involves using an OBDII scanner to retrieve the code, inspecting the intake air temperature sensor and its wiring for damage or corrosion, and checking for any loose connections.
4. Can I drive my 2016 Honda CR-V with the P0098 code present?
A: It is generally not recommended to drive your 2016 Honda CR-V with the P0098 code active, as it can lead to poor engine performance and potentially cause further damage to the vehicle.
5. How can I reset the P0098 code in my 2016 Honda CR-V?
A: To reset the P0098 code, you can use an OBDII scanner to clear the code after addressing the underlying issue with the intake air temperature sensor or its circuit.
6. Is it possible to repair the P0098 code in a 2016 Honda CR-V myself?
A: While some DIY enthusiasts may attempt to address the P0098 code themselves by replacing the intake air temperature sensor or fixing wiring issues, it is recommended to consult a professional mechanic for accurate diagnosis and repair.
7. What are the potential consequences of ignoring the P0098 code in my 2016 Honda CR-V?
A: Ignoring the P0098 code in your 2016 Honda CR-V can lead to decreased fuel efficiency, engine performance issues, and potential long-term damage to the vehicle's engine components.
8. How much does it typically cost to repair the P0098 code in a 2016 Honda CR-V?
A: The cost of repairing the P0098 code in a 2016 Honda CR-V can vary depending on the underlying cause and the labor rates of the repair shop. It is advisable to obtain quotes from different mechanics for an accurate estimate.
9. Can a faulty intake air temperature sensor cause other problems in a 2016 Honda CR-V?
A: Yes, a faulty intake air temperature sensor can cause other issues such as rough idling, hard starting, and incorrect air-fuel mixture, leading to potential drivability problems in the 2016 Honda CR-V.
10. How long does it typically take to repair the P0098 code in a 2016 Honda CR-V?
A: The repair time for the P0098 code in a 2016 Honda CR-V can vary depending on the exact cause of the issue and the expertise of the mechanic. It may take anywhere from a few hours to a full day for the repair to be completed.
Discuss the causes and fixes for P0098 2016 Honda CR-V OBDII Code
Code P0098 2016 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.