Engine-Codes.com
Engine-Codes – Nissan – P0037 2008 Nissan Altima Sedan

P0037 2008 Nissan Altima Sedan Code - HO2S12 Heater Control Circuit Low

Quick Answer

The P0037 diagnostic trouble code (DTC) specifically refers to the HO2S12 (Heated Oxygen Sensor 1 Bank 1) heater control circuit being detected as low. Common causes include Faulty oxygen sensor, Wiring or connector issues in the oxygen sensor circuit, Blown fuse related to the oxygen sensor heater circuit. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0037 2008 Nissan Altima Sedan indicates HO2S12 Heater Control Circuit Low.
Common causes
Common causes include Faulty oxygen sensor, Wiring or connector issues in the oxygen sensor circuit, Blown fuse related to the oxygen sensor heater circuit.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Aug 30, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0037 2008 Nissan Altima Sedan Description

The P0037 diagnostic trouble code (DTC) specifically refers to the HO2S12 (Heated Oxygen Sensor 1 Bank 1) heater control circuit being detected as low. In simpler terms, this code indicates that there is an issue with the heating element of the oxygen sensor located downstream from the catalytic converter. The purpose of the oxygen sensor is to measure the amount of oxygen in the exhaust gases and provide feedback to the engine control module (ECM) for proper air-fuel ratio adjustments.

OBDII Code P0037 2008 Nissan Altima Sedan - HO2S12 Heater Control Circuit Low
P0037 2008 Nissan Altima Sedan Code - HO2S12 Heater Control Circuit Low

Common Causes of P0037 2008 Nissan Altima Sedan

  1. Faulty oxygen sensor
  2. Wiring or connector issues in the oxygen sensor circuit
  3. Blown fuse related to the oxygen sensor heater circuit
  4. ECM software issue or malfunction
  5. Exhaust system leaks affecting sensor performance

Symptoms of P0037 2008 Nissan Altima Sedan

  1. Check engine light illuminated on the dashboard
  2. Decreased fuel efficiency
  3. Rough idling or misfiring
  4. Engine hesitation or stalling
  5. Failed emissions test

How to Fix P0037 2008 Nissan Altima Sedan

  1. Perform a visual inspection of the oxygen sensor wiring and connectors for any damage or corrosion.
  2. Test the oxygen sensor heater circuit for continuity using a multimeter to check for proper resistance.
  3. Replace the oxygen sensor if it is found to be faulty.
  4. Check and replace any blown fuses related to the oxygen sensor heater circuit.
  5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0037 2008 Nissan Altima Sedan

The cost of repairing a P0037 DTC can vary depending on the root cause of the issue and the labor rates in your area. Typically, the cost of replacing an oxygen sensor can range from $100 to $300, including parts and labor. Additional costs may apply if wiring repairs or ECM diagnostics are needed. It is advisable to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on your specific vehicle and location.

What does this mean?

Tech Notes for P0037 2008 Nissan Altima Sedan

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. Water getting inside the heated oxygen sensor connector can caused the heated oxygen sensor fuse to blow, which is a very common problem for this type codes. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors.

When is the Code Detected?

The P0037 is set when the ECM detects an excessively low voltage through the heated oxygen sensor heater circuit

Need more information about the P0037 2008 Nissan Altima Sedan code?

Need more information on how to fix the P0037 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0037 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0037 2008 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P0037 on a 2008 Nissan Altima Sedan?

- Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the Check Engine Light.

2. What does the OBDII code P0037 "HO2S12 Heater Control Circuit Low" mean for a 2008 Nissan Altima Sedan?

- This code indicates that the oxygen sensor (O2 sensor) located in bank 1 sensor 2 has detected a low voltage in the heater control circuit.

3. What are the possible causes of OBDII code P0037 on a 2008 Nissan Altima Sedan?

- The causes can include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or issues with the engine control module (ECM).

4. How can I diagnose the OBDII code P0037 on my 2008 Nissan Altima Sedan?

- You can diagnose this code by checking the wiring and connectors for any damage, testing the oxygen sensor, and inspecting the fuse related to the heater circuit.

5. What are some repair tips for addressing OBDII code P0037 on a 2008 Nissan Altima Sedan?

- Repair tips include replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, checking and replacing the fuse if necessary, and clearing the trouble code.

6. Can I continue driving my 2008 Nissan Altima Sedan with OBDII code P0037 active?

- While the vehicle may still be drivable, it is not recommended to ignore this code as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.

7. How much does it typically cost to repair OBDII code P0037 on a 2008 Nissan Altima Sedan?

- The cost of repairs can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Will resetting the Check Engine Light resolve OBDII code P0037 on a 2008 Nissan Altima Sedan?

- Resetting the Check Engine Light may temporarily turn it off, but it will not fix the underlying issue causing the code. It is important to diagnose and address the root cause of the problem.

9. How often does OBDII code P0037 occur in 2008 Nissan Altima Sedans?

- While not extremely common, this code can occur due to various factors like age, mileage, and environmental conditions affecting the vehicle.

10. Can a DIY enthusiast with basic automotive knowledge repair OBDII code P0037 on a 2008 Nissan Altima Sedan?

- Depending on the cause of the issue, a DIY enthusiast with basic automotive knowledge may be able to address this code by replacing the oxygen sensor or checking the wiring, but more complex repairs may require professional assistance.

Discuss the causes and fixes for P0037 2008 Nissan Altima Sedan OBDII Code

Submit a New Comment

Code P0037 2008 Nissan Altima Sedan comments

No comments found for this page.