P0014 GMC Code - Exhaust Camshaft Position System Performance
Quick Answer
The P0014 GMC code indicates that there is a performance issue with the Exhaust Camshaft Position System in the vehicle. Common causes include Faulty camshaft position sensor, Timing chain or belt issues, Oil flow restrictions to the camshaft phaser. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0014 GMC indicates Exhaust Camshaft Position System Performance.
- Common causes
- Common causes include Faulty camshaft position sensor, Timing chain or belt issues, Oil flow restrictions to the camshaft phaser.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0014 GMC Description
The P0014 GMC code indicates that there is a performance issue with the Exhaust Camshaft Position System in the vehicle. This system is responsible for regulating the timing of the exhaust camshaft in relation to the crankshaft, ensuring optimal engine performance. When this system is not functioning correctly, it can lead to a range of issues that affect the vehicle's overall performance and fuel efficiency.
Common Causes of P0014 GMC
- Faulty camshaft position sensor
- Timing chain or belt issues
- Oil flow restrictions to the camshaft phaser
- Wiring or electrical issues
- Engine mechanical problems
Symptoms of P0014 GMC
- Check Engine Light illuminated on the dashboard
- Rough idling or engine misfires
- Loss of power or acceleration
- Engine stalling or difficulty starting
- Decreased fuel efficiency
How to Fix P0014 GMC
- Begin by diagnosing the specific cause of the P0014 code using a diagnostic scanner to pinpoint the exact issue.
- Inspect the camshaft position sensor and replace it if faulty.
- Check the timing chain or belt for wear or misalignment and replace if necessary.
- Inspect the oil passages and the camshaft phaser for any blockages or restrictions.
- Verify the wiring and electrical connections related to the camshaft position sensor for any damage or loose connections.
Cost to Fix P0014 GMC
The repair costs for addressing the P0014 GMC code can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $200 to $500 for parts and labor. Keep in mind that diagnostic time and labor rates can vary, so it's recommended to get a detailed estimate from a reputable auto repair shop.
Tech Notes for P0014 GMC
2004-2011 GMC Envoy
2004-2012 GMC Conyon
GMC Envoy, Canyon Factory Service Bulletin OBDII Code P0014
User Submitted Video
Need more information about the P0014 GMC code?
Need more information on how to fix the P0014 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0014 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0014 GMC Code
1. What are common symptoms of OBDII code P0014 in a GMC vehicle?
The common symptoms of OBDII code P0014 in a GMC vehicle may include rough idling, poor engine performance, reduced fuel efficiency, and the illumination of the check engine light.
2. What is the primary cause of OBDII code P0014 in a GMC vehicle?
The primary cause of OBDII code P0014 in a GMC vehicle is often a malfunctioning exhaust camshaft position actuator solenoid.
3. How can I diagnose the OBDII code P0014 in my GMC vehicle?
Diagnosing OBDII code P0014 in a GMC vehicle typically involves using a scan tool to retrieve the trouble code, inspecting the camshaft position actuator solenoids, and checking for any electrical or mechanical issues in the system.
4. What are some repair tips for resolving OBDII code P0014 in a GMC vehicle?
Repair tips for resolving OBDII code P0014 in a GMC vehicle may include replacing the faulty exhaust camshaft position actuator solenoid, inspecting and repairing any damaged wiring or connectors, and performing an engine oil change if necessary.
5. Can driving with OBDII code P0014 in a GMC vehicle cause further damage?
Continuing to drive with OBDII code P0014 in a GMC vehicle may lead to further damage to the engine components, reduced fuel efficiency, and potential engine stalling, so it is recommended to address the issue promptly.
6. Are there any safety concerns associated with OBDII code P0014 in a GMC vehicle?
While OBDII code P0014 itself may not pose immediate safety concerns, the symptoms associated with the code, such as engine performance issues, could affect the vehicle's drivability and should be addressed to ensure safe operation.
7. How much does it typically cost to repair OBDII code P0014 in a GMC vehicle?
The cost of repairing OBDII code P0014 in a GMC vehicle can vary depending on the extent of the issue, the parts needed for repair, and labor costs. It is recommended to consult with a mechanic for an accurate estimate.
8. Can OBDII code P0014 in a GMC vehicle be triggered by a faulty camshaft position sensor?
While a faulty camshaft position sensor can sometimes trigger OBDII code P0014, the code is more commonly associated with issues related to the exhaust camshaft position actuator solenoid.
9. Will resetting the check engine light resolve OBDII code P0014 in a GMC vehicle?
Resetting the check engine light may temporarily turn off the light, but it will not resolve the underlying issue causing OBDII code P0014 in a GMC vehicle. It is important to diagnose and address the root cause of the problem.
10. How long does it take to repair OBDII code P0014 in a GMC vehicle?
The time needed to repair OBDII code P0014 in a GMC vehicle can vary depending on the specific issue and the expertise of the mechanic. In general, the repair process may take a few hours to complete.
Discuss the causes and fixes for P0014 GMC OBDII Code
-
The exhaust and intake solenoid have been replaced and I still get the P0014 code.
-
The factory service bulletin recommends replacing both camshaft position actuator solenoid valves as you did, and that usually takes care of the problem.
According to a national database of repairs for the P0014 code on the 2011 GMC Terrain 2.4 Lt, other than the camshaft position actuator solenoid valves, the most common problem that will set the code is the Camshaft Position Sensor. -
Ok, I’ve ordered the camshaft position sensor but am confused a little as to where it’s located on the engine and are the camshaft sensor and the crankshaft sensor the same and each can be replaced by the same sensor? There was only one sensor available is why I ask. Nothing depicting the two different sensors.
Thanks -
Camshaft Position Sensor and Crankshaft Position Sensor are different components. In you vehicle the function and shape is different. In some other vehicles the shape is the same.
Camshaft Position Sensor
Read more: https://www.autocodes.com/a...Crankshaft Position Sensor
Read more: https://www.autocodes.com/a...
Click here to enlarge image -
You can check resistance of the sensor, but that test is not accurate. As far as I know the best way to check is with an oscilloscope and with the engine running.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.