P0028 - Intake valve Control Solenoid Circuit Range/Performance Bank 2
P0028 Possible Causes
- Dirty engine oil
- Low engine oil level
- Faulty intake valve control solenoid
- Intake valve control solenoid harness is open or shorted
- Intake valve control solenoid circuit poor electrical connection
First diagnose P0028 code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P0028 code
Labor: 1.0The cost of diagnosing the P0028 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P0028 Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0028 MeaningThe Continuously Variable Valve Timing (CVVT) system is installed to the chain sprocket of the intake camshaft. This system controls the intake camshaft to provide the optimal valve timing. The Engine Control Module (ECM) controls the Oil Control Valve(OCV), based on the signals output from mass air flow, throttle position and engine coolant temperature. The CVVT controller regulates the intake camshaft angle using oil pressure through the OCV. As result, the relative position between the camshaft and the crankshaft becomes optimal, and the engine torque improves, fuel economy improves, exhaust emissions decrease under overall driving conditions.
P0028 More InformationNeed more information on how to fix the P0028 code?
Get Access to Factory Service Manuals