P0037 Ford Code - HO2S Heater Control Circuit Low Bank 1 Sensor 2
Quick Answer
When the diagnostic trouble code P0037 appears on a Ford vehicle, it indicates an issue with the HO2S (Heated Oxygen Sensor) Heater Control Circuit for Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Damaged wiring or connectors in the sensor circuit, Blown fuse related to the heater circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0037 Ford indicates HO2S Heater Control Circuit Low Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Damaged wiring or connectors in the sensor circuit, Blown fuse related to the heater circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0037 Ford Description
When the diagnostic trouble code P0037 appears on a Ford vehicle, it indicates an issue with the HO2S (Heated Oxygen Sensor) Heater Control Circuit for Bank 1 Sensor 2. This sensor is responsible for monitoring the oxygen levels in the exhaust gases to help the engine control module (ECM) adjust the air-fuel mixture for optimal combustion. The heater control circuit is designed to keep the sensor at an optimal operating temperature for accurate readings.
Common Causes of P0037 Ford
- Faulty oxygen sensor
- Damaged wiring or connectors in the sensor circuit
- Blown fuse related to the heater circuit
- Malfunctioning ECM
- Exhaust leaks near the sensor
Symptoms of P0037 Ford
- Decreased fuel efficiency
- Rough idling or stalling
- Check Engine Light illuminated
- Failed emissions test
- Decreased engine performance
How to Fix P0037 Ford
- Begin by identifying the specific oxygen sensor causing the issue (Bank 1 Sensor 2 in this case).
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Check the fuse related to the heater circuit and replace if blown.
- Test the sensor's operation and, if found faulty, replace it with a new one.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0037 Ford
The typical repair costs for addressing the P0037 code on a Ford vehicle can range from $150 to $400, including parts and labor. Keep in mind that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's recommended to inquire with local shops for a more accurate estimate. Labor rates typically range from $80 to $150 per hour, with rates potentially higher in metropolitan areas or at dealerships, and lower at independent shops.
Need more information about the P0037 Ford code?
Need more information on how to fix the P0037 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0037 Ford code diagnosed by a professional: Find a repair shop in your area
Information for Specific Ford Models
- P0037 2015 Ford F150 — HO2S Heater Control Circuit Low Bank 1 Sensor 2
- P0037 2016 Ford F150 — HO2S Heater Control Circuit Low Bank 1 Sensor 2
- P0037 2017 Ford F150 — HO2S Heater Control Circuit Low Bank 1 Sensor 2
- P0037 2018 Ford F150 — HO2S Heater Control Circuit Low Bank 1 Sensor 2
- P0037 2019 Ford F150 — HO2S Heater Control Circuit Low Bank 1 Sensor 2
- P0037 2020 Ford F150 — HO2S Heater Control Circuit Low Bank 1 Sensor 2
Frequently Asked Questions about P0037 Ford Code
What does the OBDII code P0037 mean on a Ford vehicle?
P0037 indicates a problem with the Heater Control Circuit for the oxygen sensor (HO2S) on Bank 1, Sensor 2, where the circuit voltage is lower than expected.
What are the symptoms of code P0037 in a Ford?
Common symptoms include the check engine light turning on, reduced fuel efficiency, increased emissions, and possible failure to pass an emissions test.
What causes the P0037 code to appear?
Potential causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a malfunctioning powertrain control module (PCM), or a blown fuse.
Which oxygen sensor does P0037 refer to?
The code refers to the downstream oxygen sensor (Sensor 2) located on Bank 1, which is the side of the engine with cylinder 1.
Can I drive my Ford with the P0037 code?
While the vehicle may still be drivable, it’s not recommended as it can lead to higher emissions and reduced fuel efficiency, and may cause further damage over time.
How do I diagnose the P0037 code on my Ford?
Start by checking the wiring and connectors for the Bank 1, Sensor 2 oxygen sensor. Use a multimeter to test the sensor’s heater circuit resistance and ensure proper voltage supply.
How do I fix code P0037 on a Ford?
Common fixes include replacing the faulty oxygen sensor, repairing damaged wiring or connectors, and checking or replacing related fuses.
How much does it cost to repair the P0037 code?
The cost can vary, but oxygen sensor replacement typically ranges from $100 to $300, depending on labor rates and parts pricing.
Can a bad oxygen sensor cause other issues in my Ford?
Yes, a malfunctioning oxygen sensor can lead to poor fuel economy, increased emissions, and potential damage to the catalytic converter if not addressed.
How can I prevent the P0037 code from happening again?
Regular maintenance, including inspecting and replacing oxygen sensors as needed, checking wiring for damage, and ensuring good electrical connections, can help prevent this code.
Discuss the causes and fixes for P0037 Ford OBDII Code
Code P0037 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.