P0038 2006 INFINITI G35 - HO2S12 Heater Control Circuit High
P0038 2006 INFINITI G35 Possible Causes
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 harness is open or shorted
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
Cost of diagnosing the P0038 2006 INFINITI G35 code
Labor: 1.0The cost of diagnosing the P0038 2006 INFINITI G35 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0038 2006 INFINITI G35 code detected?The P0038 is set when the ECM detects an excessively high voltage through the heated oxygen sensor heater circuit
P0038 2006 INFINITI G35 Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0038 2006 INFINITI G35 MeaningOxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
P0038 2006 INFINITI G35 More InformationNeed more information on how to fix the P0038 2006 INFINITI G35 code?
Get Access to Factory Service Manuals