P0060 2009 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The P0060 diagnostic trouble code (DTC) for a 2009 Ford Fusion specifically refers to an issue with the Heated Oxygen Sensor (HO2S) Heater Resistance for Bank 2 Sensor 2. Common causes include Faulty HO2S Heater Resistance, Wiring or connector issues, Blown fuse related to the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0060 2009 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty HO2S Heater Resistance, Wiring or connector issues, Blown fuse related to the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0060 2009 Ford Fusion Description
The P0060 diagnostic trouble code (DTC) for a 2009 Ford Fusion specifically refers to an issue with the Heated Oxygen Sensor (HO2S) Heater Resistance for Bank 2 Sensor 2. The HO2S is a crucial component of the vehicle's emissions control system, responsible for monitoring the oxygen levels in the exhaust gases to ensure optimal fuel efficiency and reduce harmful emissions. Bank 2 Sensor 2 indicates that the affected sensor is located on the side of the engine that does not contain the number one cylinder and is positioned downstream of the catalytic converter.
Common Causes of P0060 2009 Ford Fusion
- Faulty HO2S Heater Resistance
- Wiring or connector issues
- Blown fuse related to the sensor
- ECM software or hardware problems
- Exhaust leaks near the sensor
Symptoms of P0060 2009 Ford Fusion
- Decreased fuel efficiency
- Rough idling or stalling
- Poor acceleration
- Illuminated check engine light
- Increased emissions output
How to Fix P0060 2009 Ford Fusion
- Begin by diagnosing the specific cause of the issue using a scan tool to retrieve the DTC and inspecting the sensor, wiring, and connectors for any visible damage.
- Test the HO2S Heater Resistance using a multimeter to determine if it is functioning within the manufacturer's specified range.
- Replace the faulty HO2S Heater Resistance if it fails the resistance test, ensuring to install a high-quality OEM or aftermarket sensor.
- Check and repair any damaged wiring or connectors, ensuring proper connections and insulation to prevent future issues.
- Clear the DTC from the ECM's memory using the scan tool and perform a test drive to verify that the repair has resolved the problem.
Cost to Fix P0060 2009 Ford Fusion
The typical repair costs for addressing a P0060 DTC related to the HO2S Heater Resistance for Bank 2 Sensor 2 in a 2009 Ford Fusion can range from $150 to $300, including parts and labor. However, it is essential to note that the specific diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. Auto repair shops commonly charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships, and lower at independent shops. To obtain a more precise estimate, it is advisable to inquire about local rates before proceeding with the repair.
Need more information about the P0060 2009 Ford Fusion code?
Need more information on how to fix the P0060 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2009 Ford Fusion Code
1. What are the common symptoms of OBDII code P0060 on a 2009 Ford Fusion?
- Common symptoms include poor fuel efficiency, rough idling, engine misfires, and the illumination of the Check Engine Light.
2. What does the OBDII code P0060 for a 2009 Ford Fusion indicate?
- The code P0060 indicates an issue with the HO2S (Heated Oxygen Sensor) heater circuit for Bank 2 Sensor 2.
3. What are the potential causes of OBDII code P0060 on a 2009 Ford Fusion?
- Possible causes include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or a problem with the engine control module (ECM).
4. How can I diagnose the HO2S heater resistance issue on Bank 2 Sensor 2 of a 2009 Ford Fusion?
- Use a multimeter to test the resistance of the oxygen sensor's heater circuit and check for any continuity issues or abnormal resistance readings.
5. Can I still drive my 2009 Ford Fusion with OBDII code P0060 present?
- It is not recommended to drive the vehicle with this code as it can lead to poor engine performance and potential damage to the catalytic converter.
6. What is the typical repair for OBDII code P0060 on a 2009 Ford Fusion?
- The usual repair involves replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, and resetting the fault code with an OBDII scanner.
7. Are there any DIY tips for fixing the HO2S heater resistance issue on Bank 2 Sensor 2 of a 2009 Ford Fusion?
- DIY enthusiasts can attempt to replace the oxygen sensor themselves by following detailed instructions provided in the vehicle's repair manual.
8. How much does it cost to repair OBDII code P0060 on a 2009 Ford Fusion at a professional mechanic's shop?
- Repair costs can vary depending on the labor rates and parts prices, but typically, fixing this issue can range from $200 to $500 at a mechanic's shop.
9. Can a dirty or contaminated oxygen sensor cause OBDII code P0060 on a 2009 Ford Fusion?
- While possible, a dirty or contaminated oxygen sensor is less likely to trigger code P0060. The issue is usually related to the sensor's heater circuit.
10. Is resetting the Check Engine Light after repairing OBDII code P0060 on a 2009 Ford Fusion necessary?
- Yes, it is recommended to reset the Check Engine Light using an OBDII scanner after fixing the issue to ensure that the repair was successful and to monitor for any new problems.
Discuss the causes and fixes for P0060 2009 Ford Fusion OBDII Code
Code P0060 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.