Engine-Codes.com
Engine-Codes – Chevrolet – P0056 2017 Chevrolet Silverado

P0056 2017 Chevrolet Silverado Code - HO2S Heater Control Circuit Bank 2 Sensor 2

Quick Answer

The P0056 diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Control Circuit for Bank 2 Sensor 2. Common causes include Faulty oxygen sensor heater, Damaged wiring or connectors in the heater circuit, Corrosion or contamination in the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0056 2017 Chevrolet Silverado indicates HO2S Heater Control Circuit Bank 2 Sensor 2.
Common causes
Common causes include Faulty oxygen sensor heater, Damaged wiring or connectors in the heater circuit, Corrosion or contamination in the sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0056 2017 Chevrolet Silverado Description

The P0056 diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Control Circuit for Bank 2 Sensor 2. This sensor is located in the exhaust system and is responsible for monitoring the oxygen levels in the exhaust gases to ensure the proper air-fuel ratio for efficient combustion. The heater control circuit is designed to heat up the sensor quickly to operating temperature, allowing it to start functioning accurately as soon as possible.

OBDII Code P0056 2017 Chevrolet Silverado - HO2S Heater Control Circuit Bank 2 Sensor 2
P0056 2017 Chevrolet Silverado Code - HO2S Heater Control Circuit Bank 2 Sensor 2

Common Causes of P0056 2017 Chevrolet Silverado

  1. Faulty oxygen sensor heater
  2. Damaged wiring or connectors in the heater circuit
  3. Corrosion or contamination in the sensor
  4. Malfunctioning ECM
  5. Exhaust leaks near the sensor

Symptoms of P0056 2017 Chevrolet Silverado

  1. Check Engine Light illuminated on the dashboard
  2. Decreased fuel efficiency
  3. Rough idling or stalling
  4. Engine misfires
  5. Increased emissions

How to Fix P0056 2017 Chevrolet Silverado

  1. Begin by diagnosing the specific cause of the P0056 code using a scan tool to pinpoint the issue accurately.
  2. Inspect the wiring and connectors in the heater circuit for any damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Test the oxygen sensor heater for proper operation and replace if found to be faulty.
  4. Clear the DTC and reset the ECM to see if the code returns. If it does not, perform a road test to ensure the issue has been resolved.
  5. If the code persists, further diagnostic testing may be required to identify any underlying issues with the ECM or exhaust system components.

Cost to Fix P0056 2017 Chevrolet Silverado

The typical repair costs for addressing a P0056 code on a 2017 Chevrolet Silverado can range from $150 to $400, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships and lower at independent shops. For a more precise estimate, it's advisable to check local rates before proceeding with the repair.

What does this mean?

Tech Notes for P0056 2017 Chevrolet Silverado

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

Need more information about the P0056 2017 Chevrolet Silverado code?

Need more information on how to fix the P0056 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0056 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0056 2017 Chevrolet Silverado Code

1. What does OBDII code P0056 on a 2017 Chevrolet Silverado mean?

- OBDII code P0056 refers to a fault in the HO2S heater control circuit for Bank 2 Sensor 2.

2. What are the common symptoms of OBDII code P0056 on a 2017 Chevrolet Silverado?

- Common symptoms include poor fuel economy, rough idling, and an illuminated check engine light.

3. What are the possible causes of OBDII code P0056 on a 2017 Chevrolet Silverado?

- Causes can include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or issues with the engine control module (ECM).

4. How can I diagnose OBDII code P0056 on my 2017 Chevrolet Silverado?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and related components, and testing the wiring for continuity.

5. Can I still drive my 2017 Chevrolet Silverado with OBDII code P0056?

- It is generally not recommended to drive with this code present, as it can lead to decreased fuel efficiency and potential damage to the catalytic converter.

6. How do I repair OBDII code P0056 on a 2017 Chevrolet Silverado?

- Repair may involve replacing the Bank 2 Sensor 2 oxygen sensor, repairing damaged wiring, checking and replacing fuses if needed, or addressing any ECM issues.

7. Are there any DIY tips for fixing OBDII code P0056 on a 2017 Chevrolet Silverado?

- While some may attempt to replace the oxygen sensor themselves, it is recommended to consult a professional mechanic for proper diagnosis and repair.

8. Can a faulty HO2S heater cause other issues in my 2017 Chevrolet Silverado besides triggering code P0056?

- Yes, a malfunctioning HO2S heater can lead to poor engine performance, increased emissions, and potential damage to other engine components.

9. How much does it typically cost to repair OBDII code P0056 on a 2017 Chevrolet Silverado?

- Costs can vary depending on the exact cause of the issue, but expect to pay for parts and labor, with the total ranging from a few hundred to over a thousand dollars.

10. Is resetting the check engine light after fixing OBDII code P0056 on a 2017 Chevrolet Silverado necessary?

- Yes, resetting the check engine light is recommended after repairs to ensure the system recognizes that the issue has been addressed.

Discuss the causes and fixes for P0056 2017 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P0056 2017 Chevrolet Silverado comments

No comments found for this page.