P0060 2017 Ford F150 Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The P0060 diagnostic trouble code (DTC) for a 2017 Ford F150 specifically refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance in Bank 2, Sensor 2. Common causes include Faulty HO2S Heater: The most common cause of the P0060 code is a malfunctioning heating element within the oxygen sensor, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can also trigger this code, ECM Malfunction: A faulty engine control module may not be able to properly communicate with the oxygen sensor, causing the code to be triggered. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0060 2017 Ford F150 indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty HO2S Heater: The most common cause of the P0060 code is a malfunctioning heating element within the oxygen sensor, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can also trigger this code, ECM Malfunction: A faulty engine control module may not be able to properly communicate with the oxygen sensor, causing the code to be triggered.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0060 2017 Ford F150 Description
The P0060 diagnostic trouble code (DTC) for a 2017 Ford F150 specifically refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance in Bank 2, Sensor 2. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion efficiency. Bank 2 refers to the side of the engine that does not contain cylinder 1, and Sensor 2 indicates that it is the downstream sensor located after the catalytic converter.
Common Causes of P0060 2017 Ford F150
- Faulty HO2S Heater: The most common cause of the P0060 code is a malfunctioning heating element within the oxygen sensor.
- Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can also trigger this code.
- ECM Malfunction: A faulty engine control module may not be able to properly communicate with the oxygen sensor, causing the code to be triggered.
- Exhaust System Leaks: Any leaks in the exhaust system can affect the readings of the oxygen sensor, leading to the P0060 code.
- Sensor Contamination: Contaminants such as oil or coolant can interfere with the sensor's operation, causing the code to be set.
Symptoms of P0060 2017 Ford F150
- Check Engine Light: The most common symptom associated with the P0060 code is the illumination of the check engine light on the dashboard.
- Poor Fuel Efficiency: A faulty HO2S heater can lead to an incorrect air-fuel mixture, resulting in decreased fuel efficiency.
- Rough Idle: The engine may experience rough idling or hesitation during acceleration due to inaccurate oxygen sensor readings.
- Failed Emissions Test: If the P0060 code is not addressed, it may lead to increased emissions, potentially causing the vehicle to fail emissions tests.
- Reduced Engine Performance: The vehicle may experience a loss of power or reduced engine performance as a result of the incorrect air-fuel mixture.
How to Fix P0060 2017 Ford F150
- Diagnostic Scan: Begin by using an OBD-II scanner to retrieve the specific DTC and confirm that it is indeed a P0060 code related to the HO2S Heater in Bank 2, Sensor 2.
- Check Wiring: Inspect the wiring harness connecting the sensor to the ECM for any signs of damage or corrosion. Repair or replace as necessary.
- Replace Oxygen Sensor: If the heating element in the oxygen sensor is faulty, replace the sensor with a new OEM or aftermarket unit.
- Clear Codes: After completing the repair, clear the DTC from the ECM using the OBD-II scanner to reset the check engine light.
- Test Drive: Take the vehicle for a test drive to ensure that the repair has resolved the issue and that the check engine light does not re-illuminate.
Cost to Fix P0060 2017 Ford F150
The cost of repairing a P0060 code on a 2017 Ford F150 can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of replacing an oxygen sensor ranges from $200 to $300, including parts and labor. However, if additional wiring repairs or ECM diagnostics are needed, the cost can increase. It's advisable to get quotes from local auto repair shops to get a more accurate estimate based on your specific circumstances. Remember that labor rates can vary between $80 and $150 per hour, with dealerships and metropolitan areas often charging more.
Need more information about the P0060 2017 Ford F150 code?
Need more information on how to fix the P0060 2017 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2017 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2017 Ford F150 Code
1. What does the OBDII code P0060 mean for a 2017 Ford F150?
P0060 indicates an issue with the heater resistance circuit for the downstream oxygen sensor on Bank 2 (Sensor 2). It typically points to a problem with the sensor's heater or its circuit.
2. What are the common symptoms of code P0060 in a 2017 Ford F150?
Symptoms may include an illuminated check engine light, poor fuel economy, increased emissions, and possibly failed emissions testing.
3. What causes the P0060 code to appear on a 2017 Ford F150?
Common causes include a faulty oxygen sensor, damaged wiring or connectors in the heater circuit, or issues with the vehicle’s powertrain control module (PCM).
4. How can I fix a P0060 code on my 2017 Ford F150?
Start by inspecting and repairing any damaged wiring or connectors. If the problem persists, replacing the Bank 2 Sensor 2 oxygen sensor is often necessary.
5. How do I locate Bank 2 Sensor 2 on a 2017 Ford F150?
Bank 2 refers to the side of the engine opposite the #1 cylinder, and Sensor 2 is the oxygen sensor located downstream, after the catalytic converter.
6. Can I drive my 2017 Ford F150 with a P0060 code?
While the vehicle may still run, driving with this code can lead to reduced fuel efficiency, increased emissions, and potential damage to other engine components over time.
7. How do I test the oxygen sensor heater circuit for P0060?
Use a multimeter to measure the resistance of the heater circuit in the oxygen sensor. Compare the reading to manufacturer specifications to determine if the sensor is faulty.
8. Is replacing the oxygen sensor the only solution for a P0060 code?
No, the issue could also be caused by wiring problems or a PCM malfunction. Proper diagnosis is necessary to identify the root cause.
9. How much does it cost to repair the P0060 code on a 2017 Ford F150?
Repair costs can vary, but replacing the oxygen sensor typically ranges from $150 to $400, depending on labor rates and parts prices.
10. Can a P0060 code cause my 2017 Ford F150 to fail emissions testing?
Yes, since the oxygen sensor affects emissions control, this code can cause your vehicle to fail an emissions test.
Discuss the causes and fixes for P0060 2017 Ford F150 OBDII Code
Code P0060 2017 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.