Engine-Codes.com
Engine-Codes – Chevrolet – P0037 2018 Chevrolet Silverado

P0037 2018 Chevrolet Silverado Code - HO2S Heater Control Circuit Low Voltage Bank 1 Sensor 2

Quick Answer

The P0037 diagnostic trouble code (DTC) for a 2018 Chevrolet Silverado indicates a problem with the HO2S (Heated Oxygen Sensor) Heater Control Circuit for Bank 1 Sensor 2. Common causes include Faulty HO2S sensor, Damaged wiring or connectors in the heater circuit, ECM software issue. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0037 2018 Chevrolet Silverado indicates HO2S Heater Control Circuit Low Voltage Bank 1 Sensor 2.
Common causes
Common causes include Faulty HO2S sensor, Damaged wiring or connectors in the heater circuit, ECM software issue.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Aug 19, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0037 2018 Chevrolet Silverado Description

The P0037 diagnostic trouble code (DTC) for a 2018 Chevrolet Silverado indicates a problem with the HO2S (Heated Oxygen Sensor) Heater Control Circuit for Bank 1 Sensor 2. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. The heater control circuit is designed to quickly bring the sensor up to operating temperature for accurate readings.

OBDII Code P0037 2018 Chevrolet Silverado - HO2S Heater Control Circuit Low Voltage Bank 1 Sensor 2
P0037 2018 Chevrolet Silverado Code - HO2S Heater Control Circuit Low Voltage Bank 1 Sensor 2

Common Causes of P0037 2018 Chevrolet Silverado

  1. Faulty HO2S sensor
  2. Damaged wiring or connectors in the heater circuit
  3. ECM software issue
  4. Blown fuse related to the HO2S heater circuit
  5. Engine coolant temperature sensor malfunction

Symptoms of P0037 2018 Chevrolet Silverado

  1. Check Engine Light illuminated
  2. Decreased fuel efficiency
  3. Rough idling or stalling
  4. Poor acceleration
  5. Increased emissions

How to Fix P0037 2018 Chevrolet Silverado

  1. Diagnose the root cause of the issue by performing a thorough inspection of the HO2S sensor, wiring, connectors, and related components.
  2. Test the HO2S sensor using a multimeter to check for proper resistance and voltage readings.
  3. Inspect and repair any damaged wiring or connectors in the heater circuit.
  4. Replace the HO2S sensor if it is determined to be faulty.
  5. Clear the DTC and reset the ECM to see if the issue has been resolved.

Cost to Fix P0037 2018 Chevrolet Silverado

The cost of repairing a P0037 code on a 2018 Chevrolet Silverado can vary depending on the specific cause of the issue. On average, the parts for this repair, such as a new HO2S sensor, can range from $50 to $200. Labor costs at auto repair shops typically range from $80 to $150 per hour, and the total repair bill could amount to $150 to $500 or more. It's recommended to consult with a professional mechanic to get an accurate estimate based on your vehicle's specific needs.

What does this mean?

Tech Notes for P0037 2018 Chevrolet Silverado

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

Need more information about the P0037 2018 Chevrolet Silverado code?

Need more information on how to fix the P0037 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0037 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0037 2018 Chevrolet Silverado Code

1. What does the OBDII code P0037 on a 2018 Chevrolet Silverado mean?

The code P0037 indicates a problem with the HO2S (Heated Oxygen Sensor) heater control circuit for Bank 1 Sensor 2, showing low voltage.

2. What are the common symptoms of OBDII code P0037 in a 2018 Chevrolet Silverado?

Common symptoms include poor fuel economy, rough idling, stalling, and the illumination of the check engine light.

3. What are the potential causes of OBDII code P0037 in a 2018 Chevrolet Silverado?

Possible causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or issues with the ECM (Engine Control Module).

4. How can I diagnose the OBDII code P0037 on my 2018 Chevrolet Silverado?

Diagnosing P0037 involves inspecting the oxygen sensor wiring, checking the sensor's heater resistance, testing the sensor's voltage, and verifying the functionality of related components.

5. Can I drive my 2018 Chevrolet Silverado with the OBDII code P0037 without immediate repair?

It is not recommended to drive with an unresolved P0037 code, as it can lead to decreased fuel efficiency and potential engine damage over time.

6. How do I repair OBDII code P0037 on my 2018 Chevrolet Silverado?

Repair steps may involve replacing the Bank 1 Sensor 2 oxygen sensor, repairing damaged wiring or connectors, checking and replacing fuses if necessary, and resetting the fault codes.

7. Are there any DIY tips for fixing OBDII code P0037 on a 2018 Chevrolet Silverado?

While basic checks like inspecting wiring and connectors can be done by DIY enthusiasts, it's recommended to consult a professional for accurate diagnosis and repair of the issue.

8. What is the typical cost to repair OBDII code P0037 on a 2018 Chevrolet Silverado?

The cost of repair can vary based on factors such as the labor rates in your area, the specific cause of the issue, and whether you choose OEM or aftermarket parts.

9. How long does it take to fix OBDII code P0037 on a 2018 Chevrolet Silverado?

The repair time for P0037 can range from around 1-2 hours for a straightforward sensor replacement to longer if extensive wiring diagnostics and repairs are required.

10. Can resetting the OBDII system clear the P0037 code on a 2018 Chevrolet Silverado temporarily?

Resetting the system may temporarily clear the code, but if the underlying issue causing P0037 is not addressed, the code is likely to reappear upon driving and further diagnostics.

Discuss the causes and fixes for P0037 2018 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P0037 2018 Chevrolet Silverado comments

No comments found for this page.