P0058 Buick Code - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2
Quick Answer
The P0058 Buick code refers to a problem with the HO2S (Heated Oxygen Sensor) Heater Control Circuit High Voltage for Bank 2 Sensor 2. Common causes include Faulty Oxygen Sensor: The most common cause of this code is a faulty Bank 2 Sensor 2 oxygen sensor, Wiring Issues: Corrosion, fraying, or damage to the wiring connected to the oxygen sensor can cause high voltage readings, Heater Control Circuit Malfunction: Problems with the heater control circuit, such as a blown fuse or relay, can trigger this code. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0058 Buick indicates HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Oxygen Sensor: The most common cause of this code is a faulty Bank 2 Sensor 2 oxygen sensor, Wiring Issues: Corrosion, fraying, or damage to the wiring connected to the oxygen sensor can cause high voltage readings, Heater Control Circuit Malfunction: Problems with the heater control circuit, such as a blown fuse or relay, can trigger this code.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0058 Buick Description
The P0058 Buick code refers to a problem with the HO2S (Heated Oxygen Sensor) Heater Control Circuit High Voltage for Bank 2 Sensor 2. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module to adjust the air-fuel mixture for optimal combustion. The heater control circuit is designed to heat up the sensor quickly to operating temperature for accurate readings.
Common Causes of P0058 Buick
- Faulty Oxygen Sensor: The most common cause of this code is a faulty Bank 2 Sensor 2 oxygen sensor.
- Wiring Issues: Corrosion, fraying, or damage to the wiring connected to the oxygen sensor can cause high voltage readings.
- Heater Control Circuit Malfunction: Problems with the heater control circuit, such as a blown fuse or relay, can trigger this code.
- Engine Control Module (ECM) Failure: A malfunctioning ECM may not be sending the correct signals to the oxygen sensor, leading to high voltage readings.
- Exhaust System Leaks: Any leaks in the exhaust system can affect the oxygen sensor's readings and trigger this code.
Symptoms of P0058 Buick
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Decreased Fuel Efficiency: A malfunctioning oxygen sensor can lead to poor fuel combustion, resulting in decreased fuel efficiency.
- Rough Idling: The engine may experience rough idling or hesitation when the oxygen sensor is not functioning properly.
- Failed Emissions Test: A faulty oxygen sensor can cause the vehicle to fail emissions tests due to inaccurate readings.
- Engine Misfires: In severe cases, the engine may experience misfires or hesitation during acceleration.
How to Fix P0058 Buick
- Diagnose the Issue: Use a scan tool to retrieve the fault code and perform a thorough inspection of the oxygen sensor, wiring, and heater control circuit.
- Replace Oxygen Sensor: If the sensor is faulty, replace Bank 2 Sensor 2 with a new one that meets the manufacturer's specifications.
- Check Wiring: Inspect the wiring harness for any damage or corrosion and repair or replace as needed.
- Test Heater Control Circuit: Check the heater control circuit for proper voltage and continuity, and replace any faulty components.
- Clear Codes and Test Drive: Clear the fault codes from the ECM, reset the system, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0058 Buick
The typical repair costs for addressing a P0058 Buick code can range from $200 to $500, depending on the cost of the oxygen sensor, wiring repairs, and labor charges. It's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher at dealerships or in metropolitan areas. Independent shops often offer lower labor rates, so it's advisable to check local rates for a more accurate estimate.
Tech Notes for P0058 Buick
Need more information about the P0058 Buick code?
Need more information on how to fix the P0058 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0058 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0058 Buick Code
What does OBDII code P0058 mean on a Buick?
P0058 indicates a high voltage issue in the heater control circuit for the oxygen sensor (HO2S) located on Bank 2, Sensor 2.
What are the symptoms of code P0058 in a Buick?
Common symptoms include an illuminated Check Engine Light, possible engine performance issues, and failed emissions tests.
What causes code P0058 in a Buick?
Possible causes include a faulty oxygen sensor, damaged wiring or connectors in the heater circuit, a failed PCM, or a short to power in the circuit.
How do I diagnose code P0058 on my Buick?
Start by inspecting the wiring and connectors for damage or corrosion. Then, test the oxygen sensor heater circuit for proper resistance and check for voltage issues.
Can I drive my Buick with a P0058 code?
While the vehicle may still be drivable, it’s not recommended to ignore the code, as it can affect fuel efficiency and emissions.
How much does it cost to fix a P0058 code on a Buick?
Repair costs vary depending on the cause but typically range from $150 to $400, including parts and labor for replacing the oxygen sensor or repairing wiring.
How do I fix code P0058 on a Buick?
Repairs may involve replacing the oxygen sensor, repairing damaged wiring or connectors, or addressing a PCM issue if necessary.
Is code P0058 specific to certain Buick models?
No, P0058 can appear on any Buick model equipped with OBDII diagnostics and a heated oxygen sensor.
Can a bad oxygen sensor cause code P0058 on a Buick?
Yes, a faulty oxygen sensor is one of the most common causes of this code.
Will clearing the code P0058 fix the issue on my Buick?
Clearing the code may turn off the Check Engine Light temporarily, but unless the underlying issue is resolved, the code will likely return.
Discuss the causes and fixes for P0058 Buick OBDII Code
Code P0058 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.