Engine-Codes.com
Engine-Codes – Cadillac – P0058 Cadillac

P0058 Cadillac Code - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2

Quick Answer

The P0058 diagnostic trouble code (DTC) for Cadillac vehicles specifically refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Control Circuit having high voltage in Bank 2 Sensor 2. Common causes include Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor with a defective heating element, Wiring Issues: Damaged or corroded wiring, connectors, or terminals in the heater circuit can disrupt the proper voltage flow, ECM Malfunction: A faulty engine control module (ECM) can also be a potential cause of high voltage in the HO2S heater circuit. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0058 Cadillac indicates HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2.
Common causes
Common causes include Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor with a defective heating element, Wiring Issues: Damaged or corroded wiring, connectors, or terminals in the heater circuit can disrupt the proper voltage flow, ECM Malfunction: A faulty engine control module (ECM) can also be a potential cause of high voltage in the HO2S heater circuit.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0058 Cadillac Description

The P0058 diagnostic trouble code (DTC) for Cadillac vehicles specifically refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Control Circuit having high voltage in Bank 2 Sensor 2. This code indicates that there is a problem with the heating element circuit of the oxygen sensor located in the second bank of cylinders and downstream of the catalytic converter. The oxygen sensor plays a crucial role in monitoring the oxygen levels in the exhaust gases, providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion.

OBDII Code P0058 Cadillac - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2
P0058 Cadillac Code - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2

Common Causes of P0058 Cadillac

  1. Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor with a defective heating element.
  2. Wiring Issues: Damaged or corroded wiring, connectors, or terminals in the heater circuit can disrupt the proper voltage flow.
  3. ECM Malfunction: A faulty engine control module (ECM) can also be a potential cause of high voltage in the HO2S heater circuit.
  4. Short Circuit: A short circuit in the oxygen sensor heater circuit can cause the voltage to spike, triggering the P0058 code.
  5. Exhaust Leak: An exhaust leak near the oxygen sensor can affect its performance and lead to heating element issues.

Symptoms of P0058 Cadillac

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Reduced Fuel Efficiency: A malfunctioning oxygen sensor heater can lead to incorrect fuel mixture adjustments, resulting in decreased fuel efficiency.
  3. Rough Idling: The engine may experience rough idling or hesitation when the oxygen sensor is not functioning correctly.
  4. Increased Emissions: High voltage in the HO2S heater circuit can lead to increased emissions, potentially causing the vehicle to fail emissions tests.
  5. Engine Stalling: In severe cases, the engine may stall or have difficulty starting due to the improper feedback from the malfunctioning oxygen sensor.

How to Fix P0058 Cadillac

  1. Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the oxygen sensor, wiring, and connectors to identify the root cause of the problem.
  2. Replace Oxygen Sensor: If the oxygen sensor is found to be faulty, replace Bank 2 Sensor 2 with a new, OEM-quality sensor.
  3. Repair Wiring: Repair or replace any damaged wiring, connectors, or terminals in the heater circuit to ensure proper voltage flow.
  4. Reset ECM: Clear the DTC and reset the ECM to see if the code reappears after the repair. Drive the vehicle to monitor for any recurring issues.
  5. Perform Emissions Test: After the repair, it is advisable to conduct an emissions test to ensure that the vehicle meets the required standards.

Cost to Fix P0058 Cadillac

The typical repair costs for addressing the P0058 Cadillac code can vary depending on the specific cause of the issue and the labor rates in your area. On average, replacing the oxygen sensor and repairing any wiring issues can range from $200 to $500, including parts and labor. However, it is essential to note that diagnostic time and labor rates at auto repair shops can fluctuate, with hourly rates typically falling between $80 and $150. Rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive pricing. For a more accurate estimate, it is recommended to consult local auto repair shops for specific pricing details.

What does this mean?

Tech Notes for P0058 Cadillac

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

Need more information about the P0058 Cadillac code?

Need more information on how to fix the P0058 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0058 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0058 Cadillac Code

1. What are the common symptoms of OBDII code P0058 in a Cadillac?

- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and illuminated Check Engine Light.

2. What does the HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2 mean in relation to OBDII code P0058?

- This code indicates that the oxygen sensor located in Bank 2 Sensor 2 of the Cadillac is experiencing high voltage in its heater control circuit.

3. What are the possible causes of OBDII code P0058 in a Cadillac?

- Possible causes include a faulty oxygen sensor, wiring issues in the heater circuit, a damaged sensor connector, or an ECM (Engine Control Module) problem.

4. How serious is the OBDII code P0058 in a Cadillac?

- While the vehicle may still be operational with this code, it is important to address it promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.

5. Can I continue driving my Cadillac with the OBDII code P0058 present?

- It is generally not recommended to continue driving with this code present, as it can lead to decreased fuel efficiency, engine performance issues, and potential damage to the catalytic converter.

6. How can I diagnose the OBDII code P0058 in my Cadillac?

- Diagnosis involves using an OBDII scanner to retrieve the specific code, inspecting the oxygen sensor and related wiring, and testing the sensor's heater circuit for proper function.

7. What are some tips for repairing OBDII code P0058 in a Cadillac?

- Repair tips include replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, clearing the code, and retesting the vehicle to ensure the issue is resolved.

8. How much does it typically cost to repair OBDII code P0058 in a Cadillac?

- The cost of repair can vary depending on the root cause of the issue, but it may range from $200 to $500 for parts and labor at a professional auto repair shop.

9. How long does it take to repair OBDII code P0058 in a Cadillac?

- The repair time can vary based on the extent of the issue and the availability of parts, but it typically takes around 1 to 2 hours to complete the repair.

10. Can I reset the Check Engine Light after repairing OBDII code P0058 in my Cadillac?

- Yes, the Check Engine Light can be reset using an OBDII scanner after the repair has been completed to clear the code and ensure proper operation.

Discuss the causes and fixes for P0058 Cadillac OBDII Code

Submit a New Comment

Code P0058 Cadillac comments

No comments found for this page.