P0068 2014 GMC Sierra Code - Throttle Body Air Flow Performance
Quick Answer
The P0068 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the throttle body air flow performance. Common causes include Dirty or clogged throttle body, Malfunctioning throttle position sensor, Vacuum leak. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0068 2014 GMC Sierra indicates Throttle Body Air Flow Performance.
- Common causes
- Common causes include Dirty or clogged throttle body, Malfunctioning throttle position sensor, Vacuum leak.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0068 2014 GMC Sierra Description
The P0068 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the throttle body air flow performance. The throttle body is an essential component of the engine's air intake system, controlling the amount of air that enters the engine. When this code is triggered, it means that the Engine Control Module (ECM) has detected a discrepancy between the expected air flow rate and the actual air flow rate through the throttle body.
Common Causes of P0068 2014 GMC Sierra
- Dirty or clogged throttle body
- Malfunctioning throttle position sensor
- Vacuum leak
- Faulty mass airflow sensor
- Wiring or connector issues
Symptoms of P0068 2014 GMC Sierra
- Reduced engine power
- Poor acceleration
- Rough idling or stalling
- Check Engine Light illuminated
- Reduced fuel efficiency
How to Fix P0068 2014 GMC Sierra
- Begin by scanning the vehicle's computer system to confirm the P0068 code and identify any other related codes.
- Inspect the throttle body for any dirt or debris and clean it thoroughly using a specialized throttle body cleaner.
- Check the throttle position sensor and mass airflow sensor for proper operation and replace if necessary.
- Inspect the vacuum lines for leaks or damage and repair or replace as needed.
- Clear the DTCs from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0068 2014 GMC Sierra
The cost of repairing a P0068 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of parts such as a throttle body cleaner, throttle position sensor, mass airflow sensor, vacuum lines, and any necessary connectors or wiring can range from $50 to $300. Labor costs at auto repair shops typically range from $80 to $150 per hour, with the total repair cost likely falling between $150 to $500. It's important to note that these estimates are rough averages, and actual costs may vary based on factors such as location, vehicle make and model, and the extent of the repairs needed.
Need more information about the P0068 2014 GMC Sierra code?
Need more information on how to fix the P0068 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0068 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0068 2014 GMC Sierra Code
1. What does the OBDII code P0068 for a 2014 GMC Sierra mean?
The P0068 code indicates a potential issue with the throttle body's air flow performance in a 2014 GMC Sierra.
2. What are some common symptoms of a P0068 code in a GMC Sierra?
Common symptoms include rough idling, reduced engine power, poor acceleration, and the Check Engine Light coming on.
3. What are the possible causes of the P0068 code in a 2014 GMC Sierra?
Potential causes of the P0068 code include a faulty throttle body, a dirty or clogged air filter, vacuum leaks, or issues with the mass airflow sensor.
4. How can I diagnose the P0068 code in my GMC Sierra?
Diagnosing the P0068 code involves checking the throttle body for any signs of damage or malfunction, inspecting the air filter for dirt or clogs, and scanning the mass airflow sensor for issues.
5. Can I drive my GMC Sierra with a P0068 code?
It is not recommended to drive your GMC Sierra with a P0068 code as it can lead to poor engine performance and potential damage if left unresolved.
6. How can I repair a P0068 code in my 2014 GMC Sierra?
Repairing a P0068 code may involve cleaning or replacing the throttle body, replacing the air filter, fixing any vacuum leaks, or replacing the mass airflow sensor.
7. Will resetting the OBDII system clear the P0068 code in my GMC Sierra?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear.
8. How much does it typically cost to repair a P0068 code in a 2014 GMC Sierra?
The cost of repairing a P0068 code can vary depending on the specific cause of the issue, but it may range from a few hundred dollars to over a thousand dollars.
9. Can a DIY enthusiast fix a P0068 code in a GMC Sierra?
Some simple fixes like cleaning the throttle body or replacing the air filter can be done by DIY enthusiasts, but more complex issues may require professional help.
10. How often does the P0068 code occur in a 2014 GMC Sierra?
The occurrence of the P0068 code can vary depending on factors like driving conditions, maintenance history, and the overall health of the vehicle's components.
Discuss the causes and fixes for P0068 2014 GMC Sierra OBDII Code
Code P0068 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.