P0016 2016 GMC Sierra Code - Crankshaft Position - Intake Camshaft Position Not Plausible
Quick Answer
The P0016 code for a 2016 GMC Sierra indicates a problem with the synchronization between the crankshaft position sensor and the intake camshaft position sensor. Common causes include Faulty crankshaft position sensor, Faulty intake camshaft position sensor, Timing chain or belt issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0016 2016 GMC Sierra indicates Crankshaft Position - Intake Camshaft Position Not Plausible.
- Common causes
- Common causes include Faulty crankshaft position sensor, Faulty intake camshaft position sensor, Timing chain or belt issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0016 2016 GMC Sierra Description
The P0016 code for a 2016 GMC Sierra indicates a problem with the synchronization between the crankshaft position sensor and the intake camshaft position sensor. This lack of alignment can lead to incorrect fuel injection timing, which can result in poor engine performance, decreased fuel efficiency, and potential damage to the engine over time. The engine control module (ECM) uses data from these sensors to ensure the engine runs smoothly and efficiently.
Common Causes of P0016 2016 GMC Sierra
- Faulty crankshaft position sensor
- Faulty intake camshaft position sensor
- Timing chain or belt issues
- Incorrectly installed sensors
- Wiring or connector issues
Symptoms of P0016 2016 GMC Sierra
- Rough idling or stalling
- Decreased fuel efficiency
- Engine misfires
- Check Engine Light illuminated
- Engine performance issues such as hesitation or lack of power
How to Fix P0016 2016 GMC Sierra
- Diagnose the issue by using a scan tool to read the code and check the sensors' operation.
- Inspect the crankshaft position sensor and intake camshaft position sensor for any damage or wear.
- Check the timing chain or belt for proper alignment and tension.
- Replace any faulty sensors or components.
- Reset the fault codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0016 2016 GMC Sierra
The typical repair costs for addressing a P0016 code in a 2016 GMC Sierra can range from $200 to $600, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's recommended to inquire with local auto repair shops for a more accurate estimate.
Need more information about the P0016 2016 GMC Sierra code?
Need more information on how to fix the P0016 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0016 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0016 2016 GMC Sierra Code
What does the P0016 code mean for a 2016 GMC Sierra?
The P0016 code indicates a misalignment or correlation issue between the crankshaft and intake camshaft position sensors.
What are the common symptoms of the P0016 code?
Symptoms may include rough idling, poor engine performance, stalling, hard starting, and the check engine light turning on.
What causes the P0016 code on a 2016 GMC Sierra?
Common causes include a faulty timing chain, stretched timing belt, worn timing components, a defective crankshaft or camshaft position sensor, or incorrect sensor wiring.
Can driving with the P0016 code damage my engine?
Yes, prolonged driving with this code can cause severe engine damage due to improper timing, potentially leading to costly repairs.
How can I diagnose the P0016 code?
Diagnosis involves using an OBD-II scanner, inspecting the timing chain or belt, checking the crankshaft and camshaft position sensors, and verifying wiring connections.
Is the P0016 code related to low oil levels?
Yes, low oil levels or dirty oil can affect the performance of the variable valve timing system, contributing to this code.
How much does it cost to fix the P0016 code?
Repair costs can vary based on the cause but may range from $200 for sensor replacement to over $1,000 for timing chain repairs.
Can a faulty crankshaft position sensor trigger the P0016 code?
Yes, a defective crankshaft position sensor can cause this code by providing incorrect position data to the engine control module.
What tools are needed to repair the P0016 code?
You may need an OBD-II scanner, timing tools, basic hand tools, and possibly a repair manual for detailed instructions.
Should I replace the timing chain or belt for the P0016 code?
If the timing chain or belt is stretched or worn, replacement is necessary to resolve the issue and prevent further engine damage.
Discuss the causes and fixes for P0016 2016 GMC Sierra OBDII Code
Code P0016 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.