Engine-Codes - Nissan - P0075 2006 Nissan Maxima

P0075 2006 Nissan Maxima Code - Intake Valve Control Solenoid Circuit Bank 1

- Code Popularity: 8,344 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the Code P0075 2006 Nissan Maxima?

  • Faulty Intake Valve Control Solenoid Bank 1
  • Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted
  • Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection

|How to Fix the P0075 2006 Nissan Maxima Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Code P0075 2006 Nissan Maxima Tech Notes

Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code.

|What is the Cost to Diagnose the Code P0075 2006 Nissan Maxima?

Labor: 1.0

The cost to diagnose the P0075 2006 Nissan Maxima code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your car have Safety Recalls? → Check here

|When is the P0075 2006 Nissan Maxima Code Detected?

An improper voltage is sent to the Engine Control Module (ECM) through intake valve timing control solenoid valve.

|What are Code P0075 2006 Nissan Maxima Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What Does the P0075 2006 Nissan Maxima Code Mean?

Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM).
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.

Intake Valve Control Solenoid Circuit Bank 1

|Need more Information on the P0075 2006 Nissan Maxima Code?

Need more information on how to fix the P0075 2006 Nissan Maxima code? Get Access to Factory Service Manuals

|Need Help with the P0075 2006 Nissan Maxima Code?

Get the P0075 2006 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area