P0059 2009 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 1
Quick Answer
The diagnostic trouble code P0059 for a 2009 Ford Fusion indicates an issue with the Heater Resistance of the Oxygen Sensor (HO2S) in Bank 2 Sensor 1. Common causes include Faulty oxygen sensor heater, Wiring issues or damaged connectors, Blown fuse related to the sensor heater circuit. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0059 2009 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty oxygen sensor heater, Wiring issues or damaged connectors, Blown fuse related to the sensor heater circuit.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0059 2009 Ford Fusion Description
The diagnostic trouble code P0059 for a 2009 Ford Fusion indicates an issue with the Heater Resistance of the Oxygen Sensor (HO2S) in Bank 2 Sensor 1. The HO2S is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. The heater element in the sensor helps it reach operating temperature quickly, allowing it to function effectively. If the ECM detects a high resistance in the heater circuit of the sensor, it will trigger this code, indicating a potential problem with the sensor's ability to heat up properly.
Common Causes of P0059 2009 Ford Fusion
- Faulty oxygen sensor heater.
- Wiring issues or damaged connectors.
- Blown fuse related to the sensor heater circuit.
- ECM software malfunction.
- Extreme temperatures affecting sensor performance.
Symptoms of P0059 2009 Ford Fusion
- Check engine light illuminated on the dashboard.
- Decreased fuel efficiency.
- Rough idling or stalling.
- Poor engine performance.
- Failed emissions test.
How to Fix P0059 2009 Ford Fusion
- Begin by confirming the diagnostic trouble code with a professional scan tool.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Test the oxygen sensor heater element for continuity and resistance, replacing if faulty.
- Check and replace any blown fuses related to the sensor heater circuit.
- Clear the trouble code from the ECM memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0059 2009 Ford Fusion
The typical repair costs for addressing a P0059 code on a 2009 Ford Fusion can range from $150 to $400, depending on the specific cause of the issue and the cost of replacement parts. This estimate includes the cost of a new oxygen sensor, any necessary wiring repairs, and labor charges. It's important to note that actual costs may vary based on location, the mechanic's rates, and any additional diagnostic or repair services required. It's recommended to consult with a qualified mechanic for a more accurate cost estimate tailored to your specific situation.
Need more information about the P0059 2009 Ford Fusion code?
Need more information on how to fix the P0059 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0059 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0059 2009 Ford Fusion Code
1. What does OBDII code P0059 for a 2009 Ford Fusion mean?
This code indicates a malfunction in the heater circuit for Bank 2 Sensor 1 oxygen sensor, also known as the HO2S.
2. What are common symptoms of OBDII code P0059 in a 2009 Ford Fusion?
Common symptoms include poor fuel economy, rough idling, stalling, and the illumination of the check engine light.
3. What are the possible causes of OBDII code P0059 in a 2009 Ford Fusion?
Potential causes include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or an issue with the engine control module (ECM).
4. How can I diagnose OBDII code P0059 in my 2009 Ford Fusion?
You can diagnose this code by checking the oxygen sensor heater circuit for continuity, inspecting wiring for damage, and using a scan tool to monitor sensor data.
5. How do I repair OBDII code P0059 in my 2009 Ford Fusion?
To repair this code, you may need to replace the Bank 2 Sensor 1 oxygen sensor, repair any damaged wiring or connectors, and ensure the fuse related to the sensor heater is intact.
6. Can I drive my 2009 Ford Fusion with OBDII code P0059?
It is not recommended to drive your vehicle with this code present, as it can lead to poor engine performance and potential damage over time.
7. How much does it cost to repair OBDII code P0059 in a 2009 Ford Fusion?
The cost of repairs can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
8. Will resetting the check engine light clear OBDII code P0059 in my 2009 Ford Fusion?
Resetting the check engine light may temporarily clear the code, but it will likely return if the underlying issue is not addressed.
9. Can a DIY enthusiast fix OBDII code P0059 in a 2009 Ford Fusion?
A knowledgeable DIY enthusiast with the right tools and skills may be able to diagnose and repair this code, but it is recommended to seek professional help if unsure.
10. Is OBDII code P0059 a common issue in 2009 Ford Fusion vehicles?
While not extremely common, this code can occur in 2009 Ford Fusion models due to sensor wear, wiring issues, or other factors.
Discuss the causes and fixes for P0059 2009 Ford Fusion OBDII Code
Code P0059 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.