Engine-CodesInfiniti – P0058 2005 Infiniti G35

P0058 2005 Infiniti G35 Code - HO2S22 Heater Control Circuit High

Quick Answer

The P0058 diagnostic trouble code (DTC) in a 2005 Infiniti G35 indicates an issue with the Heater Control Circuit of the HO2S22 (Heated Oxygen Sensor 2 Bank 2). Common causes include Faulty HO2S22: The sensor itself may be malfunctioning, causing the heater control circuit voltage to be too high, Wiring Issues: Damaged or corroded wiring connections to the HO2S22 can disrupt the heater circuit, ECM Malfunction: A problem with the engine control module can also trigger the P0058 code. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0058 2005 Infiniti G35 indicates HO2S22 Heater Control Circuit High.
Common causes
Common causes include Faulty HO2S22: The sensor itself may be malfunctioning, causing the heater control circuit voltage to be too high, Wiring Issues: Damaged or corroded wiring connections to the HO2S22 can disrupt the heater circuit, ECM Malfunction: A problem with the engine control module can also trigger the P0058 code.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0058 2005 Infiniti G35 Description

The P0058 diagnostic trouble code (DTC) in a 2005 Infiniti G35 indicates an issue with the Heater Control Circuit of the HO2S22 (Heated Oxygen Sensor 2 Bank 2). The HO2S22 is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. The heater control circuit is designed to quickly bring the sensor up to operating temperature for accurate readings.

OBDII Code P0058 2005 Infiniti G35 - HO2S22 Heater Control Circuit High
P0058 2005 Infiniti G35 Code - HO2S22 Heater Control Circuit High

Common Causes of P0058 2005 Infiniti G35

  1. Faulty HO2S22: The sensor itself may be malfunctioning, causing the heater control circuit voltage to be too high.
  2. Wiring Issues: Damaged or corroded wiring connections to the HO2S22 can disrupt the heater circuit.
  3. ECM Malfunction: A problem with the engine control module can also trigger the P0058 code.
  4. Blown Fuse: A blown fuse in the heater circuit can prevent the sensor from receiving power.
  5. Exhaust Leak: A leak in the exhaust system near the sensor can affect its operation.

Symptoms of P0058 2005 Infiniti G35

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the Check Engine Light on the dashboard.
  2. Poor Fuel Economy: A faulty HO2S22 heater can lead to incorrect fuel mixture adjustments, resulting in decreased fuel efficiency.
  3. Rough Idle: The engine may experience rough idling or hesitation due to incorrect air-fuel ratios.
  4. Failed Emissions Test: An issue with the HO2S22 can cause increased emissions, leading to a failed emissions test.
  5. Engine Misfires: Incorrect sensor readings can result in engine misfires or poor performance.

How to Fix P0058 2005 Infiniti G35

  1. Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the HO2S22 and its wiring.
  2. Replace HO2S22: If the sensor is faulty, replace it with a new one following manufacturer's guidelines.
  3. Check Wiring: Inspect the wiring harness for any damage or corrosion, repairing or replacing as needed.
  4. Test Heater Circuit: Verify proper voltage and resistance in the heater circuit to ensure it is functioning correctly.
  5. Clear Codes: After repairs are completed, clear the DTC and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0058 2005 Infiniti G35

The cost of repairing a P0058 code in a 2005 Infiniti G35 can vary depending on the specific cause of the issue. Replacement HO2S22 sensors typically range from $50 to $200, while labor costs can range from $100 to $200 depending on the shop's hourly rates. Additional costs may be incurred if wiring repairs or ECM diagnostics are necessary. Overall, the total repair cost could range from $150 to $500. It's recommended to consult with a qualified mechanic for an accurate estimate based on the specific circumstances of your vehicle.

When is the Code Detected?

The P0058 is set when the ECM detects an excessively high voltage through the heated oxygen sensor heater circuit

Need more information about the P0058 2005 Infiniti G35 code?

Need more information on how to fix the P0058 2005 Infiniti G35 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0058 2005 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0058 2005 Infiniti G35 Code

What are the common symptoms of OBDII code P0058 on a 2005 Infiniti G35?

Common symptoms of OBDII code P0058 "HO2S22 Heater Control Circuit High" on a 2005 Infiniti G35 may include poor fuel economy, rough idling, and an illuminated check engine light.

What can cause OBDII code P0058 on a 2005 Infiniti G35?

The most common cause of OBDII code P0058 on a 2005 Infiniti G35 is a malfunctioning HO2S22 (heated oxygen sensor 2, bank 2).

How does the HO2S22 heater control circuit high affect the performance of a 2005 Infiniti G35?

A HO2S22 heater control circuit high issue can lead to inaccurate readings from the oxygen sensor, which can result in poor engine performance and increased emissions.

What is the repair process for OBDII code P0058 on a 2005 Infiniti G35?

To repair OBDII code P0058 on a 2005 Infiniti G35, the faulty HO2S22 sensor may need to be replaced. It's also important to check the wiring and connectors for any damage or corrosion.

Can I drive my 2005 Infiniti G35 with OBDII code P0058?

It is not recommended to drive your 2005 Infiniti G35 with OBDII code P0058 for an extended period as it can lead to poor engine performance and potential damage to the catalytic converter.

How much does it cost to repair OBDII code P0058 on a 2005 Infiniti G35?

The cost of repairing OBDII code P0058 on a 2005 Infiniti G35 can vary depending on the labor rates and parts costs, but it typically ranges from $200 to $400.

How do I reset the check engine light after fixing OBDII code P0058 on a 2005 Infiniti G35?

After fixing OBDII code P0058 on a 2005 Infiniti G35, you can reset the check engine light using an OBDII scanner or by disconnecting the car's battery for a few minutes.

Is OBDII code P0058 a common issue in 2005 Infiniti G35 vehicles?

OBDII code P0058 "HO2S22 Heater Control Circuit High" is not extremely common in 2005 Infiniti G35 vehicles, but it can occur due to sensor or wiring issues. Regular maintenance can help prevent such problems.

Discuss the causes and fixes for P0058 2005 Infiniti G35 OBDII Code

Code P0058 2005 Infiniti G35 comments

No comments found for this page.