Engine-CodesHummer – P0059 Hummer

P0059 Hummer Code - HO2S Heater Resistance Bank 2 Sensor 1

Quick Answer

The P0059 diagnostic trouble code (DTC) for Hummer vehicles specifically refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance in Bank 2 Sensor 1. Common causes include Faulty Oxygen Sensor: The most common cause of the P0059 code is a malfunctioning HO2S heater in Bank 2 Sensor 1, Wiring Issues: Damaged or corroded wiring in the sensor circuit can lead to high resistance and trigger the code, Heater Circuit Malfunction: A problem with the heater circuit itself, such as a blown fuse or relay, can also cause the issue. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0059 Hummer indicates HO2S Heater Resistance Bank 2 Sensor 1.
Common causes
Common causes include Faulty Oxygen Sensor: The most common cause of the P0059 code is a malfunctioning HO2S heater in Bank 2 Sensor 1, Wiring Issues: Damaged or corroded wiring in the sensor circuit can lead to high resistance and trigger the code, Heater Circuit Malfunction: A problem with the heater circuit itself, such as a blown fuse or relay, can also cause the issue.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0059 Hummer Description

The P0059 diagnostic trouble code (DTC) for Hummer vehicles specifically refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance in Bank 2 Sensor 1. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. The heater element in the sensor helps it reach operating temperature quickly, allowing it to function effectively.

OBDII Code P0059 Hummer - HO2S Heater Resistance Bank 2 Sensor 1
P0059 Hummer Code - HO2S Heater Resistance Bank 2 Sensor 1

Common Causes of P0059 Hummer

  1. Faulty Oxygen Sensor: The most common cause of the P0059 code is a malfunctioning HO2S heater in Bank 2 Sensor 1.
  2. Wiring Issues: Damaged or corroded wiring in the sensor circuit can lead to high resistance and trigger the code.
  3. Heater Circuit Malfunction: A problem with the heater circuit itself, such as a blown fuse or relay, can also cause the issue.
  4. ECM Malfunction: In rare cases, a fault in the engine control module (ECM) can incorrectly trigger the P0059 code.

Symptoms of P0059 Hummer

  1. Check Engine Light: The most common symptom associated with the P0059 code is the illumination of the check engine light on the vehicle's dashboard.
  2. Decreased Fuel Efficiency: A faulty HO2S heater can lead to incorrect air-fuel mixture adjustments, resulting in decreased fuel efficiency.
  3. Rough Idle: The engine may experience rough idling or hesitation during acceleration due to inaccurate oxygen sensor readings.
  4. Failed Emissions Test: If the issue is not resolved, the vehicle may fail emissions tests due to increased emissions output.

How to Fix P0059 Hummer

  1. Diagnose the Issue: Use a scan tool to retrieve the specific DTC and verify the problem with the HO2S heater in Bank 2 Sensor 1.
  2. Inspect Wiring: Check the wiring harness for any damage, corrosion, or loose connections that may be causing the high resistance.
  3. Test Heater Circuit: Verify the functionality of the heater circuit by checking the fuse, relay, and wiring connections.
  4. Replace Oxygen Sensor: If the sensor's heater is faulty, replace the HO2S in Bank 2 Sensor 1 with a new, OEM-quality part.
  5. Clear Codes: After completing the repair, clear the DTC and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0059 Hummer

The typical repair costs for addressing a P0059 code on a Hummer vehicle can range from $150 to $400, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher at dealerships or in metropolitan areas. Independent shops often offer lower labor rates, so it's advisable to check local rates for a more accurate estimate.

Tech Notes for P0059 Hummer

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

Need more information about the P0059 Hummer code?

Need more information on how to fix the P0059 Hummer code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0059 Hummer code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0059 Hummer Code

1. What are the common symptoms of OBDII code P0059 in a Hummer?

- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and the illumination of the Check Engine Light.

2. What does the OBDII code P0059 related to HO2S Heater Resistance Bank 2 Sensor 1 mean in a Hummer?

- This code indicates a malfunction in the heater circuit of the oxygen sensor located in bank 2, sensor 1 of the exhaust system.

3. What are the possible causes of OBDII code P0059 in a Hummer?

- The code P0059 can be triggered by a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or a problem with the engine control module (ECM).

4. How can I diagnose the issue causing OBDII code P0059 in my Hummer?

- Diagnosis typically involves checking the oxygen sensor's resistance, inspecting the wiring for any damage, testing the heater circuit for continuity, and scanning the ECM for related error codes.

5. Is it safe to continue driving my Hummer with OBDII code P0059 present?

- It is generally not recommended to drive with this code present as it can lead to potential engine damage and increased emissions. It's best to address the issue promptly.

6. What are the repair options for resolving OBDII code P0059 in a Hummer?

- Repair options include replacing the faulty oxygen sensor, repairing or replacing damaged wiring, checking and replacing fuses if necessary, and resetting the ECM after repairs.

7. Can I fix the OBDII code P0059 issue in my Hummer myself, or should I seek professional help?

- While some DIY enthusiasts may be able to address this issue, it is recommended to seek professional help, especially if you are not familiar with diagnosing and repairing electrical components in vehicles.

8. How much does it typically cost to fix OBDII code P0059 in a Hummer?

- The cost of fixing this code can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor if a professional mechanic is involved.

9. Will resetting the Check Engine Light make OBDII code P0059 go away in my Hummer?

- Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue causing P0059 is not addressed, the code is likely to reappear after driving a certain distance.

10. How can I prevent OBDII code P0059 from occurring again in my Hummer in the future?

- To prevent the recurrence of P0059, ensure regular maintenance of your vehicle, address any engine performance issues promptly, and follow the manufacturer's recommended service schedule for oxygen sensor inspection and replacement.

Discuss the causes and fixes for P0059 Hummer OBDII Code

Code P0059 Hummer comments

No comments found for this page.