P0058 Chrysler Code - O2 Sensor 2/2 Heater Circuit High
Quick Answer
The P0058 Chrysler diagnostic trouble code (DTC) refers to an issue with the O2 sensor 2/2 heater circuit being detected as high. Common causes include Faulty O2 sensor, Short in the O2 sensor heater circuit, Wiring or connector issues. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0058 Chrysler indicates O2 Sensor 2/2 Heater Circuit High.
- Common causes
- Common causes include Faulty O2 sensor, Short in the O2 sensor heater circuit, Wiring or connector issues.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0058 Chrysler Description
The P0058 Chrysler diagnostic trouble code (DTC) refers to an issue with the O2 sensor 2/2 heater circuit being detected as high. This means that the heating element in the second oxygen sensor located after the catalytic converter is drawing more current than normal, indicating a potential problem with the sensor or its circuitry. The O2 sensor plays a crucial role in monitoring the exhaust gases and helping the engine control module (ECM) adjust the air-fuel mixture for optimal combustion. A malfunctioning O2 sensor can lead to poor fuel efficiency, increased emissions, and potential engine performance issues.
Common Causes of P0058 Chrysler
- Faulty O2 sensor
- Short in the O2 sensor heater circuit
- Wiring or connector issues
- ECM software malfunction
- Exhaust system leaks
Symptoms of P0058 Chrysler
- Decreased fuel efficiency
- Engine misfires
- Rough idling
- Check Engine Light illuminated
- Failed emissions test
How to Fix P0058 Chrysler
- Diagnose the O2 sensor and related circuitry for any faults using a scan tool.
- Inspect the wiring and connectors for any visible damage or corrosion.
- Test the O2 sensor heater circuit resistance to determine if it is within specifications.
- Replace the O2 sensor if it is found to be faulty.
- Clear the DTC and perform a road test to verify the repair.
Cost to Fix P0058 Chrysler
The cost of repairing a P0058 Chrysler code can vary depending on the specific issue and the labor rates in your area. On average, replacing an O2 sensor can range from $200 to $400, including parts and labor. Additional costs may be incurred if there are wiring or connector issues that need to be addressed. It's recommended to consult with a qualified mechanic to get an accurate estimate for your particular situation.
Tech Notes for P0058 Chrysler
2005-2006 Chrysler 300 Factory Service Bulletin OBDII Code P0058
When is the Code Detected?
Need more information about the P0058 Chrysler code?
Need more information on how to fix the P0058 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0058 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0058 Chrysler Code
1. What are the common symptoms of OBDII code P0058 in a Chrysler vehicle?
- Common symptoms include poor fuel economy, rough idling, engine misfires, and illuminated Check Engine Light.
2. What does the OBDII code P0058 indicate in a Chrysler vehicle?
- The code P0058 indicates a malfunction in the O2 Sensor 2/2 Heater Circuit High, specifically the downstream oxygen sensor.
3. What are the possible causes of OBDII code P0058 in a Chrysler vehicle?
- The possible causes include a faulty downstream oxygen sensor, damaged wiring or connectors, a blown fuse, or a problem with the engine control module.
4. How can I diagnose the O2 Sensor 2/2 Heater Circuit High issue in my Chrysler vehicle?
- Diagnose the issue by checking the downstream oxygen sensor's resistance, inspecting the wiring and connectors for damage, and testing the fuse related to the sensor heater circuit.
5. How can I repair the OBDII code P0058 in my Chrysler vehicle?
- Repair options include replacing the downstream oxygen sensor, repairing or replacing damaged wiring or connectors, and ensuring the fuse related to the sensor heater circuit is intact.
6. Can driving with the OBDII code P0058 in a Chrysler vehicle cause further damage?
- Continuously driving with the code P0058 may lead to decreased fuel efficiency, potential damage to the catalytic converter, and increased emissions.
7. How urgent is it to address the O2 Sensor 2/2 Heater Circuit High issue in a Chrysler vehicle?
- It is recommended to address the issue promptly to prevent potential damage to the engine and emissions system, as well as to restore optimal fuel efficiency.
8. Can I reset the Check Engine Light after repairing the OBDII code P0058 in my Chrysler vehicle?
- Yes, you can reset the Check Engine Light using an OBDII scanner or by disconnecting the car battery for a few minutes to clear the code.
9. Are there any preventive measures to avoid encountering the O2 Sensor 2/2 Heater Circuit High issue in a Chrysler vehicle?
- Regularly inspecting and maintaining the oxygen sensors, ensuring proper wiring connections, and addressing any engine performance issues promptly can help prevent the occurrence of this code.
10. Is it possible to drive my Chrysler vehicle with the OBDII code P0058 without causing further harm?
- It is generally safe to drive the vehicle for a short distance with the code P0058, but it is advisable to address the issue as soon as possible to prevent any potential damage.
Discuss the causes and fixes for P0058 Chrysler OBDII Code
-
Price depends the model of your vehicle and where you do the repair. Wilde guess $150-$250
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.