Engine-Codes - Volvo - P0075 VOLVO

P0075 VOLVO - Intake Valve Control Solenoid Circuit Bank 1

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What is this?
Table of contents

P0075 VOLVO Possible Causes

  • Faulty Intake Valve Control Solenoid Bank 1
  • Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted
  • Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection

How is the P0075 VOLVO code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

What is the cost to diagnose the P0075 VOLVO code

Labor: 1.0

The cost to diagnose the P0075 VOLVO code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected?

An improper voltage is sent to the Engine Control Module (ECM) through intake valve timing control solenoid valve.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P0075 VOLVO Meaning

Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM).
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.

More Information

Need more information on how to fix the P0075 VOLVO code?
Get Access to Factory Service Manuals

Need more help?

Get the P0075 Volvo code diagnosed by a professional: Find a repair shop in your area