P0060 Hummer Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The P0060 diagnostic trouble code (DTC) for Hummer vehicles specifically refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance for Bank 2 Sensor 2. Common causes include Faulty HO2S heater circuit, Wiring issues or shorts in the heater circuit, Corrosion or damage to the sensor connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0060 Hummer indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty HO2S heater circuit, Wiring issues or shorts in the heater circuit, Corrosion or damage to the sensor connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0060 Hummer Description
The P0060 diagnostic trouble code (DTC) for Hummer vehicles specifically refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance for Bank 2 Sensor 2. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and sending this information to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. Bank 2 Sensor 2 indicates that this sensor is located on the side of the engine that does not contain the number one cylinder and after the catalytic converter.
Common Causes of P0060 Hummer
- Faulty HO2S heater circuit.
- Wiring issues or shorts in the heater circuit.
- Corrosion or damage to the sensor connectors.
- ECM software or hardware issues.
- Faulty catalytic converter affecting sensor readings.
Symptoms of P0060 Hummer
- Check Engine Light illuminated on the dashboard.
- Decreased fuel efficiency.
- Rough idling or engine misfires.
- Failed emissions test.
- Reduced engine performance.
How to Fix P0060 Hummer
- Begin by diagnosing the specific cause of the P0060 code using a scan tool to pinpoint the issue.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Test the HO2S heater circuit for proper resistance and continuity, replacing the sensor if necessary.
- Clear the DTC and test drive the vehicle to ensure the code does not return.
- If the issue persists, further diagnostics may be required to identify any underlying problems with the ECM or catalytic converter.
Cost to Fix P0060 Hummer
The typical repair costs for addressing a P0060 code on a Hummer can vary depending on the specific cause of the issue. Parts such as a new HO2S sensor can range from $50 to $200, while labor costs can add an additional $100 to $200. Overall, the total repair cost for this issue may fall between $150 and $400. It's important to note that these estimates are general guidelines and actual costs may vary based on the location, vehicle make and model, and labor rates at the auto repair shop. It's recommended to obtain a detailed quote from a trusted mechanic before proceeding with the repair.
Tech Notes for P0060 Hummer
Need more information about the P0060 Hummer code?
Need more information on how to fix the P0060 Hummer code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 Hummer code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 Hummer Code
1. What does the OBDII code P0060 mean for a Hummer?
P0060 indicates a problem with the heater resistance circuit in the oxygen sensor (HO2S), specifically Bank 2 Sensor 2.
2. What are the symptoms of code P0060 in a Hummer?
Symptoms may include an illuminated check engine light, poor fuel efficiency, increased emissions, or difficulty passing a smog test.
3. What causes the P0060 code on a Hummer?
Common causes include a faulty oxygen sensor, damaged sensor wiring, poor electrical connections, or issues with the PCM (Powertrain Control Module).
4. Which sensor does P0060 refer to?
P0060 refers to the downstream oxygen sensor (Sensor 2) on Bank 2, which is the side of the engine opposite Cylinder 1.
5. Can I drive my Hummer with a P0060 code?
While the vehicle may still drive, it’s not recommended to ignore the code as it can lead to increased emissions, poor performance, and potential damage to the catalytic converter.
6. How do I diagnose the P0060 code on a Hummer?
Start by inspecting the wiring and connections for Bank 2 Sensor 2, testing the heater circuit for continuity, and using a scan tool to verify sensor operation.
7. Do I need to replace the oxygen sensor to fix P0060?
Not always. First, check for damaged wiring or poor connections. If those are fine, the sensor itself may need replacement.
8. What tools are needed to fix a P0060 code on a Hummer?
Common tools include an OBDII scanner, multimeter for testing resistance, and basic hand tools to access and replace the oxygen sensor.
9. How much does it cost to fix a P0060 code on a Hummer?
Repair costs can range from $150 to $400, depending on whether the issue is with the sensor, wiring, or PCM.
10. Can a bad PCM cause the P0060 code on a Hummer?
Yes, although it’s rare, a malfunctioning PCM could fail to properly control the oxygen sensor heater circuit, triggering the P0060 code.
Discuss the causes and fixes for P0060 Hummer OBDII Code
Code P0060 Hummer comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.