P0068 2017 GMC Sierra Code - Throttle Body Air Flow Performance
Quick Answer
The P0068 diagnostic trouble code (DTC) in a 2017 GMC Sierra indicates an issue with the throttle body air flow performance. Common causes include Faulty throttle body, Dirty or clogged air filter, Vacuum leak. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0068 2017 GMC Sierra indicates Throttle Body Air Flow Performance.
- Common causes
- Common causes include Faulty throttle body, Dirty or clogged air filter, Vacuum leak.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0068 2017 GMC Sierra Description
The P0068 diagnostic trouble code (DTC) in a 2017 GMC Sierra indicates an issue with the throttle body air flow performance. The throttle body is a critical component of the engine's air intake system, controlling the amount of air that enters the engine. When this code is triggered, it means that the Engine Control Module (ECM) has detected a discrepancy between the expected air flow rate and the actual air flow rate entering the engine through the throttle body.
Common Causes of P0068 2017 GMC Sierra
- Faulty throttle body
- Dirty or clogged air filter
- Vacuum leak
- Malfunctioning Mass Air Flow (MAF) sensor
- Issues with the fuel system
Symptoms of P0068 2017 GMC Sierra
- Reduced engine power and acceleration
- Rough idling or stalling
- Poor fuel efficiency
- Increased emissions
How to Fix P0068 2017 GMC Sierra
- Inspect and clean or replace the air filter
- Check for and repair any vacuum leaks
- Test and, if necessary, replace the Mass Air Flow (MAF) sensor
- Inspect and clean the throttle body, or replace if necessary
- Check and repair any issues with the fuel system
Cost to Fix P0068 2017 GMC Sierra
The typical repair costs for addressing a P0068 code in a 2017 GMC Sierra can vary depending on the specific cause of the issue. On average, the cost can range from $200 to $500, including parts and labor. However, it's important to note that the actual cost can be higher or lower depending on factors such as the location of the repair shop, the make and model of the vehicle, and the type of engine. Diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. It's recommended to contact local repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P0068 2017 GMC Sierra code?
Need more information on how to fix the P0068 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0068 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0068 2017 GMC Sierra Code
1. What does the OBDII code P0068 mean on a 2017 GMC Sierra?
P0068 indicates a discrepancy between the throttle body airflow and the readings from the Manifold Absolute Pressure (MAP) sensor and Mass Air Flow (MAF) sensor.
2. What are the common symptoms of code P0068 in a 2017 GMC Sierra?
Symptoms include poor engine performance, rough idling, decreased fuel efficiency, hesitation during acceleration, and the Check Engine Light turning on.
3. What causes the P0068 code to appear in a 2017 GMC Sierra?
Common causes include a dirty or faulty throttle body, a malfunctioning MAP or MAF sensor, vacuum leaks, wiring issues, or a problem with the powertrain control module (PCM).
4. Can a dirty throttle body cause code P0068 on my 2017 GMC Sierra?
Yes, a dirty or carbon-clogged throttle body can cause inaccurate airflow readings, triggering the P0068 code.
5. How do I fix the P0068 code on a 2017 GMC Sierra?
Start by cleaning the throttle body, checking for vacuum leaks, and inspecting the MAP and MAF sensors. Replace any faulty components as needed. If the issue persists, the PCM may require reprogramming or replacement.
6. Can I drive my 2017 GMC Sierra with the P0068 code active?
While it may be possible to drive, it’s not advisable as the code can lead to poor performance, reduced fuel efficiency, and potential engine damage if ignored.
7. How can I diagnose the P0068 code on a 2017 GMC Sierra?
Use an OBDII scanner to confirm the code, then inspect the throttle body, MAP and MAF sensors, and their wiring for faults. Check for vacuum leaks and perform a live data analysis to compare sensor readings.
8. Do I need to replace the throttle body to fix code P0068 on my 2017 GMC Sierra?
Not necessarily. First, try cleaning the throttle body and inspecting related components. Replace it only if it’s confirmed to be faulty.
9. Can a faulty MAP or MAF sensor trigger the P0068 code in a 2017 GMC Sierra?
Yes, a malfunctioning MAP or MAF sensor can provide incorrect data to the PCM, leading to airflow discrepancies and triggering the P0068 code.
10. Will clearing the P0068 code with a scanner fix the issue on a 2017 GMC Sierra?
Clearing the code will turn off the Check Engine Light temporarily, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P0068 2017 GMC Sierra OBDII Code
Code P0068 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.