Engine-CodesNissan – P0058 2003 Nissan Altima Sedan

P0058 2003 Nissan Altima Sedan Code - HO2S22 Heater Control Circuit High

Quick Answer

The P0058 diagnostic trouble code (DTC) for a 2003 Nissan Altima Sedan refers to the HO2S22 (Heated Oxygen Sensor 2 Bank 2) Heater Control Circuit High. Common causes include Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor, which may need to be replaced, Wiring Issues: Damaged or corroded wiring in the heater control circuit can disrupt the electrical flow and trigger this code, Heater Circuit Short: A short circuit in the heater control circuit can cause the resistance to be too high, leading to this code. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0058 2003 Nissan Altima Sedan indicates HO2S22 Heater Control Circuit High.
Common causes
Common causes include Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor, which may need to be replaced, Wiring Issues: Damaged or corroded wiring in the heater control circuit can disrupt the electrical flow and trigger this code, Heater Circuit Short: A short circuit in the heater control circuit can cause the resistance to be too high, leading to this code.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0058 2003 Nissan Altima Sedan Description

The P0058 diagnostic trouble code (DTC) for a 2003 Nissan Altima Sedan refers to the HO2S22 (Heated Oxygen Sensor 2 Bank 2) Heater Control Circuit High. This code indicates that there is a malfunction in the heater control circuit of the oxygen sensor located in the second bank of cylinders on the vehicle. The oxygen sensor plays a crucial role in monitoring the oxygen levels in the exhaust gases to help the engine control module (ECM) adjust the air-fuel mixture for optimal combustion.

OBDII Code P0058 2003 Nissan Altima Sedan - HO2S22 Heater Control Circuit High
P0058 2003 Nissan Altima Sedan Code - HO2S22 Heater Control Circuit High

Common Causes of P0058 2003 Nissan Altima Sedan

  1. Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor, which may need to be replaced.
  2. Wiring Issues: Damaged or corroded wiring in the heater control circuit can disrupt the electrical flow and trigger this code.
  3. Heater Circuit Short: A short circuit in the heater control circuit can cause the resistance to be too high, leading to this code.
  4. ECM Malfunction: A malfunction in the engine control module (ECM) can also cause issues with the oxygen sensor heater circuit.
  5. Exhaust Leak: An exhaust leak near the oxygen sensor can affect its performance and trigger this code.

Symptoms of P0058 2003 Nissan Altima Sedan

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
  2. Poor Fuel Economy: A malfunctioning oxygen sensor can lead to incorrect air-fuel mixture adjustments, resulting in decreased fuel efficiency.
  3. Rough Idle: The engine may experience rough idling or hesitation during acceleration due to inaccurate oxygen sensor readings.
  4. Failed Emissions Test: If the oxygen sensor is not functioning properly, the vehicle may fail emissions tests due to increased emissions output.
  5. Engine Misfires: Incorrect air-fuel mixture can cause engine misfires, leading to a decrease in performance and drivability.

How to Fix P0058 2003 Nissan Altima Sedan

  1. Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the oxygen sensor and its wiring.
  2. Replace Oxygen Sensor: If the oxygen sensor is faulty, replace it with a new one that meets the manufacturer's specifications.
  3. Repair Wiring: Repair or replace any damaged wiring in the heater control circuit to ensure proper electrical flow.
  4. Check ECM: Inspect the engine control module for any malfunctions and address any issues if necessary.
  5. Clear Codes: After completing the repairs, clear the DTC and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0058 2003 Nissan Altima Sedan

The typical repair costs for addressing a P0058 code on a 2003 Nissan Altima Sedan can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. This estimate includes the cost of a new oxygen sensor, any necessary wiring repairs, and the labor involved in diagnosing and fixing the problem. It's important to note that the actual repair costs can vary based on the location of the repair shop, the vehicle's make and model, and the engine type. Additionally, the diagnosis time and labor rates at auto repair shops can vary, with rates typically ranging between $80 and $150 per hour. It's recommended to obtain quotes from local repair shops for a more accurate estimate.

When is the Code Detected?

The P0058 is set when the ECM detects an excessively high voltage through the heated oxygen sensor heater circuit

Need more information about the P0058 2003 Nissan Altima Sedan code?

Need more information on how to fix the P0058 2003 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0058 2003 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0058 2003 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P0058 on a 2003 Nissan Altima Sedan?

- Common symptoms include decreased fuel efficiency, rough idling, and the illumination of the check engine light.

2. What does the OBDII code P0058 on a 2003 Nissan Altima Sedan indicate?

- The code P0058 indicates a malfunction in the HO2S22 (Heated Oxygen Sensor 2 Bank 2) heater control circuit, specifically a high voltage condition.

3. What are the possible causes of OBDII code P0058 on a 2003 Nissan Altima Sedan?

- Possible causes include a faulty HO2S22 sensor, damaged wiring or connectors in the heater circuit, a blown fuse, or an issue with the engine control module (ECM).

4. How can I diagnose the OBDII code P0058 on my 2003 Nissan Altima Sedan?

- Diagnose the code by using an OBDII scanner to retrieve and interpret the code, then inspect the HO2S22 sensor, wiring, connectors, and related components for any visible damage or issues.

5. Can I continue driving my 2003 Nissan Altima Sedan with the OBDII code P0058 illuminated?

- It is not recommended to drive with the code illuminated, as it can lead to decreased fuel efficiency and potentially cause further damage to the vehicle's emissions system.

6. How can I repair OBDII code P0058 on my 2003 Nissan Altima Sedan?

- Repair options include replacing the faulty HO2S22 sensor, repairing or replacing damaged wiring or connectors, checking and replacing any blown fuses, and resetting the ECM.

7. Are there any DIY tips for resolving OBDII code P0058 on a 2003 Nissan Altima Sedan?

- DIY tips include checking the sensor and wiring for visible damage, ensuring proper connections, and consulting the vehicle's service manual for specific repair procedures.

8. How much does it typically cost to fix OBDII code P0058 on a 2003 Nissan Altima Sedan?

- The cost of fixing the code can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor if you take it to a professional mechanic.

9. Is it necessary to clear the OBDII code P0058 after repairing the issue on a 2003 Nissan Altima Sedan?

- Yes, it is recommended to clear the code using an OBDII scanner after repairing the issue to reset the check engine light and ensure that the repair was successful.

10. How can I prevent OBDII code P0058 from reoccurring on my 2003 Nissan Altima Sedan?

- To prevent the code from reoccurring, ensure regular maintenance of the vehicle, use high-quality sensors and components, and address any issues promptly to avoid further damage.

Discuss the causes and fixes for P0058 2003 Nissan Altima Sedan OBDII Code

Code P0058 2003 Nissan Altima Sedan comments

No comments found for this page.