Engine-Codes.com
Engine-Codes – Chevrolet – P0060 2015 Chevrolet Silverado

P0060 2015 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

The P0060 diagnostic trouble code on a 2015 Chevrolet Silverado indicates an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance on Bank 2 Sensor 2. Common causes include Faulty oxygen sensor heater, Damaged wiring or connectors in the sensor circuit, Blown fuse related to the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0060 2015 Chevrolet Silverado indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes
Common causes include Faulty oxygen sensor heater, Damaged wiring or connectors in the sensor circuit, Blown fuse related to the sensor circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0060 2015 Chevrolet Silverado Description

The P0060 diagnostic trouble code on a 2015 Chevrolet Silverado indicates an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance on Bank 2 Sensor 2. This sensor is responsible for monitoring the oxygen content in the exhaust gases to ensure optimal fuel efficiency and emissions control. The heater element in the sensor is designed to reach operating temperature quickly to provide accurate readings, but if the resistance in the heater circuit is higher or lower than normal, it can trigger this code.

OBDII Code P0060 2015 Chevrolet Silverado - HO2S Heater Resistance Bank 2 Sensor 2
P0060 2015 Chevrolet Silverado Code - HO2S Heater Resistance Bank 2 Sensor 2

Common Causes of P0060 2015 Chevrolet Silverado

  1. Faulty oxygen sensor heater
  2. Damaged wiring or connectors in the sensor circuit
  3. Blown fuse related to the sensor circuit
  4. Malfunctioning ECM

Symptoms of P0060 2015 Chevrolet Silverado

  1. Decreased fuel efficiency
  2. Rough idling or stalling
  3. Hesitation or lack of power during acceleration
  4. Check Engine Light illuminated
  5. Increased emissions

How to Fix P0060 2015 Chevrolet Silverado

  1. Perform a visual inspection of the oxygen sensor and its wiring for any signs of damage or corrosion.
  2. Test the oxygen sensor heater using a multimeter to check for proper resistance.
  3. Check the fuse related to the sensor circuit and replace if necessary.
  4. If the sensor heater is faulty, replace the oxygen sensor with a new, OEM-quality part.
  5. Clear the trouble code from the ECM memory and perform a test drive to ensure the issue has been resolved.

Cost to Fix P0060 2015 Chevrolet Silverado

The typical repair costs for addressing the P0060 code on a 2015 Chevrolet Silverado can range from $150 to $300, including parts and labor. However, actual costs may vary depending on the specific diagnosis time, labor rates at auto repair shops, and the price of the replacement oxygen sensor. It is advisable to consult with a trusted mechanic or dealership for a more accurate estimate based on your location and vehicle details.

What does this mean?

Tech Notes for P0060 2015 Chevrolet Silverado

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

Need more information about the P0060 2015 Chevrolet Silverado code?

Need more information on how to fix the P0060 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2015 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P0060 in a 2015 Chevrolet Silverado?

The common symptoms of code P0060 in a 2015 Chevrolet Silverado include issues with engine performance, reduced fuel efficiency, and the illumination of the Check Engine Light.

2. What does the OBDII code P0060 for a 2015 Chevrolet Silverado mean?

The OBDII code P0060 for a 2015 Chevrolet Silverado refers to a malfunction in the heater circuit of the oxygen sensor located in Bank 2 Sensor 2.

3. What are the possible causes of OBDII code P0060 in a 2015 Chevrolet Silverado?

Possible causes of code P0060 in a 2015 Chevrolet Silverado include a faulty oxygen sensor, damaged wiring or connectors, or a problem with the sensor's heating element.

4. How can I diagnose the OBDII code P0060 in my 2015 Chevrolet Silverado?

To diagnose code P0060 in a 2015 Chevrolet Silverado, you can use an OBDII scanner to retrieve the trouble codes, inspect the wiring and connectors of the affected oxygen sensor, and test the sensor's heating element for resistance.

5. Can I still drive my 2015 Chevrolet Silverado with OBDII code P0060?

It is not recommended to drive your 2015 Chevrolet Silverado with code P0060, as it can lead to reduced performance and fuel efficiency. It is best to address the issue promptly to prevent further damage.

6. How do I repair OBDII code P0060 in my 2015 Chevrolet Silverado?

To repair code P0060 in a 2015 Chevrolet Silverado, you may need to replace the oxygen sensor in Bank 2 Sensor 2, repair any damaged wiring or connectors, or address any issues with the sensor's heating element.

7. Is it possible to reset the OBDII code P0060 in a 2015 Chevrolet Silverado without fixing the issue?

While you can clear the trouble codes using an OBDII scanner, the Check Engine Light will likely reappear if the underlying issue causing code P0060 in your 2015 Chevrolet Silverado is not resolved.

8. How much does it cost to fix OBDII code P0060 in a 2015 Chevrolet Silverado?

The cost to fix code P0060 in a 2015 Chevrolet Silverado can vary depending on the cause of the issue. Replacing an oxygen sensor or repairing wiring typically ranges from $100 to $300, including parts and labor.

9. Can a DIY enthusiast repair OBDII code P0060 in a 2015 Chevrolet Silverado?

If you have experience with automotive repairs and access to the necessary tools, you may be able to repair code P0060 in a 2015 Chevrolet Silverado yourself by following the proper diagnostic and repair procedures.

10. How long does it take to fix OBDII code P0060 in a 2015 Chevrolet Silverado?

The time it takes to fix code P0060 in a 2015 Chevrolet Silverado can vary depending on the extent of the issue and your experience level. Typically, the repair can be completed within a few hours to a half day.

Discuss the causes and fixes for P0060 2015 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P0060 2015 Chevrolet Silverado comments

No comments found for this page.