P0059 2010 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 1
Quick Answer
The P0059 diagnostic trouble code (DTC) for a 2010 Ford Fusion specifically refers to the Heater Resistance Bank 2 Sensor 1 of the HO2S (Heated Oxygen Sensor) system. Common causes include Faulty oxygen sensor heater element, Wiring or connector issues in the sensor circuit, ECM software or hardware malfunction. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0059 2010 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty oxygen sensor heater element, Wiring or connector issues in the sensor circuit, ECM software or hardware malfunction.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0059 2010 Ford Fusion Description
The P0059 diagnostic trouble code (DTC) for a 2010 Ford Fusion specifically refers to the Heater Resistance Bank 2 Sensor 1 of the HO2S (Heated Oxygen Sensor) system. This code indicates that there is a malfunction in the heating element circuit of the oxygen sensor located in bank 2, which is typically the side of the engine where the second cylinder is located. The primary function of the HO2S is to measure the oxygen content in the exhaust gases and provide feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. The heater element is crucial for the sensor to reach operating temperature quickly, especially during cold starts, improving accuracy and efficiency.
Common Causes of P0059 2010 Ford Fusion
- Faulty oxygen sensor heater element
- Wiring or connector issues in the sensor circuit
- ECM software or hardware malfunction
- Exhaust system leaks
- Engine coolant temperature sensor malfunction
Symptoms of P0059 2010 Ford Fusion
- Illuminated check engine light
- Decreased fuel efficiency
- Rough idling or engine stalling
- Increased emissions
- Reduced engine performance
How to Fix P0059 2010 Ford Fusion
- Diagnose the specific cause of the issue by using a scan tool to check for the P0059 code and perform a visual inspection of the sensor and wiring.
- Test the oxygen sensor heater element for resistance to determine if it is within the manufacturer's specified range.
- Inspect the wiring and connectors for any damage, corrosion, or loose connections, repairing or replacing as needed.
- Clear the code from the ECM memory and perform a road test to ensure the issue has been resolved.
- If the problem persists, consider replacing the oxygen sensor in bank 2, sensor 1 with a new OEM part.
Cost to Fix P0059 2010 Ford Fusion
The typical repair costs for addressing a P0059 code on a 2010 Ford Fusion can range from $150 to $400, including parts and labor. However, actual costs can vary based on the specific diagnosis time and labor rates at auto repair shops, which can range from $80 to $150 per hour. It is recommended to consult local repair facilities for accurate pricing based on your location and vehicle specifics.
Need more information about the P0059 2010 Ford Fusion code?
Need more information on how to fix the P0059 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0059 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0059 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P0059 on a 2010 Ford Fusion?
The common symptoms of code P0059 include poor fuel economy, rough idle, engine misfires, and an illuminated check engine light.
2. What does the OBDII code P0059 indicate on a 2010 Ford Fusion?
Code P0059 indicates an issue with the HO2S (Heated Oxygen Sensor) heater resistance on Bank 2 Sensor 1 in the exhaust system of the vehicle.
3. What are the possible causes of OBDII code P0059 on a 2010 Ford Fusion?
Possible causes of code P0059 include a faulty HO2S heater, damaged wiring or connectors, a blown fuse, or a problem with the engine control module (ECM).
4. How can I diagnose the OBDII code P0059 on a 2010 Ford Fusion?
Diagnosing code P0059 involves checking the wiring and connectors for damage, testing the HO2S heater resistance, inspecting the fuse, and scanning the ECM for any related faults.
5. Can I continue driving my 2010 Ford Fusion with OBDII code P0059?
It is not recommended to drive your vehicle with an unresolved P0059 code, as it can lead to poor engine performance and potential damage to the catalytic converter over time.
6. How can I repair OBDII code P0059 on a 2010 Ford Fusion?
Repairing code P0059 may involve replacing the HO2S sensor, repairing or replacing damaged wiring or connectors, checking and replacing any blown fuses, and clearing the fault code.
7. Is it possible to reset the OBDII code P0059 on a 2010 Ford Fusion without fixing the issue?
Resetting the code without fixing the underlying issue will only temporarily turn off the check engine light, but the problem will likely resurface if not addressed.
8. Are there any preventive measures to avoid OBDII code P0059 on a 2010 Ford Fusion?
Regular maintenance of the oxygen sensors and monitoring the vehicle's overall health can help prevent issues like code P0059 from occurring.
9. Can a DIY enthusiast tackle the repair of OBDII code P0059 on a 2010 Ford Fusion?
While some aspects of diagnosing and repairing code P0059 can be tackled by a DIY enthusiast, it is recommended to have a professional mechanic perform the repair for accurate diagnosis and proper fix.
10. How long does it typically take to repair OBDII code P0059 on a 2010 Ford Fusion?
The repair time for code P0059 can vary depending on the exact cause of the issue, but it may take anywhere from 1 to 3 hours for a mechanic to diagnose and repair the problem.
Discuss the causes and fixes for P0059 2010 Ford Fusion OBDII Code
Code P0059 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.