Engine-Codes.com
Engine-Codes – GMC – P0037 GMC

P0037 GMC Code - HO2S Heater Control Circuit Low Voltage Bank 1 Sensor 2

Quick Answer

The P0037 diagnostic trouble code (DTC) for GMC vehicles refers to the HO2S (Heated Oxygen Sensor) Heater Control Circuit Low Voltage Bank 1 Sensor 2. Common causes include Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor heating element, Wiring Issues: Damage or corrosion in the wiring connected to the oxygen sensor can disrupt the heater circuit, ECM Malfunction: A problem with the engine control module can prevent it from sending the correct signals to the oxygen sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0037 GMC indicates HO2S Heater Control Circuit Low Voltage Bank 1 Sensor 2.
Common causes
Common causes include Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor heating element, Wiring Issues: Damage or corrosion in the wiring connected to the oxygen sensor can disrupt the heater circuit, ECM Malfunction: A problem with the engine control module can prevent it from sending the correct signals to the oxygen sensor.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0037 GMC Description

The P0037 diagnostic trouble code (DTC) for GMC vehicles refers to the HO2S (Heated Oxygen Sensor) Heater Control Circuit Low Voltage Bank 1 Sensor 2. This code indicates that there is a problem with the heating element circuit of the oxygen sensor located in the exhaust system after the catalytic converter on the bank 1 side of the engine. The oxygen sensor plays a crucial role in monitoring the oxygen levels in the exhaust gases, providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion efficiency.

OBDII Code P0037 GMC - HO2S Heater Control Circuit Low Voltage Bank 1 Sensor 2
P0037 GMC Code - HO2S Heater Control Circuit Low Voltage Bank 1 Sensor 2

Common Causes of P0037 GMC

  1. Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning oxygen sensor heating element.
  2. Wiring Issues: Damage or corrosion in the wiring connected to the oxygen sensor can disrupt the heater circuit.
  3. ECM Malfunction: A problem with the engine control module can prevent it from sending the correct signals to the oxygen sensor.
  4. Exhaust Leak: A leak in the exhaust system near the oxygen sensor can affect its performance.
  5. Blown Fuse: A blown fuse in the oxygen sensor heater circuit can cause the voltage to drop.

Symptoms of P0037 GMC

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Poor Fuel Economy: A malfunctioning oxygen sensor can lead to incorrect fuel mixture adjustments, resulting in decreased fuel efficiency.
  3. Rough Idle: An improperly functioning oxygen sensor can cause the engine to idle roughly or inconsistently.
  4. Failed Emissions Test: If the oxygen sensor is not working correctly, it can lead to increased emissions, causing the vehicle to fail emissions testing.

How to Fix P0037 GMC

  1. Diagnose the Issue: Use a scan tool to retrieve the specific trouble code and perform a visual inspection of the oxygen sensor and its wiring.
  2. Test the Oxygen Sensor: Check the resistance of the oxygen sensor's heating element to determine if it is functioning correctly.
  3. Inspect Wiring: Examine the wiring harness for any damage, corrosion, or loose connections, and repair or replace as needed.
  4. Check Fuses: Inspect the fuses related to the oxygen sensor heater circuit and replace any blown fuses.
  5. Replace Oxygen Sensor: If the heating element is faulty, replace the oxygen sensor with a new, OEM-quality part.

Cost to Fix P0037 GMC

The typical repair costs for addressing a P0037 code on a GMC vehicle can range from $150 to $400, including parts and labor. However, it's important to note that prices can vary depending on the specific make and model of the vehicle, the location of the repair shop, and the extent of the issue. Additionally, diagnosis time and labor rates at auto repair shops can fluctuate, with hourly rates typically falling between $80 and $150. It's recommended to obtain quotes from local shops to get a more accurate estimate for this repair.

What does this mean?

Tech Notes for P0037 GMC

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

Need more information about the P0037 GMC code?

Need more information on how to fix the P0037 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0037 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0037 GMC Code

1. What does the OBDII code P0037 mean for a GMC vehicle?

P0037 indicates a problem with the heater control circuit for the oxygen sensor (Bank 1, Sensor 2), specifically that it is detecting low voltage.

2. What are common symptoms of the P0037 code in a GMC?

Symptoms may include an illuminated check engine light, poor fuel efficiency, or a failed emissions test, though the vehicle may still drive normally.

3. What causes the P0037 code in a GMC?

Common causes include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or a malfunctioning powertrain control module (PCM).

4. Where is Bank 1 Sensor 2 located in a GMC?

Bank 1 Sensor 2 is located downstream of the catalytic converter on the side of the engine with cylinder 1.

5. Can a faulty oxygen sensor trigger the P0037 code?

Yes, a faulty oxygen sensor heater element is a common cause of the P0037 code.

6. How can I diagnose the P0037 code on my GMC?

Perform a visual inspection of the wiring and connectors, check for blown fuses, and use a multimeter to measure the resistance of the oxygen sensor heater circuit.

7. Can I drive my GMC with the P0037 code?

While the vehicle may remain drivable, prolonged operation with this code can lead to increased emissions and potential damage to the catalytic converter.

8. How do I fix the P0037 code on a GMC?

Common fixes include replacing the oxygen sensor, repairing damaged wiring, replacing blown fuses, or reprogramming the PCM if necessary.

9. How much does it cost to fix the P0037 code on a GMC?

Repair costs can vary, but replacing the oxygen sensor typically ranges from $100 to $300, depending on labor and parts.

10. Can a bad catalytic converter cause the P0037 code?

While rare, a bad catalytic converter can sometimes lead to issues with downstream oxygen sensor readings, but the code is more directly linked to the sensor or its circuitry.

Discuss the causes and fixes for P0037 GMC OBDII Code

Submit a New Comment

Code P0037 GMC comments

No comments found for this page.