P0037 Scion Code - Oxygen Sensor Heater Control Circuit Low Bank 1 Sensor 2
Quick Answer
The P0037 Scion code refers to a malfunction in the oxygen sensor heater control circuit for Bank 1 Sensor 2. Common causes include Faulty Oxygen Sensor: The oxygen sensor itself may be faulty, causing the heater control circuit to malfunction, Wiring Issues: Damage to the wiring connecting the oxygen sensor to the ECM can disrupt the heater control circuit, Blown Fuse: A blown fuse in the heater control circuit can prevent the oxygen sensor from receiving power. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0037 Scion indicates Oxygen Sensor Heater Control Circuit Low Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Oxygen Sensor: The oxygen sensor itself may be faulty, causing the heater control circuit to malfunction, Wiring Issues: Damage to the wiring connecting the oxygen sensor to the ECM can disrupt the heater control circuit, Blown Fuse: A blown fuse in the heater control circuit can prevent the oxygen sensor from receiving power.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0037 Scion Description
The P0037 Scion code refers to a malfunction in the oxygen sensor heater control circuit for Bank 1 Sensor 2. This sensor is located downstream of the catalytic converter and is responsible for monitoring the oxygen levels in the exhaust gases. The heater control circuit is designed to heat up the oxygen sensor quickly to ensure accurate readings as soon as the vehicle is started.
Common Causes of P0037 Scion
- Faulty Oxygen Sensor: The oxygen sensor itself may be faulty, causing the heater control circuit to malfunction.
- Wiring Issues: Damage to the wiring connecting the oxygen sensor to the ECM can disrupt the heater control circuit.
- Blown Fuse: A blown fuse in the heater control circuit can prevent the oxygen sensor from receiving power.
- ECM Malfunction: A malfunction in the engine control module can also trigger this code by not sending the correct signals to the oxygen sensor.
Symptoms of P0037 Scion
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Poor Fuel Economy: A faulty oxygen sensor heater control circuit can lead to decreased fuel efficiency as the ECM struggles to adjust the air-fuel mixture accurately.
- Rough Idle: The engine may experience rough idling or hesitation when the oxygen sensor is not functioning correctly.
- Failed Emissions Test: If the oxygen sensor is not providing accurate readings, the vehicle may fail emissions tests due to increased emissions.
How to Fix P0037 Scion
- Diagnose the Issue: Use an OBD-II scanner to confirm the P0037 code and perform a visual inspection of the oxygen sensor and its wiring.
- Replace Oxygen Sensor: If the sensor is faulty, replace Bank 1 Sensor 2 with a new one.
- Check Wiring: Inspect the wiring for any damage or corrosion, and repair or replace as needed.
- Test Heater Control Circuit: Test the heater control circuit to ensure it is functioning properly and replace any blown fuses.
- Clear Codes: After completing the repair, clear the codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0037 Scion
The cost of repairing a P0037 Scion code can vary depending on the specific cause of the issue and the labor rates in your area. On average, replacing an oxygen sensor can cost between $200 and $300, including parts and labor. However, if additional wiring repairs or an ECM replacement is required, the cost can increase significantly. It's recommended to consult with a professional mechanic to get an accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can vary, with rates typically ranging from $80 to $150 per hour.
Need more information about the P0037 Scion code?
Need more information on how to fix the P0037 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0037 Scion code diagnosed by a professional: Find a repair shop in your area
Information for Specific Scion Models
- P0037 2005 Scion xB — Oxygen Sensor Heater Control Circuit Low Bank 1 Sensor 2
- P0037 2006 Scion xB — Oxygen Sensor Heater Control Circuit Low Bank 1 Sensor 2
- P0037 2007 Scion xB — Oxygen Sensor Heater Control Circuit Low Bank 1 Sensor 2
Frequently Asked Questions about P0037 Scion Code
1. What does the OBDII code P0037 mean on a Scion?
P0037 indicates a problem with the Oxygen Sensor Heater Control Circuit Low for Bank 1 Sensor 2, meaning the heater circuit in the downstream oxygen sensor is not functioning properly.
2. What are the symptoms of code P0037 in a Scion?
Common symptoms include an illuminated check engine light, reduced fuel efficiency, and possible difficulty passing emissions tests. In most cases, there are no noticeable drivability issues.
3. What causes the P0037 code to appear?
The most common causes include a faulty downstream oxygen sensor (Bank 1 Sensor 2), damaged wiring or connectors, a blown fuse, or a malfunctioning engine control module (ECM).
4. Can I drive my Scion with the P0037 code?
Yes, you can drive the vehicle, but it's not recommended to ignore the issue as it can affect fuel efficiency and emissions performance over time.
5. How do I diagnose the P0037 code on my Scion?
Check the oxygen sensor wiring and connectors for damage or corrosion, test the sensor's heater circuit with a multimeter, and inspect the associated fuse. Replace the sensor if it's faulty.
6. How much does it cost to fix the P0037 code?
Repair costs typically range from $100 to $300, depending on whether you replace the oxygen sensor yourself or have a mechanic do it.
7. Can a loose or damaged connector cause the P0037 code?
Yes, a loose or corroded connector can interrupt the heater circuit and trigger the P0037 code.
8. What tools are needed to fix the P0037 code on a Scion?
Common tools include an OBDII scanner, a multimeter for testing the circuit, and an oxygen sensor socket for replacing the sensor if necessary.
9. Does replacing the oxygen sensor always fix the P0037 code?
Not always. If the issue lies in the wiring, fuse, or ECM, replacing the sensor will not resolve the problem. Proper diagnosis is essential.
10. How can I prevent the P0037 code from recurring?
Regularly inspect and maintain the oxygen sensor wiring and connectors, and address any engine issues that could cause excessive stress on the sensor or heater circuit.
Discuss the causes and fixes for P0037 Scion OBDII Code
Code P0037 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.