P0095 Code - Intake Air Temperature Sensor 2 Circuit
Quick Answer
The P0095 diagnostic trouble code (DTC) refers to the Intake Air Temperature Sensor 2 Circuit. Common causes include Faulty Intake Air Temperature Sensor: The sensor itself may be faulty and require replacement, Wiring Issues: Problems with the wiring connecting the sensor to the ECM can cause the circuit to malfunction, Poor Electrical Connection: A loose or corroded electrical connection can disrupt the sensor's signal to the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0095 indicates Intake Air Temperature Sensor 2 Circuit.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor: The sensor itself may be faulty and require replacement, Wiring Issues: Problems with the wiring connecting the sensor to the ECM can cause the circuit to malfunction, Poor Electrical Connection: A loose or corroded electrical connection can disrupt the sensor's signal to the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0095 Description
The P0095 diagnostic trouble code (DTC) refers to the Intake Air Temperature Sensor 2 Circuit. This code indicates that there is a problem with the electrical circuit of the intake air temperature sensor, specifically the second sensor in the system. The intake air temperature sensor is responsible for measuring the temperature of the air entering the engine. This information is crucial for the engine control module (ECM) to adjust the air-fuel mixture and ignition timing to optimize engine performance and fuel efficiency.
Common Causes of P0095
- Faulty Intake Air Temperature Sensor: The sensor itself may be faulty and require replacement.
- Wiring Issues: Problems with the wiring connecting the sensor to the ECM can cause the circuit to malfunction.
- Poor Electrical Connection: A loose or corroded electrical connection can disrupt the sensor's signal to the ECM.
- ECM Malfunction: In rare cases, a malfunctioning ECM can also trigger the P0095 code.
Symptoms of P0095
- Check Engine Light: The most common symptom associated with the P0095 code is the illumination of the check engine light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A faulty intake air temperature sensor can lead to incorrect air-fuel mixture adjustments, resulting in decreased fuel efficiency.
- Rough Idling: The engine may experience rough idling or stalling due to incorrect sensor readings affecting the engine's performance.
- Engine Misfires: Incorrect air-fuel mixture can cause engine misfires, leading to a noticeable decrease in engine performance.
- Reduced Power: The vehicle may exhibit reduced power output, especially during acceleration, as a result of the intake air temperature sensor 2 circuit issue.
How to Fix P0095
- Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the intake air temperature sensor 2 circuit.
- Replace Intake Air Temperature Sensor: If the sensor is faulty, replace it with a new one following manufacturer guidelines.
- Check Wiring and Connections: Inspect the wiring for any damage or corrosion, and ensure all connections are secure and free of debris.
- Clear DTC: Clear the DTC from the ECM memory using a scan tool after completing the repair to reset the check engine light.
- Test Drive: Take the vehicle for a test drive to ensure the issue has been resolved and that the engine is operating correctly.
Cost to Fix P0095
The typical repair costs for addressing the P0095 code can vary depending on the specific vehicle make and model, as well as the location and labor rates of the auto repair shop. On average, the cost of replacing the intake air temperature sensor and addressing related wiring issues can range from $100 to $300 for parts and labor. It's important to note that additional diagnostic time and labor costs may apply, and rates can differ based on the complexity of the repair. It's recommended to consult with a qualified mechanic or auto repair shop to obtain an accurate cost estimate for addressing the Intake Air Temperature Sensor 2 Circuit issue.
Need more information about the P0095 code?
Need more information on how to fix the P0095 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0095 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0095 Code
No Frequently Asked Questions about P0095 Code found.
Discuss the causes and fixes for P0095 OBDII Code
Code P0095 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.